Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Low Temperature Physics

Parametric Amplification at Ka Band via Nonlinear Dynamics in Superconducting 3D Cavities

D. Banys, M. McCulloch, S. Azzoni, B. Cooper, Andrew J. May, S. J. Melhuish, L. Piccirillo, Jakob Wenninger

Published Mar 18, 2020• 3 citations
Publisher

Abstract

Abstract Modern parametric amplifiers are based on lithographically produced superconducting thin-film planar transmission line structures. These paramps rely on resonant structures with embedded nonlinear elements to stimulate intermodulation with a stronger pump tone that gives rise to signal gain when certain conditions are satisfied. Such paramps have not yet been realised in superconducting 3D waveguide resonators. Possible applications of these devices include detector systems that are based on 3D waveguide such as dark matter detectors and quantum computers. Reported here are the results of an investigation of a 30.64 GHz series circular waveguide resonance machined from bulk niobium showing parametric gain of up to 2 dB in the presence of a stronger pump tone 10 kHz above in frequency. The gain is largest on abrupt jumps of the transmission spectra of the resonance, which may be a result of weak-link formation on the superconducting surfaces.

DOI
10.1007/s10909-020-02439-w

Related papers

Parametric Amplification via Superconducting Contacts in a Ka Band Niobium Pillbox Cavity

V. Gilles, D. Banys, M. McCulloch +2 more

Abstract Superconducting parametric amplifiers are commonly fabricated using planar transmission lines with a nonlinear inductance provided by either Josephson junctions or the intrinsic kinetic inductance of the thin film. However, Banys et al. (J Low Temp Phys, 2020) reported nonlinear behaviour in a niobium pillbox cavity, hypothesising that below $$T_c$$ T c , the pair iris-bulk resonator would act as a superconducting contact surface exploiting a Josephson-like nonlinearity. This work investigates this effect further by applying Keysight Technologies’ Advanced Design System (ADS) to simulate the cavity using an equivalent circuit model that includes a user defined Josephson inductance component. The simulations show that for a resonance centred at $$\nu _0=30.649$$ ν 0 = 30.649 GHz, when two tones (pump and signal) are injected into the cavity, mixing and parametric gain occur. The maximum achievable gain is explored when the resonator is taken to its bifurcation energy. These results are compared to cryogenic measurements where the pump and the signal are provided by a Vector Network Analyzer.

arXiv:2208.11681•Journal of Low Temperature Physics•Dec 2, 2022•0 citations

Parametric amplification with weak-link nonlinearity in superconducting microresonators

Erik A. Tholén, Adem Ergül, Kai Stannigel +2 more

Nonlinear kinetic inductance in a high Q superconducting coplanar waveguide microresonator can cause a bifurcation of the resonance curve. Near the critical pumping power and frequency for bifurcation, large parametric gain is observed for signals in the frequency band near resonance. We show experimental results on signal and intermodulation gain which are well described by a theory of parametric amplification based on a Kerr nonlinearity. Phase-dependent gain or signal squeezing is verified with a homodyne detection scheme.

arXiv:0906.2744•Physica Scripta•Dec 1, 2009•29 citations

Centimeter-wave quantum-noise-limited resonant superconducting parametric amplifier

V. Gilles, Thomas Sweetnam, B. Mohammadian +2 more

Superconducting parametric amplifiers (SPAs) have seen great interest in recent years due to their high gain and quantum limited noise performance. Among these amplifiers, resonant SPAs have been widely developed for experiments where ultralow-noise narrow-band amplification is of interest, such as the search for axion dark matter in particle physics and the detection of spectroscopic lines in astrophysics, while also finding applications in quantum computing. This work presents an amplifier based on a complementary split-ring resonator, patterned on a Nb Ti -coated sapphire substrate embedded within a waveguide, designed to work at a set of four narrow frequency bands throughout the K band (18–27 GHz) using the kinetic inductance of the superconducting film. The S -parameters measured at 400 mK, using a sorption cooler, show the four resonances between 23.3 and 26.3 GHz at 1-GHz spacing, with a maximum transmission on resonance of − 1 dB. Four-wave mixing has been observed with each resonance, and a maximum signal gain of 30 dB has been measured, corresponding to 29 dB of insertion gain. The noise performance of the amplifier has been measured, showing an added noise of 1.2 half-quanta at 400 mK. These results are relevant to high-frequency axion dark matter experiments and help motivate the exploration of higher frequencies in quantum technologies.

