Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1002.0233 · New Journal of Physics

Laser cooling of a magnetically guided ultracold atom beam

A Aghajani-Talesh, M Falkenau, Valentin Volchkov, L E Trafford, Tilman Pfau, A Griesmaier

Published Jun 28, 2010• 9 citations
arXivHTMLPDF

Abstract

We report on the transverse laser cooling of a magnetically guided beam of ultracold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section, heat is extracted from the atom beam by a two-dimensional (2D) optical molasses perpendicular to it, resulting in a significant increase in atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that, by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 μK have been achieved, corresponding to an increase in phase space density in the guided beam by more than a factor of 30.

DOI
10.1088/1367-2630/12/6/065018

Related papers

Laser cooling of a magnetically guided ultra cold atom beam

Anoush Aghajani-Talesh

This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.

•Jan 1, 2014•9 citations

A high flux of ultra-cold chromium atoms in a magnetic guide

Axel Griesmaier, Anoush Aghajani-Talesh, Markus Falkenau +3 more

We report the observation of a very high flux of ultra-cold bosonic chromium atoms in a magnetic guide. The beam is created by operating a magneto-optical trap/moving optical molasses within the magnetic field of the guide. A relative detuning between two pairs of the cooling lasers cools the atoms into a frame moving along the axes of the guide. When the atoms are cooled into a moving frame with a velocity of 6 m s −1 we observe a maximum of the flux of 6 × 10 9 atoms s −1 . For these parameters the transversal temperature of the atoms after a 25 fold increase of the confining magnetic potential is about 1.2 mK. The longitudinal temperature is 400 µK.

Journal of Physics B Atomic Molecular and Optical Physics•Jun 24, 2009•10 citations

2D laser collimation of a cold Cs beam induced by a transverse B field

Mark D. Plimmer, N. Castagna, Giovanni Di Domenico +3 more

We describe transverse collimation of a continuous cold cesium beam (longitudinal temperature 75 μK) induced by a two-dimensional, blue-detuned near-resonant optical lattice. The mechanism described for a lin-‖-lin configuration is made possible by the application of a transverse magnetic field B ⊥. The phenomenon described differs from gray molasses, for which any small magnetic field degrades cooling, as well as from magnetically induced laser cooling in red-detuned optical molasses, where there are no dark states. The lowest transverse temperature is experimentally found to vary as B ⊥ 2 . The collimated flux density shows a dip as a function of B ⊥, the width of which is proportional to the cube root of the laser intensity, general features predicted by our semiclassical model. This technique provides a sensitive tool for canceling transverse magnetic fields in situ at the milligauss level.

Journal of Experimental and Theoretical Physics Letters•Jul 1, 2005•2 citations

Atom guiding and cooling in a dark hollow laser beam

Jianping Yin, Yifu Zhu, Wonho Jhe +1 more

We propose and analyze theoretically a scheme for atomic guiding and cooling in a dark hollow laser beam generated from the collimated output beam of a ${\mathrm{LP}}_{01}$ mode in a micrometer-sized hollow optical fiber. In the scheme, cold atoms from a magneto-optical trap are loaded into the blue-detuned dark hollow beam, move down in the dark hollow beam, and experience transverse Sisyphus cooling induced by the dark hollow beam and a weak repumping beam. In the longitudinal direction, the guided atoms experience heating from the gravity field and cooling from the upward-propagating dark hollow beam and repumping beam. We estimate the transverse two-dimensional equilibrium temperature, the final longitudinal mean velocity, and the total loss of the guided atoms. Our calculations show that a transverse equilibrium temperature of $\ensuremath{\sim}1.2\ensuremath{\mu}\mathrm{K},$ a final longitudinal mean velocity of 0--4.41 m/s, and a guiding efficiency of 65--95 % may be obtained.

Physical Review A•Jul 1, 1998•104 citations

An ultracold molecular beam for testing fundamental physics

Xavier Alauze, Jongseok Lim, M. A. Trigatzis +5 more

Abstract We use two-dimensional transverse laser cooling to produce an ultracold beam of YbF molecules. Through experiments and numerical simulations, we study how the cooling is influenced by the polarization configuration, laser intensity, laser detuning and applied magnetic field. The ultracold part of the beam contains more than 2 × 105 molecules per shot and has a temperature below 200 μK, and the cooling yields a 300-fold increase in the brightness of the beam. The method can improve the precision of experiments that use molecules to test fundamental physics. In particular, the beam is suitable for measuring the electron electric dipole moment with a statistical precision better than 10−30 e cm.

arXiv:2104.06194•Quantum Science and Technology•Jul 1, 2021•41 citations

Toward an atom laser: Cold atoms in a long, high-gradient magnetic guide

Rahul R. Mhaskar

The propagation of an atomic beam through a 1.7 m long magnetic guide with magnetic field gradient of up to 2.7 kGauss/cm has been demonstrated. The guide is side-loaded with an atomic beam from a Pyramidal MOT Low-velocity Intense Source. The atomic beam observed at the end of the guide has a flux of 3×10e7 atoms/s with a velocity of 1.2 m/s, a transverse temperature of 420±40 μK and a longitudinal temperature of 1 mK. The guided atomic beam was mode-filtered by selective removal of high-energy atoms using radio-frequency coupling to magnetically untrapped states. We found that the phase-space density of the atomic beam was very low for evaporative cooling to be functional. An imaging technique was developed to characterize the guided atomic flow in the presence of a high magnetic field gradient. This technique utilizes the open-channel transition to obtain nearly constant photon yield per atom independent of the location of the atom in the guide, providing a mapping of the fluorescence images to the atomic-density profiles. This technique was theoretically studied using Quantum Monte-Carlo Simulations and validated. A Zeeman slower was constructed and characterized to be used as the primary source of atoms to the magnetic guide. The Zeeman slower output atomic beam has a flux of 3×10e11 atoms/s at a velocity of 40 m/s. We have designed a new injection scheme to transfer atoms from the Zeeman slower to the magnetic guide efficiently. The details of a new method to evaporatively cool atoms in the magnetic guide using surface adsorption are described. Finally, a new guide geometry based on a spiral structure is discussed.

