Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A three-axis quantum accelerometer for mobile sensing applications

Baptiste Battelier, P. Cheiney, B. Barrett, Simon Templier, Baptiste Gouraud, Olivier Jolly, Philippe Bouyer, Henri Porte, Fabien Napolitano

Published Oct 2, 2020• 3 citations
Publisher

Abstract

We present a mobile 3D accelerometer based on matter-wave interferometry, which is capable of measuring three orthogonal accelerations, each with respect to an independent inertial reference frame defined by the surface of a mirror. On each axis, we construct a hybrid quantum/classical accelerometer by using correlations between the atoms and a mechanical accelerometer attached to the back of each reference mirror. This system combines the large bandwidth and dynamic range of classical devices with the high sensitivity and accuracy of atom interferometers. By correcting each classical accelerometer independently, we are able to track the full acceleration vector with high accuracy.

DOI
10.1117/12.2584181

Related papers

Tracking the vector acceleration with a hybrid quantum accelerometer triad

Simon Templier, P. Cheiney, Quentin d’Armagnac de Castanet +6 more

Robust and accurate acceleration tracking remains a challenge in many fields. For geophysics and economic geology, precise gravity mapping requires onboard sensors combined with accurate positioning and navigation systems. Cold atom–based quantum inertial sensors can potentially provide these high-precision instruments. However, current scalar instruments require precise alignment with vector quantities. Here, we present the first hybrid three-axis accelerometer exploiting the quantum advantage to measure the full acceleration vector by combining three orthogonal atom interferometer measurements with a classical navigation-grade accelerometer triad. Its ultralow bias permits tracking the acceleration vector over long time scales, yielding a 50-fold improvement in stability (6 × 10 −8 g ) over our classical accelerometers. We record the acceleration vector at a high data rate (1 kHz), with absolute magnitude accuracy below 10 μ g , and pointing accuracy of 4 μrad. This paves the way toward future strapdown applications with quantum sensors and highlights their potential as future inertial navigation units.

arXiv:2209.13209•Science Advances•Nov 9, 2022•73 citations

Demonstration of a Robust Hybrid Classical/Quantum Accelerometer

P. Cheiney, B. Barrett, Simon Templier +5 more

We present a hybrid accelerometer that combines the large bandwidth and dynamic range of a mechanical accelerometer with the extreme stability of a quantum accelerometer based on cold atom interferometry. We describe our experimental setup and hybridization algorithm and, to assess the performances of the apparatus, we simulate a mobile environment in the laboratory by adding simultaneously vibration noise, temperature variations and laser intensity fluctuations. Even under these conditions, we are able to track the accelerometer bias to less than 1 μg. In a normal laboratory environment, our hybrid accelerometer then reaches a precision of 10 ng after 11 hours of integration. Finally, we present a novel system that compensates in real-time phase shifts due to vibrations and Doppler shifts that occur when changing the AI orientation. This allows us to operate optimally the atom interferometer in an arbitrary direction, opening the way toward truly mobile operation.

IEEE International Symposium on Inertial Sensors and Systems (INERTIAL)•Apr 1, 2019•11 citations

Optomechanical inertial reference for atom interferometry

A. Rajagopalan, K. Stolzenberg, D. Thomas +5 more

Atom interferometers are among the most sensitive inertial sensors, yet deployment outside the laboratory is limited by vibration noise, conventionally mitigated by external sensors or bulky isolation. Here we demonstrate a hybrid inertial sensor which fuses an optomechanical resonator and an atom interferometer by exploiting the resonator's test mass as the interferometer's reference mirror. This allows for better correlation than with two separate sensors, whose unknown transfer function is replaced by the static response of one mechanical element. The resonator achieves a displacement sensitivity of $8.6\cdot 10^{-15}$ m/$\sqrt{\mathrm{Hz}}$ with suppressed 1/f noise and yields a minimum acceleration sensitivity of $1.1\cdot10^{-6}$ m/s$^2$/$\sqrt{\mathrm{Hz}}$ over a bandwidth extending from sub-Hertz to 2.5 kHz. Under ambient laboratory conditions the integrated system removes vibration-induced phase ambiguity for accelerations up to $50\cdot 10^{-3}$ m/s$^2$ and reaches the interferometer's technical noise limit, which a commercial force-balance accelerometer does not. Because the resonance-tracking readout is largely independent of the mechanical design, the architecture transfers directly to other precision sensing platforms.