arXiv:2604.26543•Physical Review Applied•Apr 28, 2026•0 citations

Superconducting resonator parametric amplifiers with intrinsic separation of pump and signal tones

Songyuan Zhao, S. Withington, Christopher N. Thomas

Abstract Superconducting resonator parametric amplifiers achieve ultra-low-noise amplification through the nonlinear kinetic inductance of thin-film superconductors. One of the main challenges to the operation of these devices is the separation of the strong pump tone from the signal tone after amplification has been achieved. In this paper, we propose and experimentally demonstrate a pump separation method based on operating a half-wave superconducting resonator amplifier behind a cryogenic circulator. Our pump separation scheme does not involve post-amplification interference, and thereby avoids the delicate phase matching of two different pump paths. We demonstrate the scheme using two-port half-wave resonator amplifiers based on superconducting NbN thin-films. We present measurements of gain profiles and degrees of pump separation for amplifiers having different coupling quality factors. On an amplifier having a coupling quality factor of ∼2000, we measured a peak signal gain of 15 dB whilst achieving pump separation of 12 dB . The amplifier was stable for continuous measurements, and the gain drift was measured to be 0.15 dB over an hour. The same amplifier was operated at 3.2 K and achieved a peak signal gain of 11 dB whilst having a pump separation factor of 10.5 dB . The pump separation scheme, and these promising results, will advance the development of superconducting resonator amplifiers as an important technology in quantum sensing.

arXiv:2406.02455•Journal of Physics D Applied Physics•Oct 16, 2024•10 citations

Nonlinear characteristics of Ti, Nb, and NbN superconducting resonators for parametric amplifiers

Songyuan Zhao, S. Withington, Christopher N. Thomas

Abstract Superconducting resonators and parametric amplifiers are important components in scientific systems such as kinetic inductance detector arrays, frequency-domain multiplexers for other superconducting bolometers, spin-ensemble based memories, and circuit quantum electrodynamics demonstrators. In this paper, we report microwave measurements of superconducting Ti, Nb, and NbN resonators and their use as parametric amplifiers. These half-wave resonators were fabricated under near identical sputtering and lithographic conditions to ensure a like-for-like comparison of material properties. We report a wide range of properties and behaviours in terms of transition temperatures, resistivities, rate-limiting nonlinear response times, nonlinear dissipation, signs of the nonlinear inductances and their dependences on temperature and resonance harmonic. We have successfully operated Nb and NbN resonators as high gain parametric amplifiers, achieving greater than 20 dB of power amplification. We have shown that for a half-wave resonator, amplification can be realised not only in the fundamental resonance but also in the higher harmonic resonances. Further, for materials with high transition temperatures, e.g. Nb and NbN, amplification can be achieved at ∼ 4 K, i.e. a temperature maintained by a pulse tube cooler. Finally, in materials systems that have very fast response times, e.g. NbN, we have found that a cross-harmonic type of amplification can be achieved by placing pump tone in a different resonant mode as the signal and the idler. This wide range of observations will have important implications on the design and application of superconducting parametric amplifiers.

arXiv:2306.00685•Superconductor Science and Technology•Aug 16, 2023•16 citations

Superconducting Parametric Amplifiers: Resonator Design and Role in Qubit Readout

