Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2511.20097 · IntechOpen eBooks

Superconducting Parametric Amplifiers: Resonator Design and Role in Qubit Readout

Babak Mohammadian

quant-phSubmitted Nov 25, 2025• Announced Nov 26, 2025• 1 citation• Revised Dec 3, 2025 (v2)
v1 · Nov 25, 2025v2 · Dec 3, 2025
arXivHTMLPDF

Abstract

Superconducting parametric amplifiers (SPAs) are critical components for ultralow-noise qubit readout in quantum computing, addressing the critical challenge of amplifying weak quantum signals without introducing noise that degrades coherence and computational fidelity. Unlike classical amplifiers, SPAs can achieve or closely approach quantum-limited performance, specifically the Standard Quantum Limit (SQL) of half a photon of added noise for phase-preserving amplification. The core principle of SPAs relies on parametric amplification, where energy is transferred from a strong pump tone to a weak input signal through non-dissipative nonlinear mixing processes. This is enabled by intrinsic nonlinearities in superconducting materials, primarily kinetic inductance in thin films (e.g., NbTiN, Al) and, more significantly, the Josephson effect in Josephson junctions. These nonlinear elements facilitate frequency mixing (three-wave or four-wave mixing) and can operate in phase-preserving or phase-sensitive amplification modes, with the latter allowing for noise squeezing below the SQL. This chapter emphasizes the significant role of resonator design in determining critical SPA performance metrics such as gain, bandwidth, and noise characteristics. It details both lumped-element (LC) and distributed-element (coplanar waveguide, CPW) resonators, discussing their unique properties, suitability for different frequency ranges, and the importance of achieving high-quality factors (Q) for efficient energy storage and minimal loss. A practical design and simulation of a meandered quarterwavelength CPW resonator coupled to a feed line is presented, illustrating how precise control over geometric parameters optimizes resonant frequency, coupling strength, and quality factor for high-fidelity qubit state discrimination.

Journal reference
Recent Developments in Applications of Quantum Physics, edited by E. Sakk, IntechOpen, London, 2025
DOI
10.5772/intechopen.1013108

Related papers

Centimeter-wave quantum-noise-limited resonant superconducting parametric amplifier

V. Gilles, Thomas Sweetnam, B. Mohammadian +2 more

Superconducting parametric amplifiers (SPAs) have seen great interest in recent years due to their high gain and quantum limited noise performance. Among these amplifiers, resonant SPAs have been widely developed for experiments where ultralow-noise narrow-band amplification is of interest, such as the search for axion dark matter in particle physics and the detection of spectroscopic lines in astrophysics, while also finding applications in quantum computing. This work presents an amplifier based on a complementary split-ring resonator, patterned on a Nb Ti -coated sapphire substrate embedded within a waveguide, designed to work at a set of four narrow frequency bands throughout the K band (18–27 GHz) using the kinetic inductance of the superconducting film. The S -parameters measured at 400 mK, using a sorption cooler, show the four resonances between 23.3 and 26.3 GHz at 1-GHz spacing, with a maximum transmission on resonance of − 1 dB. Four-wave mixing has been observed with each resonance, and a maximum signal gain of 30 dB has been measured, corresponding to 29 dB of insertion gain. The noise performance of the amplifier has been measured, showing an added noise of 1.2 half-quanta at 400 mK. These results are relevant to high-frequency axion dark matter experiments and help motivate the exploration of higher frequencies in quantum technologies.

arXiv:2604.26543•Physical Review Applied•Apr 28, 2026•0 citations

A near–quantum-limited Josephson traveling-wave parametric amplifier

Chris Macklin, Kevin P. O’Brien, David J. Hover +5 more

Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics.

Science•Sep 3, 2015•875 citations

Superconducting resonator parametric amplifiers with intrinsic separation of pump and signal tones

