Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Toward an atom laser: Cold atoms in a long, high-gradient magnetic guide

Rahul R. Mhaskar

Published Jan 1, 2008• 1 citation
OpenAlex

Abstract

The propagation of an atomic beam through a 1.7 m long magnetic guide with magnetic field gradient of up to 2.7 kGauss/cm has been demonstrated. The guide is side-loaded with an atomic beam from a Pyramidal MOT Low-velocity Intense Source. The atomic beam observed at the end of the guide has a flux of 3×10e7 atoms/s with a velocity of 1.2 m/s, a transverse temperature of 420±40 μK and a longitudinal temperature of 1 mK. The guided atomic beam was mode-filtered by selective removal of high-energy atoms using radio-frequency coupling to magnetically untrapped states. We found that the phase-space density of the atomic beam was very low for evaporative cooling to be functional. An imaging technique was developed to characterize the guided atomic flow in the presence of a high magnetic field gradient. This technique utilizes the open-channel transition to obtain nearly constant photon yield per atom independent of the location of the atom in the guide, providing a mapping of the fluorescence images to the atomic-density profiles. This technique was theoretically studied using Quantum Monte-Carlo Simulations and validated. A Zeeman slower was constructed and characterized to be used as the primary source of atoms to the magnetic guide. The Zeeman slower output atomic beam has a flux of 3×10e11 atoms/s at a velocity of 40 m/s. We have designed a new injection scheme to transfer atoms from the Zeeman slower to the magnetic guide efficiently. The details of a new method to evaporatively cool atoms in the magnetic guide using surface adsorption are described. Finally, a new guide geometry based on a spiral structure is discussed.

Related papers

Long, high -gradient magnetic atom guide and progress towards an atom laser.

Spencer E. Olson

The continuous injection and propagation of a cold atomic beam in a 1.7 m long high-gradient (up to 2.7 kG/cm) magnetic guide is demonstrated. Continuous injection is accomplished by side-loading a magnetic guide with atoms from a sequence of two modified magneto-optical traps. In the high-gradient portion of the guide, the guided atomic beam has a transverse temperature of 420 muK +/- 40 muK, a longitudinal temperature of 1 mK, and an average velocity of order 1 m/s. Essential for the characterization of this steady-state atomic beam, imaging methods compatible with the high field-gradients associated with this magnetic guide have been investigated and developed. By utilizing a probe laser tuned to an open transition, the fluorescence yield per atom is largely fixed throughout the trap volume, independent of the trapping field. This enables a reliable conversion of fluorescence images into atomic-density profiles. Using a fixed radio-frequency (nurf) current coupled directly onto the guide wires, continuous and selective removal of atoms with a transverse energy exceeding hnurf is demonstrated. This removal scheme is the essence of an rf filter, where the number of modes occupied by the atomic flow is reduced. Through sufficient rf-filtering, a near-single-mode guided atomic beam should be achievable, enabling basic atom-interferometric experiments. The extension of this fixed-frequency removal of atoms for continuous position-resolved evaporative cooling in a long magnetic guide is outlined. Employing an innovative gridless technique for performing Direct Simulation of rarefied gas dynamics via Monte Carlo (DSMC), the evaporative cooling process in a guided atomic beam has been simulated. Both fixed-frequency as well as variable-frequency evaporative cooling layouts have been explored and the results of these simulations are presented. The implementation of this gridless technique is presented and its benefits are briefly outlined. In parallel with the development of a continuous-wave atom laser, tools suited to manipulate cold atomic beams in atom guides have been explored. An atomic guide with a tunable aspect ratio, using rf-dressed state potentials, is presented.

•Jan 1, 2006•0 citations

Continuous propagation and energy filtering of a cold atomic beam in a long high-gradient magnetic atom guide

Spencer E. Olson, Rahul R. Mhaskar, Georg A. Raithel

We demonstrate the continuous injection and propagation of a cold atomic beam in a high-gradient (up to $2.7\phantom{\rule{0.3em}{0ex}}\mathrm{kG}∕\mathrm{cm}$) magnetic guide of $1.7\phantom{\rule{0.3em}{0ex}}\mathrm{m}$ length. Continuous injection is accomplished using a side-loading scheme that involves a sequence of two modified magneto-optic traps. Methods are developed to measure the atomic-flow temperatures and the flux under steady-state conditions. In the high-gradient portion of the guide, the guided atomic beam has a transverse temperature of $420\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{K}\ifmmode\pm\else\textpm\fi{}40\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{K}$, a longitudinal temperature of $1\phantom{\rule{0.3em}{0ex}}\mathrm{mK}$, and an average velocity of order $1\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}$. Using a radio-frequency current of a fixed frequency $\ensuremath{\nu}$ coupled directly into the guide wires, atoms exceeding a transverse energy of $h\ensuremath{\nu}$ can be continuously and selectively removed from the atomic beam.

