Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2604.26543 · Physical Review Applied

Centimeter-wave quantum-noise-limited resonant superconducting parametric amplifier

V. Gilles, Thomas Sweetnam, B. Mohammadian, M. McCulloch, L. Piccirillo

Published Apr 28, 2026• 0 citations
arXivHTMLPDF

Abstract

Superconducting parametric amplifiers (SPAs) have seen great interest in recent years due to their high gain and quantum limited noise performance. Among these amplifiers, resonant SPAs have been widely developed for experiments where ultralow-noise narrow-band amplification is of interest, such as the search for axion dark matter in particle physics and the detection of spectroscopic lines in astrophysics, while also finding applications in quantum computing. This work presents an amplifier based on a complementary split-ring resonator, patterned on a Nb Ti -coated sapphire substrate embedded within a waveguide, designed to work at a set of four narrow frequency bands throughout the K band (18–27 GHz) using the kinetic inductance of the superconducting film. The S -parameters measured at 400 mK, using a sorption cooler, show the four resonances between 23.3 and 26.3 GHz at 1-GHz spacing, with a maximum transmission on resonance of − 1 dB. Four-wave mixing has been observed with each resonance, and a maximum signal gain of 30 dB has been measured, corresponding to 29 dB of insertion gain. The noise performance of the amplifier has been measured, showing an added noise of 1.2 half-quanta at 400 mK. These results are relevant to high-frequency axion dark matter experiments and help motivate the exploration of higher frequencies in quantum technologies.

DOI
10.1103/zhzr-bxy1

Related papers

Superconducting Parametric Amplifiers: Resonator Design and Role in Qubit Readout

Babak Mohammadian

Superconducting parametric amplifiers (SPAs) are critical components for ultralow-noise qubit readout in quantum computing, addressing the critical challenge of amplifying weak quantum signals without introducing noise that degrades coherence and computational fidelity. Unlike classical amplifiers, SPAs can achieve or closely approach quantum-limited performance, specifically the Standard Quantum Limit (SQL) of half a photon of added noise for phase-preserving amplification. The core principle of SPAs relies on parametric amplification, where energy is transferred from a strong pump tone to a weak input signal through non-dissipative nonlinear mixing processes. This is enabled by intrinsic nonlinearities in superconducting materials, primarily kinetic inductance in thin films (e.g., NbTiN, Al) and, more significantly, the Josephson effect in Josephson junctions. These nonlinear elements facilitate frequency mixing (three-wave or four-wave mixing) and can operate in phase-preserving or phase-sensitive amplification modes, with the latter allowing for noise squeezing below the SQL. This chapter emphasizes the significant role of resonator design in determining critical SPA performance metrics such as gain, bandwidth, and noise characteristics. It details both lumped-element (LC) and distributed-element (coplanar waveguide, CPW) resonators, discussing their unique properties, suitability for different frequency ranges, and the importance of achieving high-quality factors (Q) for efficient energy storage and minimal loss. A practical design and simulation of a meandered quarterwavelength CPW resonator coupled to a feed line is presented, illustrating how precise control over geometric parameters optimizes resonant frequency, coupling strength, and quality factor for high-fidelity qubit state discrimination.

quant-pharXiv:2511.20097•IntechOpen eBooks•Nov 26, 2025•1 citation

A K-band Kinetic Inductance Parametric Amplifier Near the Quantum Limit

Chaofan Wang, Shihan Liu, Yufeng Wu +4 more

Advancing superconducting quantum devices to higher operating frequencies broadens their functionality and enables operation at elevated temperatures, but it also requires near-quantum-limited amplifiers beyond the few-gigahertz regime. Here we present a junction-free, kinetic-inductance parametric amplifier based on thin-film niobium nitride (NbN) operating at 23 GHz in the microwave K-band, achieving a gain up to 40 dB, a 100 MHz gain-bandwidth product, a 1 dB saturation input power of -85 dBm with 23 dB gain, and added noise no greater than 1.4 quanta for phase-preserving amplification. Leveraging the large superconducting gap of NbN, this architecture can be extended to even higher frequencies, supporting applications such as high-fidelity readout of millimeter-wave superconducting qubits and axion searches over an expanded mass window.