Songyuan Zhao, S. Withington, Christopher N. Thomas

Abstract Superconducting resonator parametric amplifiers achieve ultra-low-noise amplification through the nonlinear kinetic inductance of thin-film superconductors. One of the main challenges to the operation of these devices is the separation of the strong pump tone from the signal tone after amplification has been achieved. In this paper, we propose and experimentally demonstrate a pump separation method based on operating a half-wave superconducting resonator amplifier behind a cryogenic circulator. Our pump separation scheme does not involve post-amplification interference, and thereby avoids the delicate phase matching of two different pump paths. We demonstrate the scheme using two-port half-wave resonator amplifiers based on superconducting NbN thin-films. We present measurements of gain profiles and degrees of pump separation for amplifiers having different coupling quality factors. On an amplifier having a coupling quality factor of ∼2000, we measured a peak signal gain of 15 dB whilst achieving pump separation of 12 dB . The amplifier was stable for continuous measurements, and the gain drift was measured to be 0.15 dB over an hour. The same amplifier was operated at 3.2 K and achieved a peak signal gain of 11 dB whilst having a pump separation factor of 10.5 dB . The pump separation scheme, and these promising results, will advance the development of superconducting resonator amplifiers as an important technology in quantum sensing.

arXiv:2406.02455•Journal of Physics D Applied Physics•Oct 16, 2024•10 citations

Al-InAs Superconductor-Semiconductor Josephson Junction Parametric Amplifier

Z. Hao, T. Shaw, Mehdi Hatefipour +5 more

Near-quantum-limited amplifiers are essential building blocks for high-fidelity readout of superconducting qubits. Josephson parametric amplifiers (JPAs) have been developed to achieve this ultra-low-noise performance [1] in the last two decades by exploiting the quartic term in the nonlinear energy-phase relation of Al-AlO X superconductor-insulator-superconductor Josephson Junctions (SIS JJs). An ongoing research focus is to enhance JPAs’ compression power for processing readout signals in large-scale quantum processors. One approach is to optimize circuit designs to minimize parasitic higher-order nonlinear terms while preserving the quartic nonlinearity for the amplification process. An alternative approach is to make use of new types of JJ devices with small quartic nonlinearity such that parasitic nonlinearities are inherently even lower. Here, we demonstrate that superconductor-semiconductor-superconductor (SSmS) JJs, realized with Al-InAs heterostructures are a promising device to realize quantum-limited amplifiers for superconducting quantum computing. Al-InAs JJs have been used to realize qubits [2] , voltage-tunable resonators [3] , and parametric amplifiers [4] by exploiting critical current tunability via gate voltage ( Fig. 1(a–b) ). In this work, for the first time, we experimentally studied the nonlinear energy-phase relation of Al-InAs JJs and revealed their inherently low quartic nonlinearity. Next, we demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves greater than 20 dB of gain, 6 MHz of bandwidth and −119 dBm of compression power.

Conference digest•Jun 24, 2024•0 citations

Development of Quantum Limited Superconducting Amplifiers for Advanced Detection

S. Pagano, C. Barone, M. Borghesi +36 more

Ultralow-noise microwave amplification and detection play a central role in different applications, going from fundamental physics experiments to the deployment of quantum technologies. In many applications the necessity of reading multiple detectors, or cavities or qubits, calls for large bandwidth amplifiers with the lowest possible noise. Current technologies are based on High Electron Mobility Transistors and Josephson Parametric Amplifiers. Both have limitations, the former in terms of the minimum noise, the latter in terms of bandwidth. Superconducting Traveling Wave Parametric Amplifiers (TWPAs) have the potential of offering quantum limited noise and large bandwidth. These amplifiers are based on the parametric amplification of microwaves traveling along a transmission line with embedded nonlinear elements. We are developing superconducting TWPAs based both on Josephson junction arrays (Traveling Wave Josephson Parametric Amplifiers) and on nonlinear kinetic inductance (Dispersion Engineered Traveling Wave Kinetic Inductance Amplifiers). Our goal is to achieve large bandwidth (in the 5 to 10 GHz range), large gain (more than 20 dB), large saturation power (more than −50 dBm), and near quantum limited noise (noise temperature less than 600 mK). Current achievements in the design and development of the high performance TWPAs are here reported and discussed, together with current limitations and possible future developments.

