Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Nature Communications

Quantum nanophotonics with group IV defects in diamond

Carlo Bradac, Weibo Gao, J. Forneris, Matthew E. Trusheim, Igor Aharonovich

Published Dec 9, 2019• 529 citations
Publisher

Abstract

Diamond photonics is an ever-growing field of research driven by the prospects of harnessing diamond and its colour centres as suitable hardware for solid-state quantum applications. The last two decades have seen the field shaped by the nitrogen-vacancy (NV) centre with both breakthrough fundamental physics demonstrations and practical realizations. Recently however, an entire suite of other diamond defects has emerged-group IV colour centres-namely the Si-, Ge-, Sn- and Pb-vacancies. In this perspective, we highlight the leading techniques for engineering and characterizing these diamond defects, discuss the current state-of-the-art group IV-based devices and provide an outlook of the future directions the field is taking towards the realisation of solid-state quantum photonics with diamond.

DOI
10.1038/s41467-019-13332-w

Related papers

Diamond based nanoelectronics and imaging

Kerem Bray

To investigate new pathways for numerous quantum technologies it is necessary to efficiently fabricate various interesting materials. Single photon sources that are optically and electrically triggerable are the fundamental building blocks required to push the boundaries of several applications, such as realising secure communication technologies. Accordingly, various platforms are being investigated for generation of single photon emitters (SPEs). Diamond is one platform of great interest, due to its ability to host several photostable, optically active SPE defects that can operate at room temperature. Numerous diamond defects have been studied extensively, including the Nitrogen vacancy (NV), Silicon vacancy (SiV) and, recently, the Germanium vacancy (GeV) colour centres. All were shown to be robust room temperature SPEs. Despite promising reports on quantification and applications of diamond-based defects, the search continues to find an emitter that can excel at most applications. \nAnother important factor for the utility of colour centres is the method of excitation. While optical pumping is common practice, the ability to electrically excite emitters is highly desired for optoelectronic applications. Several reports exist on the fabrication and characterisation of electrical device structures of various materials, including Gallium Nitride, Silicon Carbide, Zinc Oxide and diamond defects. The central part of the thesis delves into the fabrication of high aspect ratio, thin, nanoscale, conductive diamond membranes hosting SiV colour centres, which demonstrate key advantages, such as being easily transferrable to a variety of structures. \nSecondly, I investigate unknown narrowband SPEs in diamond nanocrystals, which are preferable for nanophotonic, quantum communications and bio-imaging applications. The origin of the narrowband emission is determined to be point defects localised at extended morphological defects in individual nanodiamond particles. Furthermore, a highly polarised, narrowband, possessing sub GHz optical linewidths was observed at cryogenic temperatures. \nFinally, I exploit the optimal fluorescent, chemical and biocompatibility properties for multi-colour tagging of CHO-K1 and U937 cell lines using both NV- and, for the first time, SiV diamond colour centres, to investigate their intracellular properties. The non-toxic SiV diamond nanocrystals initially dispersed throughout the cell interior while tagged NV nanocrystals localised close to the nucleus. \nTherefore, this work reports new findings in spectroscopic studies of diamond-based colour centres that can be excited optically and electrically. Furthermore, it provides detailed evidence which forms the building blocks for future investigation into diamond-based devices and SPEs for a wide variety of applications. The results presented in this thesis therefore provide a new and interesting platform for applications using defect based nanophotonics.

•Jan 1, 2019•0 citations

Creation and nature of optical centres in diamond for single-photon emission—overview and critical remarks

Sébastien Pezzagna, Detlef Rogalla, Dominik Wildanger +2 more

A huge variety of optical colour centres can be found in diamond, emitting in its whole wide transparency range. Although several of these centres have been demonstrated as single-photon emitters, none of them meets all of the requirements of an ideal single-photon source. In this view, we discuss the properties of prominent optical centres, such as the nitrogen vacancy, the silicon vacancy or the so-called NE8 centre, as well as recently found centres ascribed to defects containing Ni, Si, Cr and Xe. Besides suitable intrinsic properties, it is necessary for practical applications that optical centres can be created artificially on demand. Of all known methods, only ion implantation allows for the most controlled creation of such defect centres. In this paper, we discuss how nanoscalability, that is, the nanometre placement and the deterministic creation of optical centres, can, could or cannot be achieved by the available ion implantation techniques. A fine analysis of individual optical centres is now possible, thanks to the recently developed subdiffraction optical microscopy methods.

New Journal of Physics•Mar 29, 2011•257 citations

The theory of the nitrogen-vacancy colour centre in diamond

Marcus W. Doherty

The nitrogen-vacancy (NV) colour centre in diamond is a model system for many quantum technologies including, metrology, information processing and communications. The NV centre is also highly suitable for employment in various nanotechnology applications, such as biological and sub-diffraction limit imaging, and in tests of fundamental physics, such as cavity quantum electrodynamics and the quantum entanglement of mesoscopic systems. The remarkable properties of the centre are however, not currently fully understood, with several unresolved issues limiting the performance of the centre in its many important applications. As the unresolved issues are interrelated and concern different aspects of the centre's properties, they may only be resolved by the development of a single self-consistent theory of the NV centre. The aim of this work has been to develop such a theory. The theory has been developed using a combination of the molecular model of deep level defects in semiconductors, group theoretical methods and ab initio calculations. The highly structured nature of the theory will enable its future use in the systematic identification of other colour centres that possess properties that exceed those of the NV centre.