quant-pharXiv:2606.08406•Jun 9, 2026•1 citation

A K-band kinetic-inductance parametric amplifier near the quantum limit

C.R. Wang, Shihan Liu, Yufeng Wu +4 more

Advancing superconducting quantum devices to higher operating frequencies broadens their functionality and enables operation at elevated temperatures, but it also requires near-quantum-limited amplifiers beyond the few-gigahertz regime. Here, we present a junction-free, kinetic-inductance parametric amplifier based on thin-film niobium nitride (NbN) operating at 23 GHz in the microwave K-band, achieving a gain up to 40 dB, a 100 MHz gain–bandwidth product, a 1 dB saturation input power of −85 dBm with 23 dB gain, and added noise not greater than 1.4 quanta for phase-preserving amplification. Leveraging the large superconducting gap of NbN, this architecture can be extended to even higher frequencies, supporting applications such as high-fidelity readout of millimeter-wave superconducting qubits and axion searches over an expanded mass window.

Applied Physics Letters•Jun 22, 2026•0 citations

Development of Quantum Limited Superconducting Amplifiers for Advanced Detection

S. Pagano, C. Barone, M. Borghesi +36 more

Ultralow-noise microwave amplification and detection play a central role in different applications, going from fundamental physics experiments to the deployment of quantum technologies. In many applications the necessity of reading multiple detectors, or cavities or qubits, calls for large bandwidth amplifiers with the lowest possible noise. Current technologies are based on High Electron Mobility Transistors and Josephson Parametric Amplifiers. Both have limitations, the former in terms of the minimum noise, the latter in terms of bandwidth. Superconducting Traveling Wave Parametric Amplifiers (TWPAs) have the potential of offering quantum limited noise and large bandwidth. These amplifiers are based on the parametric amplification of microwaves traveling along a transmission line with embedded nonlinear elements. We are developing superconducting TWPAs based both on Josephson junction arrays (Traveling Wave Josephson Parametric Amplifiers) and on nonlinear kinetic inductance (Dispersion Engineered Traveling Wave Kinetic Inductance Amplifiers). Our goal is to achieve large bandwidth (in the 5 to 10 GHz range), large gain (more than 20 dB), large saturation power (more than −50 dBm), and near quantum limited noise (noise temperature less than 600 mK). Current achievements in the design and development of the high performance TWPAs are here reported and discussed, together with current limitations and possible future developments.

IEEE Transactions on Applied Superconductivity•Jan 25, 2022•18 citations

A 4–8 GHz kinetic inductance traveling-wave parametric amplifier using four-wave mixing with near quantum-limited noise performance

Farzad Faramarzi, Ryan Stephenson, Sasha Sypkens +3 more

Kinetic inductance traveling-wave parametric amplifiers (KI-TWPAs) have a wide instantaneous bandwidth with a near quantum-limited noise performance and a relatively high dynamic range. Because of this, they are suitable readout devices for cryogenic detectors and superconducting qubits and have a variety of applications in quantum sensing. This work discusses the design, fabrication, and performance of a KI-TWPA based on four-wave mixing in a NbTiN microstrip transmission line. This device amplifies a signal band from 4 to 8 GHz without contamination from image tones, which are produced in a separate higher frequency band. The 4–8 GHz band is commonly used to read out cryogenic detectors, such as microwave kinetic inductance detectors and Josephson junction-based qubits. We report a measured maximum gain of over 20 dB using four-wave mixing with a 1 dB gain compression point of −58 dBm at 15 dB of gain over that band. The bandwidth and peak gain are tunable by adjusting the pump-tone frequency and power. Using a Y-factor method, we measure an amplifier-added noise of 0.5 ≤ Nadded ≤ 1.5 photons from 4.5 to 8 GHz.