Babak Mohammadian

Superconducting parametric amplifiers (SPAs) are critical components for ultralow-noise qubit readout in quantum computing, addressing the critical challenge of amplifying weak quantum signals without introducing noise that degrades coherence and computational fidelity. Unlike classical amplifiers, SPAs can achieve or closely approach quantum-limited performance, specifically the Standard Quantum Limit (SQL) of half a photon of added noise for phase-preserving amplification. The core principle of SPAs relies on parametric amplification, where energy is transferred from a strong pump tone to a weak input signal through non-dissipative nonlinear mixing processes. This is enabled by intrinsic nonlinearities in superconducting materials, primarily kinetic inductance in thin films (e.g., NbTiN, Al) and, more significantly, the Josephson effect in Josephson junctions. These nonlinear elements facilitate frequency mixing (three-wave or four-wave mixing) and can operate in phase-preserving or phase-sensitive amplification modes, with the latter allowing for noise squeezing below the SQL. This chapter emphasizes the significant role of resonator design in determining critical SPA performance metrics such as gain, bandwidth, and noise characteristics. It details both lumped-element (LC) and distributed-element (coplanar waveguide, CPW) resonators, discussing their unique properties, suitability for different frequency ranges, and the importance of achieving high-quality factors (Q) for efficient energy storage and minimal loss. A practical design and simulation of a meandered quarterwavelength CPW resonator coupled to a feed line is presented, illustrating how precise control over geometric parameters optimizes resonant frequency, coupling strength, and quality factor for high-fidelity qubit state discrimination.