quant-pharXiv:2608.28418•Aug 31, 2026

Multi-Axis Inertial Sensing with 2D Matter-Wave Arrays

Knut Stolzenberg, Christian Struckmann, Sebastian Bode +8 more

Atom interferometery is an exquisite measurement technique sensitive to inertial forces. However, it is commonly limited to a single sensitive axis, allowing high-precision multidimensional sensing only through subsequent or postcorrected measurements. We report on a novel method for multi-axis inertial sensing based on the correlation of simultaneous light-pulse atom interferometers in 2D array arrangements of Bose-Einstein condensates (BEC). Deploying a scalable 3×3 BEC array spanning 1.6 mm^{2} created using time-averaged optical potentials, we perform measurements of linear acceleration induced by gravity and simultaneously demonstrate sensitivity to angular velocity and acceleration of a rotating reference mirror, as well as gravity gradients and higher-order derivatives. Our Letter enables simple, high-precision multi-axis inertial sensing compatible with high rotation rates, e.g., for inertial navigation in dynamic environments. We finally envision further applications of our method, e.g., 3D in situ measurements and reconstruction of laser beam intensities and wave fronts.

arXiv:2403.08762•Physical Review Letters•Apr 9, 2025•16 citations

Atom interferometry at arbitrary orientations and rotation rates

Quentin d’Armagnac de Castanet, Cyrille Des Cognets, Romain Arguel +6 more

The exquisite precision of atom interferometers has sparked the interest of a large community for uses ranging from fundamental physics to geodesy and inertial navigation. However, their implementation for onboard applications is still limited, not least because rotation and acceleration are intertwined in a single phase shift, which makes the extraction of a useful signal more challenging. Moreover, the spatial separation of the wave packets due to rotations leads to a loss of signal. We present an atom interferometer operating over a large range of random angles, rotation rates and accelerations. A model of the expected phase shift allows us to untangle the rotation and acceleration signals. We also implement a real-time compensation system using fiber-optic gyroscopes and a rotating reference mirror to maintain the full contrast of the interferometer. We demonstrate a single-shot sensitivity to acceleration of 24 μg for rotation rates reaching 14° s−1. Cold atoms inertial sensors offer great precision and sensitivity, yet their use in mobile applications has been hindered by the effects of rotations on their measurements. Here, authors demonstrate an atom interferometer operating over a wide range of orientations and rotation rates, thanks to hybridisation with accelerometers and gyroscopes.

arXiv:2402.18988•Nature Communications•Jul 30, 2024•35 citations

An atom interferometer for measuring horizontal accelerations

Jimmy Stammers

Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.