•Jan 1, 2008•1 citation
We report on the transverse laser cooling of a magnetically guided beam of ultracold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section, heat is extracted from the atom beam by a two-dimensional (2D) optical molasses perpendicular to it, resulting in a significant increase in atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that, by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 μK have been achieved, corresponding to an increase in phase space density in the guided beam by more than a factor of 30.
This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.
We report the observation of a very high flux of ultra-cold bosonic chromium atoms in a magnetic guide. The beam is created by operating a magneto-optical trap/moving optical molasses within the magnetic field of the guide. A relative detuning between two pairs of the cooling lasers cools the atoms into a frame moving along the axes of the guide. When the atoms are cooled into a moving frame with a velocity of 6 m s −1 we observe a maximum of the flux of 6 × 10 9 atoms s −1 . For these parameters the transversal temperature of the atoms after a 25 fold increase of the confining magnetic potential is about 1.2 mK. The longitudinal temperature is 400 µK.
We describe transverse collimation of a continuous cold cesium beam (longitudinal temperature 75 μK) induced by a two-dimensional, blue-detuned near-resonant optical lattice. The mechanism described for a lin-‖-lin configuration is made possible by the application of a transverse magnetic field B ⊥. The phenomenon described differs from gray molasses, for which any small magnetic field degrades cooling, as well as from magnetically induced laser cooling in red-detuned optical molasses, where there are no dark states. The lowest transverse temperature is experimentally found to vary as B ⊥ 2 . The collimated flux density shows a dip as a function of B ⊥, the width of which is proportional to the cube root of the laser intensity, general features predicted by our semiclassical model. This technique provides a sensitive tool for canceling transverse magnetic fields in situ at the milligauss level.
We propose and analyze theoretically a scheme for atomic guiding and cooling in a dark hollow laser beam generated from the collimated output beam of a LP01{\mathrm{LP}}_{01}LP01​ mode in a micrometer-sized hollow optical fiber. In the scheme, cold atoms from a magneto-optical trap are loaded into the blue-detuned dark hollow beam, move down in the dark hollow beam, and experience transverse Sisyphus cooling induced by the dark hollow beam and a weak repumping beam. In the longitudinal direction, the guided atoms experience heating from the gravity field and cooling from the upward-propagating dark hollow beam and repumping beam. We estimate the transverse two-dimensional equilibrium temperature, the final longitudinal mean velocity, and the total loss of the guided atoms. Our calculations show that a transverse equilibrium temperature of $\ensuremath{\sim}1.2\ensuremath{\mu}\mathrm{K},$ a final longitudinal mean velocity of 0--4.41 m/s, and a guiding efficiency of 65--95 % may be obtained.
Abstract We use two-dimensional transverse laser cooling to produce an ultracold beam of YbF molecules. Through experiments and numerical simulations, we study how the cooling is influenced by the polarization configuration, laser intensity, laser detuning and applied magnetic field. The ultracold part of the beam contains more than 2 × 105 molecules per shot and has a temperature below 200 μK, and the cooling yields a 300-fold increase in the brightness of the beam. The method can improve the precision of experiments that use molecules to test fundamental physics. In particular, the beam is suitable for measuring the electron electric dipole moment with a statistical precision better than 10−30 e cm.
The propagation of an atomic beam through a 1.7 m long magnetic guide with magnetic field gradient of up to 2.7 kGauss/cm has been demonstrated. The guide is side-loaded with an atomic beam from a Pyramidal MOT Low-velocity Intense Source. The atomic beam observed at the end of the guide has a flux of 3×10e7 atoms/s with a velocity of 1.2 m/s, a transverse temperature of 420±40 μK and a longitudinal temperature of 1 mK. The guided atomic beam was mode-filtered by selective removal of high-energy atoms using radio-frequency coupling to magnetically untrapped states. We found that the phase-space density of the atomic beam was very low for evaporative cooling to be functional. An imaging technique was developed to characterize the guided atomic flow in the presence of a high magnetic field gradient. This technique utilizes the open-channel transition to obtain nearly constant photon yield per atom independent of the location of the atom in the guide, providing a mapping of the fluorescence images to the atomic-density profiles. This technique was theoretically studied using Quantum Monte-Carlo Simulations and validated. A Zeeman slower was constructed and characterized to be used as the primary source of atoms to the magnetic guide. The Zeeman slower output atomic beam has a flux of 3×10e11 atoms/s at a velocity of 40 m/s. We have designed a new injection scheme to transfer atoms from the Zeeman slower to the magnetic guide efficiently. The details of a new method to evaporatively cool atoms in the magnetic guide using surface adsorption are described. Finally, a new guide geometry based on a spiral structure is discussed.