arXiv:2402.11751•APL Quantum•Jul 11, 2024•32 citations

Wideband superconducting parametric amplifiers based on kinetic inductance (Conference Presentation)

Peter K. Day, Byeong Ho Eom, Henry George LeDuc

Traveling-wave parametric amplifiers based on superconducting NbTiN films are being developed that provide gain over nearly an octave of bandwidth at microwave frequencies. The amplifiers are non-linear transmission lines, where the nonlinearity comes from the current dependence of the kinetic inductance. Amplification results from three and four-wave mixing processes, and phase matching over a wide frequency range is achieved by engineering the dispersion characteristics of the transmission line. Recent noise measurements over a wide frequency band demonstrate that the added noise of these amplifiers is close to one half photon, consistent with the quantum limit for a phase preserving amplifier. We will discuss applications of this class of amplifier to astronomical instruments.

Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI•Jul 10, 2018•1 citation
Superconducting parametric amplifiers (SPAs) have seen great interest in recent years due to their high gain and quantum limited noise performance. Among these amplifiers, resonant SPAs have been widely developed for experiments where ultralow-noise narrow-band amplification is of interest, such as the search for axion dark matter in particle physics and the detection of spectroscopic lines in astrophysics, while also finding applications in quantum computing. This work presents an amplifier based on a complementary split-ring resonator, patterned on a Nb Ti -coated sapphire substrate embedded within a waveguide, designed to work at a set of four narrow frequency bands throughout the K band (18–27 GHz) using the kinetic inductance of the superconducting film. The S -parameters measured at 400 mK, using a sorption cooler, show the four resonances between 23.3 and 26.3 GHz at 1-GHz spacing, with a maximum transmission on resonance of − 1 dB. Four-wave mixing has been observed with each resonance, and a maximum signal gain of 30 dB has been measured, corresponding to 29 dB of insertion gain. The noise performance of the amplifier has been measured, showing an added noise of 1.2 half-quanta at 400 mK. These results are relevant to high-frequency axion dark matter experiments and help motivate the exploration of higher frequencies in quantum technologies.
Superconducting parametric amplifiers (SPAs) are critical components for ultralow-noise qubit readout in quantum computing, addressing the critical challenge of amplifying weak quantum signals without introducing noise that degrades coherence and computational fidelity. Unlike classical amplifiers, SPAs can achieve or closely approach quantum-limited performance, specifically the Standard Quantum Limit (SQL) of half a photon of added noise for phase-preserving amplification. The core principle of SPAs relies on parametric amplification, where energy is transferred from a strong pump tone to a weak input signal through non-dissipative nonlinear mixing processes. This is enabled by intrinsic nonlinearities in superconducting materials, primarily kinetic inductance in thin films (e.g., NbTiN, Al) and, more significantly, the Josephson effect in Josephson junctions. These nonlinear elements facilitate frequency mixing (three-wave or four-wave mixing) and can operate in phase-preserving or phase-sensitive amplification modes, with the latter allowing for noise squeezing below the SQL. This chapter emphasizes the significant role of resonator design in determining critical SPA performance metrics such as gain, bandwidth, and noise characteristics. It details both lumped-element (LC) and distributed-element (coplanar waveguide, CPW) resonators, discussing their unique properties, suitability for different frequency ranges, and the importance of achieving high-quality factors (Q) for efficient energy storage and minimal loss. A practical design and simulation of a meandered quarterwavelength CPW resonator coupled to a feed line is presented, illustrating how precise control over geometric parameters optimizes resonant frequency, coupling strength, and quality factor for high-fidelity qubit state discrimination.