Physical Review A•Mar 29, 2006•28 citations

Injection of a cold atomic beam into a magnetic guide

Christian F. Roos, P. Cren, Thierry Lahaye +2 more

We report the continuous or pulsed loading of a slow and cold atomic beam into a magnetic guide. In order to optimize the transfer into the guide, we have studied two coupling schemes. The first one is based on an auxiliary two-dimensional MOT that confines the atoms transversally before they enter the guide. However, for low atomic velocities, the atoms are strongly heated in the longitudinal direction. This limitation does not occur in the second coupling scheme which relies on magnetic confinement in the transfer zone. For this purpose, we have constructed a miniature magnetic guide located between the atomic source and the long magnetic guide. The latter scheme allows to inject atoms with velocities down to 70 cm/s into the guide.

arXiv:cond-mat/0212147•Dec 6, 2002•6 citations

Laser cooling of a magnetically guided ultra cold atom beam

Anoush Aghajani-Talesh

This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.

•Jan 1, 2014•9 citations

Shock wave loading of a magnetic guide

L. Kindt

The atom laser has long been a holy grail within atom physics and with the creation of an atom laser we hope to bring a similar revolution in to the field of atom optics. With the creation of the Bose-Einstein Condensate (BEC) in 1995 the path to an atom laser was initiated. An atom laser is continues source of BEC. In a Bose condensate all the atoms occupy the same quantum state and can be described by the same wave function and phase. With an atom laser the De Broglie wavelength of atoms can be much smaller than the wavelength of light. Due to the ultimate control over the atoms the atom laser is very interesting for atom optics, lithography, metrology, etching and deposition of atoms on a surface. All previous atom lasers have been created from atoms coupled out from an existing Bose-Einstein Condensate. There are different approaches but common to them all is that the duration of the output of the atom laser is limited by the size of the initial BEC and they all have a low flux. This leaves the quest to build a continuous high flux atom laser. An alternative approach to a continuous BEC beam is to channel a continuous ultra cold atomic beam into a magnetic guide and then cool this beam down to degeneracy. Cooling down a continuous beam of atoms faces three large problems: The collision rate has to be large enough for effective rethermalization, since evaporative cooling in 2D is not as effective as in 3D and a large thermal conductivity due to atoms with a high angular momentum causes heating downstream in the guide. We have built a 4 meter magnetic guide that is placed on a downward slope with a magnetic barrier in the end. In the guide we load packets of ultra cold rubidium atoms with a frequency rate large enough for the packets to merge together to form a continuous atomic beam. The atomic beam is supersonic and when the beam reaches the end barrier it will return and collide with itself. The collisions lowers the velocity of the beam into subsonic velocities and a shock wave is created between the two velocity regions. In order to conserve number of particle, momentum and enthalpy the density of the atomic beam passing through the shock wave must increase. We have build such a shock wave in an atomic beam and observed the density increase due to this. As an extra feature having a subsonic beam on a downward slope adds an extra density increase due to gravitational compression. Loading ultra cold atoms into a 3D trap from the dense subsonic beam overcomes the problem with 2D cooling and thermal conductivity. This was done and evaporative cooling was applied creating an unprecedented large number rubidium BEC.

•Oct 21, 2011•1 citation

Linear Atom Guides: Guiding Rydberg Atoms and Progress Toward an Atom Laser.

Mallory Traxler

In this thesis, I explore a variety of experiments within linear, two-wire, magnetic atom guides. Experiments include guiding of Rydberg atoms; transferring between states while keeping the atoms contained within the guide; and designing, constructing, and testing a new experimental apparatus. The ultimate goal of the atom guiding experiments is to develop a continuous atom laser. The guiding of Rydberg atoms is demonstrated. The evolution of the atoms is driven by the combined effects of dipole forces acting on the center-of-mass degree of freedom as well as internal-state transitions. Time delayed microwave and state-selective field ionization are used to investigate the evolution of the internal-state distribution as well as the Rydberg atom motion while traversing the guide. The observed decay time of the guided-atom signal is about five times that of the initial state. A population transfer between Rydberg states contributes to this lengthened lifetime, and also broadens the observed field ionization spectrum. Transfer from one guided ground state to another is studied. In our setup, before the atoms enter the guide, they are pumped into the $|F=1, m_F=-1rangle$ state. Using two repumpers, one tuned to the $F=1rightarrow F'=0$ transition and the other tuned to the $F=1rightarrow F'=2$ transition, the atoms are pumped between these guided states. Magnetic reflections within the guide are also studied. Design and construction of a new linear magnetic atom guide is detailed. This guide~$beta$ has many improvements over the original guide~$alpha$: a Zeeman slower, magnetic injection, a physical shutter, and surface adsorption evaporative cooling are some of the main changes. Testing of this new system is underway. It is hoped that the improvements to guide~$beta$ will yield an atom density sufficient to reach degeneracy, thereby forming a continuous BEC at the end of the guide. The BEC, which will be continuously replenished by the atoms within the guide, will be outcoupled to form a continuous atom laser.