•Nov 1, 2018•6 citations
We present a mobile 3D accelerometer based on matter-wave interferometry, which is capable of measuring three orthogonal accelerations, each with respect to an independent inertial reference frame defined by the surface of a mirror. On each axis, we construct a hybrid quantum/classical accelerometer by using correlations between the atoms and a mechanical accelerometer attached to the back of each reference mirror. This system combines the large bandwidth and dynamic range of classical devices with the high sensitivity and accuracy of atom interferometers. By correcting each classical accelerometer independently, we are able to track the full acceleration vector with high accuracy.
Robust and accurate acceleration tracking remains a challenge in many fields. For geophysics and economic geology, precise gravity mapping requires onboard sensors combined with accurate positioning and navigation systems. Cold atom–based quantum inertial sensors can potentially provide these high-precision instruments. However, current scalar instruments require precise alignment with vector quantities. Here, we present the first hybrid three-axis accelerometer exploiting the quantum advantage to measure the full acceleration vector by combining three orthogonal atom interferometer measurements with a classical navigation-grade accelerometer triad. Its ultralow bias permits tracking the acceleration vector over long time scales, yielding a 50-fold improvement in stability (6 × 10 −8 g ) over our classical accelerometers. We record the acceleration vector at a high data rate (1 kHz), with absolute magnitude accuracy below 10 μ g , and pointing accuracy of 4 μrad. This paves the way toward future strapdown applications with quantum sensors and highlights their potential as future inertial navigation units.
We present a hybrid accelerometer that combines the large bandwidth and dynamic range of a mechanical accelerometer with the extreme stability of a quantum accelerometer based on cold atom interferometry. We describe our experimental setup and hybridization algorithm and, to assess the performances of the apparatus, we simulate a mobile environment in the laboratory by adding simultaneously vibration noise, temperature variations and laser intensity fluctuations. Even under these conditions, we are able to track the accelerometer bias to less than 1 μg. In a normal laboratory environment, our hybrid accelerometer then reaches a precision of 10 ng after 11 hours of integration. Finally, we present a novel system that compensates in real-time phase shifts due to vibrations and Doppler shifts that occur when changing the AI orientation. This allows us to operate optimally the atom interferometer in an arbitrary direction, opening the way toward truly mobile operation.
Atom interferometers are among the most sensitive inertial sensors, yet deployment outside the laboratory is limited by vibration noise, conventionally mitigated by external sensors or bulky isolation. Here we demonstrate a hybrid inertial sensor which fuses an optomechanical resonator and an atom interferometer by exploiting the resonator's test mass as the interferometer's reference mirror. This allows for better correlation than with two separate sensors, whose unknown transfer function is replaced by the static response of one mechanical element. The resonator achieves a displacement sensitivity of 8.6⋅10−158.6\cdot 10^{-15}8.6⋅10−15 m/Hz\sqrt{\mathrm{Hz}}Hz​ with suppressed 1/f noise and yields a minimum acceleration sensitivity of 1.1⋅10−61.1\cdot10^{-6}1.1⋅10−6 m/s2^22/Hz\sqrt{\mathrm{Hz}}Hz​ over a bandwidth extending from sub-Hertz to 2.5 kHz. Under ambient laboratory conditions the integrated system removes vibration-induced phase ambiguity for accelerations up to 50⋅10−350\cdot 10^{-3}50⋅10−3 m/s2^22 and reaches the interferometer's technical noise limit, which a commercial force-balance accelerometer does not. Because the resonance-tracking readout is largely independent of the mechanical design, the architecture transfers directly to other precision sensing platforms.
Atom interferometery is an exquisite measurement technique sensitive to inertial forces. However, it is commonly limited to a single sensitive axis, allowing high-precision multidimensional sensing only through subsequent or postcorrected measurements. We report on a novel method for multi-axis inertial sensing based on the correlation of simultaneous light-pulse atom interferometers in 2D array arrangements of Bose-Einstein condensates (BEC). Deploying a scalable 3×3 BEC array spanning 1.6 mm^{2} created using time-averaged optical potentials, we perform measurements of linear acceleration induced by gravity and simultaneously demonstrate sensitivity to angular velocity and acceleration of a rotating reference mirror, as well as gravity gradients and higher-order derivatives. Our Letter enables simple, high-precision multi-axis inertial sensing compatible with high rotation rates, e.g., for inertial navigation in dynamic environments. We finally envision further applications of our method, e.g., 3D in situ measurements and reconstruction of laser beam intensities and wave fronts.
The exquisite precision of atom interferometers has sparked the interest of a large community for uses ranging from fundamental physics to geodesy and inertial navigation. However, their implementation for onboard applications is still limited, not least because rotation and acceleration are intertwined in a single phase shift, which makes the extraction of a useful signal more challenging. Moreover, the spatial separation of the wave packets due to rotations leads to a loss of signal. We present an atom interferometer operating over a large range of random angles, rotation rates and accelerations. A model of the expected phase shift allows us to untangle the rotation and acceleration signals. We also implement a real-time compensation system using fiber-optic gyroscopes and a rotating reference mirror to maintain the full contrast of the interferometer. We demonstrate a single-shot sensitivity to acceleration of 24 μg for rotation rates reaching 14° s−1. Cold atoms inertial sensors offer great precision and sensitivity, yet their use in mobile applications has been hindered by the effects of rotations on their measurements. Here, authors demonstrate an atom interferometer operating over a wide range of orientations and rotation rates, thanks to hybridisation with accelerometers and gyroscopes.
Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.