Advancing superconducting quantum devices to higher operating frequencies broadens their functionality and enables operation at elevated temperatures, but it also requires near-quantum-limited amplifiers beyond the few-gigahertz regime. Here we present a junction-free, kinetic-inductance parametric amplifier based on thin-film niobium nitride (NbN) operating at 23 GHz in the microwave K-band, achieving a gain up to 40 dB, a 100 MHz gain-bandwidth product, a 1 dB saturation input power of -85 dBm with 23 dB gain, and added noise no greater than 1.4 quanta for phase-preserving amplification. Leveraging the large superconducting gap of NbN, this architecture can be extended to even higher frequencies, supporting applications such as high-fidelity readout of millimeter-wave superconducting qubits and axion searches over an expanded mass window.
Advancing superconducting quantum devices to higher operating frequencies broadens their functionality and enables operation at elevated temperatures, but it also requires near-quantum-limited amplifiers beyond the few-gigahertz regime. Here, we present a junction-free, kinetic-inductance parametric amplifier based on thin-film niobium nitride (NbN) operating at 23 GHz in the microwave K-band, achieving a gain up to 40 dB, a 100 MHz gain–bandwidth product, a 1 dB saturation input power of −85 dBm with 23 dB gain, and added noise not greater than 1.4 quanta for phase-preserving amplification. Leveraging the large superconducting gap of NbN, this architecture can be extended to even higher frequencies, supporting applications such as high-fidelity readout of millimeter-wave superconducting qubits and axion searches over an expanded mass window.
Ultralow-noise microwave amplification and detection play a central role in different applications, going from fundamental physics experiments to the deployment of quantum technologies. In many applications the necessity of reading multiple detectors, or cavities or qubits, calls for large bandwidth amplifiers with the lowest possible noise. Current technologies are based on High Electron Mobility Transistors and Josephson Parametric Amplifiers. Both have limitations, the former in terms of the minimum noise, the latter in terms of bandwidth. Superconducting Traveling Wave Parametric Amplifiers (TWPAs) have the potential of offering quantum limited noise and large bandwidth. These amplifiers are based on the parametric amplification of microwaves traveling along a transmission line with embedded nonlinear elements. We are developing superconducting TWPAs based both on Josephson junction arrays (Traveling Wave Josephson Parametric Amplifiers) and on nonlinear kinetic inductance (Dispersion Engineered Traveling Wave Kinetic Inductance Amplifiers). Our goal is to achieve large bandwidth (in the 5 to 10 GHz range), large gain (more than 20 dB), large saturation power (more than −50 dBm), and near quantum limited noise (noise temperature less than 600 mK). Current achievements in the design and development of the high performance TWPAs are here reported and discussed, together with current limitations and possible future developments.
Kinetic inductance traveling-wave parametric amplifiers (KI-TWPAs) have a wide instantaneous bandwidth with a near quantum-limited noise performance and a relatively high dynamic range. Because of this, they are suitable readout devices for cryogenic detectors and superconducting qubits and have a variety of applications in quantum sensing. This work discusses the design, fabrication, and performance of a KI-TWPA based on four-wave mixing in a NbTiN microstrip transmission line. This device amplifies a signal band from 4 to 8 GHz without contamination from image tones, which are produced in a separate higher frequency band. The 4–8 GHz band is commonly used to read out cryogenic detectors, such as microwave kinetic inductance detectors and Josephson junction-based qubits. We report a measured maximum gain of over 20 dB using four-wave mixing with a 1 dB gain compression point of −58 dBm at 15 dB of gain over that band. The bandwidth and peak gain are tunable by adjusting the pump-tone frequency and power. Using a Y-factor method, we measure an amplifier-added noise of 0.5 ≤ Nadded ≤ 1.5 photons from 4.5 to 8 GHz.
Traveling-wave parametric amplifiers based on superconducting NbTiN films are being developed that provide gain over nearly an octave of bandwidth at microwave frequencies. The amplifiers are non-linear transmission lines, where the nonlinearity comes from the current dependence of the kinetic inductance. Amplification results from three and four-wave mixing processes, and phase matching over a wide frequency range is achieved by engineering the dispersion characteristics of the transmission line. Recent noise measurements over a wide frequency band demonstrate that the added noise of these amplifiers is close to one half photon, consistent with the quantum limit for a phase preserving amplifier. We will discuss applications of this class of amplifier to astronomical instruments.