•Jan 1, 2013•0 citations
The propagation of an atomic beam through a 1.7 m long magnetic guide with magnetic field gradient of up to 2.7 kGauss/cm has been demonstrated. The guide is side-loaded with an atomic beam from a Pyramidal MOT Low-velocity Intense Source. The atomic beam observed at the end of the guide has a flux of 3×10e7 atoms/s with a velocity of 1.2 m/s, a transverse temperature of 420±40 μK and a longitudinal temperature of 1 mK. The guided atomic beam was mode-filtered by selective removal of high-energy atoms using radio-frequency coupling to magnetically untrapped states. We found that the phase-space density of the atomic beam was very low for evaporative cooling to be functional. An imaging technique was developed to characterize the guided atomic flow in the presence of a high magnetic field gradient. This technique utilizes the open-channel transition to obtain nearly constant photon yield per atom independent of the location of the atom in the guide, providing a mapping of the fluorescence images to the atomic-density profiles. This technique was theoretically studied using Quantum Monte-Carlo Simulations and validated. A Zeeman slower was constructed and characterized to be used as the primary source of atoms to the magnetic guide. The Zeeman slower output atomic beam has a flux of 3×10e11 atoms/s at a velocity of 40 m/s. We have designed a new injection scheme to transfer atoms from the Zeeman slower to the magnetic guide efficiently. The details of a new method to evaporatively cool atoms in the magnetic guide using surface adsorption are described. Finally, a new guide geometry based on a spiral structure is discussed.
The continuous injection and propagation of a cold atomic beam in a 1.7 m long high-gradient (up to 2.7 kG/cm) magnetic guide is demonstrated. Continuous injection is accomplished by side-loading a magnetic guide with atoms from a sequence of two modified magneto-optical traps. In the high-gradient portion of the guide, the guided atomic beam has a transverse temperature of 420 muK +/- 40 muK, a longitudinal temperature of 1 mK, and an average velocity of order 1 m/s. Essential for the characterization of this steady-state atomic beam, imaging methods compatible with the high field-gradients associated with this magnetic guide have been investigated and developed. By utilizing a probe laser tuned to an open transition, the fluorescence yield per atom is largely fixed throughout the trap volume, independent of the trapping field. This enables a reliable conversion of fluorescence images into atomic-density profiles. Using a fixed radio-frequency (nurf) current coupled directly onto the guide wires, continuous and selective removal of atoms with a transverse energy exceeding hnurf is demonstrated. This removal scheme is the essence of an rf filter, where the number of modes occupied by the atomic flow is reduced. Through sufficient rf-filtering, a near-single-mode guided atomic beam should be achievable, enabling basic atom-interferometric experiments. The extension of this fixed-frequency removal of atoms for continuous position-resolved evaporative cooling in a long magnetic guide is outlined. Employing an innovative gridless technique for performing Direct Simulation of rarefied gas dynamics via Monte Carlo (DSMC), the evaporative cooling process in a guided atomic beam has been simulated. Both fixed-frequency as well as variable-frequency evaporative cooling layouts have been explored and the results of these simulations are presented. The implementation of this gridless technique is presented and its benefits are briefly outlined. In parallel with the development of a continuous-wave atom laser, tools suited to manipulate cold atomic beams in atom guides have been explored. An atomic guide with a tunable aspect ratio, using rf-dressed state potentials, is presented.
We demonstrate the continuous injection and propagation of a cold atomic beam in a high-gradient (up to 2.7kG∕cm2.7\phantom{\rule{0.3em}{0ex}}\mathrm{kG}∕\mathrm{cm}2.7kG∕cm) magnetic guide of 1.7m1.7\phantom{\rule{0.3em}{0ex}}\mathrm{m}1.7m length. Continuous injection is accomplished using a side-loading scheme that involves a sequence of two modified magneto-optic traps. Methods are developed to measure the atomic-flow temperatures and the flux under steady-state conditions. In the high-gradient portion of the guide, the guided atomic beam has a transverse temperature of $420\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{K}\ifmmode\pm\else\textpm\fi{}40\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{K}$, a longitudinal temperature of 1mK1\phantom{\rule{0.3em}{0ex}}\mathrm{mK}1mK, and an average velocity of order 1m∕s1\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}1m∕s. Using a radio-frequency current of a fixed frequency $\ensuremath{\nu}$ coupled directly into the guide wires, atoms exceeding a transverse energy of $h\ensuremath{\nu}$ can be continuously and selectively removed from the atomic beam.