IEEE Transactions on Applied Superconductivity•Jan 25, 2022•18 citations

Parametric amplification in a Josephson junction array Fabry-Pérot cavity

Javier Navarro Montilla, Nikita S. Klimovich, A. Barbier +2 more

Abstract Superconducting Parametric Amplifiers (SPAs) with near-quantum-limited added noise are crucial for weak signal detection applications such as astronomical receivers, quantum computation, and fundamental physics experiments. Commercially available SPAs include Josephson Parametric Amplifiers (JPAs), which offer high gain but narrow bandwidth performance; and Josephson-junction Travelling Wave Parametric Amplifiers (JTWPAs), which provide broader bandwidth at the cost of a complicated fabrication procedure, lower fabrication yield, and larger footprint area. In this paper, we investigate the parametric amplification of microwave signals in a Josephson array embedded in a low-Q Fabry-Pérot cavity. We fabricated a 500-junction array device and measured >15 dB phase-preserving gain over a ∼350 MHz bandwidth, while offering almost two orders of magnitude improvement in compression point (P 1dB = −106.2 dBm) compared to standard JPAs. Furthermore, using a novel measurement technique, we configured our device to operate in the phase-sensitive mode, measuring a phase-sensitive extinction ratio (PSER) of 42.3 ± 2.81 dB, in line with state-of-the-art values for JPAs. These promising performances, combined with the ease of fabrication and improved yield compared with JTWPAs, underscore the potential of these devices for applications in advanced detection schemes.