quant-pharXiv:2511.20097•IntechOpen eBooks•Nov 26, 2025•1 citation
Abstract Modern parametric amplifiers are based on lithographically produced superconducting thin-film planar transmission line structures. These paramps rely on resonant structures with embedded nonlinear elements to stimulate intermodulation with a stronger pump tone that gives rise to signal gain when certain conditions are satisfied. Such paramps have not yet been realised in superconducting 3D waveguide resonators. Possible applications of these devices include detector systems that are based on 3D waveguide such as dark matter detectors and quantum computers. Reported here are the results of an investigation of a 30.64 GHz series circular waveguide resonance machined from bulk niobium showing parametric gain of up to 2 dB in the presence of a stronger pump tone 10 kHz above in frequency. The gain is largest on abrupt jumps of the transmission spectra of the resonance, which may be a result of weak-link formation on the superconducting surfaces.
Abstract Superconducting parametric amplifiers are commonly fabricated using planar transmission lines with a nonlinear inductance provided by either Josephson junctions or the intrinsic kinetic inductance of the thin film. However, Banys et al. (J Low Temp Phys, 2020) reported nonlinear behaviour in a niobium pillbox cavity, hypothesising that below TcT_cTc​ T c , the pair iris-bulk resonator would act as a superconducting contact surface exploiting a Josephson-like nonlinearity. This work investigates this effect further by applying Keysight Technologies’ Advanced Design System (ADS) to simulate the cavity using an equivalent circuit model that includes a user defined Josephson inductance component. The simulations show that for a resonance centred at ν0=30.649\nu _0=30.649ν0​=30.649 ν 0 = 30.649 GHz, when two tones (pump and signal) are injected into the cavity, mixing and parametric gain occur. The maximum achievable gain is explored when the resonator is taken to its bifurcation energy. These results are compared to cryogenic measurements where the pump and the signal are provided by a Vector Network Analyzer.
Nonlinear kinetic inductance in a high Q superconducting coplanar waveguide microresonator can cause a bifurcation of the resonance curve. Near the critical pumping power and frequency for bifurcation, large parametric gain is observed for signals in the frequency band near resonance. We show experimental results on signal and intermodulation gain which are well described by a theory of parametric amplification based on a Kerr nonlinearity. Phase-dependent gain or signal squeezing is verified with a homodyne detection scheme.
Superconducting parametric amplifiers (SPAs) have seen great interest in recent years due to their high gain and quantum limited noise performance. Among these amplifiers, resonant SPAs have been widely developed for experiments where ultralow-noise narrow-band amplification is of interest, such as the search for axion dark matter in particle physics and the detection of spectroscopic lines in astrophysics, while also finding applications in quantum computing. This work presents an amplifier based on a complementary split-ring resonator, patterned on a Nb Ti -coated sapphire substrate embedded within a waveguide, designed to work at a set of four narrow frequency bands throughout the K band (18–27 GHz) using the kinetic inductance of the superconducting film. The S -parameters measured at 400 mK, using a sorption cooler, show the four resonances between 23.3 and 26.3 GHz at 1-GHz spacing, with a maximum transmission on resonance of − 1 dB. Four-wave mixing has been observed with each resonance, and a maximum signal gain of 30 dB has been measured, corresponding to 29 dB of insertion gain. The noise performance of the amplifier has been measured, showing an added noise of 1.2 half-quanta at 400 mK. These results are relevant to high-frequency axion dark matter experiments and help motivate the exploration of higher frequencies in quantum technologies.
Abstract Superconducting resonator parametric amplifiers achieve ultra-low-noise amplification through the nonlinear kinetic inductance of thin-film superconductors. One of the main challenges to the operation of these devices is the separation of the strong pump tone from the signal tone after amplification has been achieved. In this paper, we propose and experimentally demonstrate a pump separation method based on operating a half-wave superconducting resonator amplifier behind a cryogenic circulator. Our pump separation scheme does not involve post-amplification interference, and thereby avoids the delicate phase matching of two different pump paths. We demonstrate the scheme using two-port half-wave resonator amplifiers based on superconducting NbN thin-films. We present measurements of gain profiles and degrees of pump separation for amplifiers having different coupling quality factors. On an amplifier having a coupling quality factor of ∼2000, we measured a peak signal gain of 15 dB whilst achieving pump separation of 12 dB . The amplifier was stable for continuous measurements, and the gain drift was measured to be 0.15 dB over an hour. The same amplifier was operated at 3.2 K and achieved a peak signal gain of 11 dB whilst having a pump separation factor of 10.5 dB . The pump separation scheme, and these promising results, will advance the development of superconducting resonator amplifiers as an important technology in quantum sensing.
Abstract Superconducting resonators and parametric amplifiers are important components in scientific systems such as kinetic inductance detector arrays, frequency-domain multiplexers for other superconducting bolometers, spin-ensemble based memories, and circuit quantum electrodynamics demonstrators. In this paper, we report microwave measurements of superconducting Ti, Nb, and NbN resonators and their use as parametric amplifiers. These half-wave resonators were fabricated under near identical sputtering and lithographic conditions to ensure a like-for-like comparison of material properties. We report a wide range of properties and behaviours in terms of transition temperatures, resistivities, rate-limiting nonlinear response times, nonlinear dissipation, signs of the nonlinear inductances and their dependences on temperature and resonance harmonic. We have successfully operated Nb and NbN resonators as high gain parametric amplifiers, achieving greater than 20 dB of power amplification. We have shown that for a half-wave resonator, amplification can be realised not only in the fundamental resonance but also in the higher harmonic resonances. Further, for materials with high transition temperatures, e.g. Nb and NbN, amplification can be achieved at ∼ 4 K, i.e. a temperature maintained by a pulse tube cooler. Finally, in materials systems that have very fast response times, e.g. NbN, we have found that a cross-harmonic type of amplification can be achieved by placing pump tone in a different resonant mode as the signal and the idler. This wide range of observations will have important implications on the design and application of superconducting parametric amplifiers.
Superconducting parametric amplifiers (SPAs) are critical components for ultralow-noise qubit readout in quantum computing, addressing the critical challenge of amplifying weak quantum signals without introducing noise that degrades coherence and computational fidelity. Unlike classical amplifiers, SPAs can achieve or closely approach quantum-limited performance, specifically the Standard Quantum Limit (SQL) of half a photon of added noise for phase-preserving amplification. The core principle of SPAs relies on parametric amplification, where energy is transferred from a strong pump tone to a weak input signal through non-dissipative nonlinear mixing processes. This is enabled by intrinsic nonlinearities in superconducting materials, primarily kinetic inductance in thin films (e.g., NbTiN, Al) and, more significantly, the Josephson effect in Josephson junctions. These nonlinear elements facilitate frequency mixing (three-wave or four-wave mixing) and can operate in phase-preserving or phase-sensitive amplification modes, with the latter allowing for noise squeezing below the SQL. This chapter emphasizes the significant role of resonator design in determining critical SPA performance metrics such as gain, bandwidth, and noise characteristics. It details both lumped-element (LC) and distributed-element (coplanar waveguide, CPW) resonators, discussing their unique properties, suitability for different frequency ranges, and the importance of achieving high-quality factors (Q) for efficient energy storage and minimal loss. A practical design and simulation of a meandered quarterwavelength CPW resonator coupled to a feed line is presented, illustrating how precise control over geometric parameters optimizes resonant frequency, coupling strength, and quality factor for high-fidelity qubit state discrimination.