We report the continuous or pulsed loading of a slow and cold atomic beam into a magnetic guide. In order to optimize the transfer into the guide, we have studied two coupling schemes. The first one is based on an auxiliary two-dimensional MOT that confines the atoms transversally before they enter the guide. However, for low atomic velocities, the atoms are strongly heated in the longitudinal direction. This limitation does not occur in the second coupling scheme which relies on magnetic confinement in the transfer zone. For this purpose, we have constructed a miniature magnetic guide located between the atomic source and the long magnetic guide. The latter scheme allows to inject atoms with velocities down to 70 cm/s into the guide.
This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.
The atom laser has long been a holy grail within atom physics and with the creation of an atom laser we hope to bring a similar revolution in to the field of atom optics. With the creation of the Bose-Einstein Condensate (BEC) in 1995 the path to an atom laser was initiated. An atom laser is continues source of BEC. In a Bose condensate all the atoms occupy the same quantum state and can be described by the same wave function and phase. With an atom laser the De Broglie wavelength of atoms can be much smaller than the wavelength of light. Due to the ultimate control over the atoms the atom laser is very interesting for atom optics, lithography, metrology, etching and deposition of atoms on a surface. All previous atom lasers have been created from atoms coupled out from an existing Bose-Einstein Condensate. There are different approaches but common to them all is that the duration of the output of the atom laser is limited by the size of the initial BEC and they all have a low flux. This leaves the quest to build a continuous high flux atom laser. An alternative approach to a continuous BEC beam is to channel a continuous ultra cold atomic beam into a magnetic guide and then cool this beam down to degeneracy. Cooling down a continuous beam of atoms faces three large problems: The collision rate has to be large enough for effective rethermalization, since evaporative cooling in 2D is not as effective as in 3D and a large thermal conductivity due to atoms with a high angular momentum causes heating downstream in the guide. We have built a 4 meter magnetic guide that is placed on a downward slope with a magnetic barrier in the end. In the guide we load packets of ultra cold rubidium atoms with a frequency rate large enough for the packets to merge together to form a continuous atomic beam. The atomic beam is supersonic and when the beam reaches the end barrier it will return and collide with itself. The collisions lowers the velocity of the beam into subsonic velocities and a shock wave is created between the two velocity regions. In order to conserve number of particle, momentum and enthalpy the density of the atomic beam passing through the shock wave must increase. We have build such a shock wave in an atomic beam and observed the density increase due to this. As an extra feature having a subsonic beam on a downward slope adds an extra density increase due to gravitational compression. Loading ultra cold atoms into a 3D trap from the dense subsonic beam overcomes the problem with 2D cooling and thermal conductivity. This was done and evaporative cooling was applied creating an unprecedented large number rubidium BEC.
In this thesis, I explore a variety of experiments within linear, two-wire, magnetic atom guides. Experiments include guiding of Rydberg atoms; transferring between states while keeping the atoms contained within the guide; and designing, constructing, and testing a new experimental apparatus. The ultimate goal of the atom guiding experiments is to develop a continuous atom laser. The guiding of Rydberg atoms is demonstrated. The evolution of the atoms is driven by the combined effects of dipole forces acting on the center-of-mass degree of freedom as well as internal-state transitions. Time delayed microwave and state-selective field ionization are used to investigate the evolution of the internal-state distribution as well as the Rydberg atom motion while traversing the guide. The observed decay time of the guided-atom signal is about five times that of the initial state. A population transfer between Rydberg states contributes to this lengthened lifetime, and also broadens the observed field ionization spectrum. Transfer from one guided ground state to another is studied. In our setup, before the atoms enter the guide, they are pumped into the ∣F=1,mF=−1rangle|F=1, m_F=-1rangle∣F=1,mF​=−1rangle state. Using two repumpers, one tuned to the F=1rightarrowF′=0F=1rightarrow F'=0F=1rightarrowF′=0 transition and the other tuned to the F=1rightarrowF′=2F=1rightarrow F'=2F=1rightarrowF′=2 transition, the atoms are pumped between these guided states. Magnetic reflections within the guide are also studied. Design and construction of a new linear magnetic atom guide is detailed. This guide~betabetabeta has many improvements over the original guide~alphaalphaalpha: a Zeeman slower, magnetic injection, a physical shutter, and surface adsorption evaporative cooling are some of the main changes. Testing of this new system is underway. It is hoped that the improvements to guide~betabetabeta will yield an atom density sufficient to reach degeneracy, thereby forming a continuous BEC at the end of the guide. The BEC, which will be continuously replenished by the atoms within the guide, will be outcoupled to form a continuous atom laser.