Physica Scripta•Sep 1, 2025•1 citation
Superconducting parametric amplifiers (SPAs) are critical components for ultralow-noise qubit readout in quantum computing, addressing the critical challenge of amplifying weak quantum signals without introducing noise that degrades coherence and computational fidelity. Unlike classical amplifiers, SPAs can achieve or closely approach quantum-limited performance, specifically the Standard Quantum Limit (SQL) of half a photon of added noise for phase-preserving amplification. The core principle of SPAs relies on parametric amplification, where energy is transferred from a strong pump tone to a weak input signal through non-dissipative nonlinear mixing processes. This is enabled by intrinsic nonlinearities in superconducting materials, primarily kinetic inductance in thin films (e.g., NbTiN, Al) and, more significantly, the Josephson effect in Josephson junctions. These nonlinear elements facilitate frequency mixing (three-wave or four-wave mixing) and can operate in phase-preserving or phase-sensitive amplification modes, with the latter allowing for noise squeezing below the SQL. This chapter emphasizes the significant role of resonator design in determining critical SPA performance metrics such as gain, bandwidth, and noise characteristics. It details both lumped-element (LC) and distributed-element (coplanar waveguide, CPW) resonators, discussing their unique properties, suitability for different frequency ranges, and the importance of achieving high-quality factors (Q) for efficient energy storage and minimal loss. A practical design and simulation of a meandered quarterwavelength CPW resonator coupled to a feed line is presented, illustrating how precise control over geometric parameters optimizes resonant frequency, coupling strength, and quality factor for high-fidelity qubit state discrimination.
Superconducting parametric amplifiers (SPAs) have seen great interest in recent years due to their high gain and quantum limited noise performance. Among these amplifiers, resonant SPAs have been widely developed for experiments where ultralow-noise narrow-band amplification is of interest, such as the search for axion dark matter in particle physics and the detection of spectroscopic lines in astrophysics, while also finding applications in quantum computing. This work presents an amplifier based on a complementary split-ring resonator, patterned on a Nb Ti -coated sapphire substrate embedded within a waveguide, designed to work at a set of four narrow frequency bands throughout the K band (18–27 GHz) using the kinetic inductance of the superconducting film. The S -parameters measured at 400 mK, using a sorption cooler, show the four resonances between 23.3 and 26.3 GHz at 1-GHz spacing, with a maximum transmission on resonance of − 1 dB. Four-wave mixing has been observed with each resonance, and a maximum signal gain of 30 dB has been measured, corresponding to 29 dB of insertion gain. The noise performance of the amplifier has been measured, showing an added noise of 1.2 half-quanta at 400 mK. These results are relevant to high-frequency axion dark matter experiments and help motivate the exploration of higher frequencies in quantum technologies.
Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics.
Abstract Superconducting resonator parametric amplifiers achieve ultra-low-noise amplification through the nonlinear kinetic inductance of thin-film superconductors. One of the main challenges to the operation of these devices is the separation of the strong pump tone from the signal tone after amplification has been achieved. In this paper, we propose and experimentally demonstrate a pump separation method based on operating a half-wave superconducting resonator amplifier behind a cryogenic circulator. Our pump separation scheme does not involve post-amplification interference, and thereby avoids the delicate phase matching of two different pump paths. We demonstrate the scheme using two-port half-wave resonator amplifiers based on superconducting NbN thin-films. We present measurements of gain profiles and degrees of pump separation for amplifiers having different coupling quality factors. On an amplifier having a coupling quality factor of ∼2000, we measured a peak signal gain of 15 dB whilst achieving pump separation of 12 dB . The amplifier was stable for continuous measurements, and the gain drift was measured to be 0.15 dB over an hour. The same amplifier was operated at 3.2 K and achieved a peak signal gain of 11 dB whilst having a pump separation factor of 10.5 dB . The pump separation scheme, and these promising results, will advance the development of superconducting resonator amplifiers as an important technology in quantum sensing.
Near-quantum-limited amplifiers are essential building blocks for high-fidelity readout of superconducting qubits. Josephson parametric amplifiers (JPAs) have been developed to achieve this ultra-low-noise performance [1] in the last two decades by exploiting the quartic term in the nonlinear energy-phase relation of Al-AlO X superconductor-insulator-superconductor Josephson Junctions (SIS JJs). An ongoing research focus is to enhance JPAs’ compression power for processing readout signals in large-scale quantum processors. One approach is to optimize circuit designs to minimize parasitic higher-order nonlinear terms while preserving the quartic nonlinearity for the amplification process. An alternative approach is to make use of new types of JJ devices with small quartic nonlinearity such that parasitic nonlinearities are inherently even lower. Here, we demonstrate that superconductor-semiconductor-superconductor (SSmS) JJs, realized with Al-InAs heterostructures are a promising device to realize quantum-limited amplifiers for superconducting quantum computing. Al-InAs JJs have been used to realize qubits [2] , voltage-tunable resonators [3] , and parametric amplifiers [4] by exploiting critical current tunability via gate voltage ( Fig. 1(a–b) ). In this work, for the first time, we experimentally studied the nonlinear energy-phase relation of Al-InAs JJs and revealed their inherently low quartic nonlinearity. Next, we demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves greater than 20 dB of gain, 6 MHz of bandwidth and −119 dBm of compression power.
Ultralow-noise microwave amplification and detection play a central role in different applications, going from fundamental physics experiments to the deployment of quantum technologies. In many applications the necessity of reading multiple detectors, or cavities or qubits, calls for large bandwidth amplifiers with the lowest possible noise. Current technologies are based on High Electron Mobility Transistors and Josephson Parametric Amplifiers. Both have limitations, the former in terms of the minimum noise, the latter in terms of bandwidth. Superconducting Traveling Wave Parametric Amplifiers (TWPAs) have the potential of offering quantum limited noise and large bandwidth. These amplifiers are based on the parametric amplification of microwaves traveling along a transmission line with embedded nonlinear elements. We are developing superconducting TWPAs based both on Josephson junction arrays (Traveling Wave Josephson Parametric Amplifiers) and on nonlinear kinetic inductance (Dispersion Engineered Traveling Wave Kinetic Inductance Amplifiers). Our goal is to achieve large bandwidth (in the 5 to 10 GHz range), large gain (more than 20 dB), large saturation power (more than −50 dBm), and near quantum limited noise (noise temperature less than 600 mK). Current achievements in the design and development of the high performance TWPAs are here reported and discussed, together with current limitations and possible future developments.
Abstract Superconducting Parametric Amplifiers (SPAs) with near-quantum-limited added noise are crucial for weak signal detection applications such as astronomical receivers, quantum computation, and fundamental physics experiments. Commercially available SPAs include Josephson Parametric Amplifiers (JPAs), which offer high gain but narrow bandwidth performance; and Josephson-junction Travelling Wave Parametric Amplifiers (JTWPAs), which provide broader bandwidth at the cost of a complicated fabrication procedure, lower fabrication yield, and larger footprint area. In this paper, we investigate the parametric amplification of microwave signals in a Josephson array embedded in a low-Q Fabry-Pérot cavity. We fabricated a 500-junction array device and measured >15 dB phase-preserving gain over a ∼350 MHz bandwidth, while offering almost two orders of magnitude improvement in compression point (P 1dB = −106.2 dBm) compared to standard JPAs. Furthermore, using a novel measurement technique, we configured our device to operate in the phase-sensitive mode, measuring a phase-sensitive extinction ratio (PSER) of 42.3 ± 2.81 dB, in line with state-of-the-art values for JPAs. These promising performances, combined with the ease of fabrication and improved yield compared with JTWPAs, underscore the potential of these devices for applications in advanced detection schemes.