•Jan 1, 2012•0 citations

Recent progress in hybrid diamond photonics for quantum information processing and sensing

Ryota Katsumi, Kosuke Takada, Fedor Jelezko +1 more

Point defects in diamond, particularly nitrogen-vacancy (NV) centers, have emerged as powerful tools for a broad range of quantum technologies. These defects are promising candidates for quantum information science, serving as deterministic single-photon sources and solid-state quantum memories. They have also been employed as nanoscale quantum sensors to detect various physical quantities, including magnetic fields, electric fields, and temperature, owing to their long spin coherence time at room temperature. Development of these diamond-based quantum technologies has been rapidly boosted by a recent quantum leap in nanofabrication technologies for high-quality single-crystal diamond. Incorporating these color centers into diamond nanostructures with mature integrated photonics provides a promising route to build scalable and practical systems for quantum applications. This review discusses recent progress and challenges in the hybrid integration of diamond color centers on cutting-edge photonic platforms. Nitrogen-vacancy centers in diamond have emerged as powerful tools for a broad range of quantum technologies. This review discusses recent progress and challenges in the hybrid integration of diamond color centers on cutting-edge photonic platforms.

Communications Engineering•May 8, 2025•86 citations

Nanodiamonds for Integrated Quantum Technology: Charm and Challenge

Janik Wolters, Andreas Wolfgang Schell, Nikola Sadzak +5 more

Defect centers in diamond are regarded as a promising candidate for future solid state quantum technology. In particular the nitrogen vacancy (NV) center attracts researchers attention, as it promises to emit indistinguishable single photons and provides a triplet ground state with ultra long spin coherence times. In particular NV centers in nano diamonds are attractive, since they can be integrated into quantum photonic hybrid devices with nano manipulation techniques. We report on first demonstrations of the integration of NV-centers into photonic hybrid devices, and point out future applications. Beside the striking demonstrations of the integrability, nanodiamonds have several drawbacks. In particular the spectral diffusion of the zero-phonon line is addressed.

Research in Optical Sciences•Jan 1, 2012•1 citation

Chemical vapour deposition diamond single crystals with nitrogen-vacancy centres: a review of material synthesis and technology for quantum sensing applications

Jocelyn Achard, V. Jacques, Alexandre Tallaire

Abstract Diamond hosts a wide variety of colour centres that have demonstrated outstanding optical and spin properties. Among them, the nitrogen-vacancy (NV) centre is by far the most investigated owing to its superior characteristics, which promise the development of highly sophisticated quantum devices, in particular for sensing applications. Nevertheless, harnessing the potential of these centres mainly relies on the availability of high quality and purity diamond single crystals that need to be specially designed and engineered for this purpose. Plasma assisted chemical vapour deposition (CVD) has become a key enabling technology in this field of research. Nitrogen can indeed be directly doped in situ into a high crystalline quality diamond matrix in a controlled way, allowing the production of single isolated centres or ensembles that can potentially be integrated into a device. In this paper we will provide an overview of the requirements for synthesizing ‘quantum-grade’ diamond films using CVD. These include the reduction of impurities and surrounding spins that limit coherence times, the control of NV density in a wide range of concentrations as well as their spatial localization within the diamond. Enhancing the charge state and preferential orientation of the colour centres is also discussed. These improvements in material fabrication have contributed to positioning diamond as one of the most promising solid-state quantum systems and the first industrial applications in sensing are just starting to emerge.

arXiv:1912.09749•Journal of Physics D Applied Physics•Mar 20, 2020•136 citations
Diamond photonics is an ever-growing field of research driven by the prospects of harnessing diamond and its colour centres as suitable hardware for solid-state quantum applications. The last two decades have seen the field shaped by the nitrogen-vacancy (NV) centre with both breakthrough fundamental physics demonstrations and practical realizations. Recently however, an entire suite of other diamond defects has emerged-group IV colour centres-namely the Si-, Ge-, Sn- and Pb-vacancies. In this perspective, we highlight the leading techniques for engineering and characterizing these diamond defects, discuss the current state-of-the-art group IV-based devices and provide an outlook of the future directions the field is taking towards the realisation of solid-state quantum photonics with diamond.
To investigate new pathways for numerous quantum technologies it is necessary to efficiently fabricate various interesting materials. Single photon sources that are optically and electrically triggerable are the fundamental building blocks required to push the boundaries of several applications, such as realising secure communication technologies. Accordingly, various platforms are being investigated for generation of single photon emitters (SPEs). Diamond is one platform of great interest, due to its ability to host several photostable, optically active SPE defects that can operate at room temperature. Numerous diamond defects have been studied extensively, including the Nitrogen vacancy (NV), Silicon vacancy (SiV) and, recently, the Germanium vacancy (GeV) colour centres. All were shown to be robust room temperature SPEs. Despite promising reports on quantification and applications of diamond-based defects, the search continues to find an emitter that can excel at most applications. \nAnother important factor for the utility of colour centres is the method of excitation. While optical pumping is common practice, the ability to electrically excite emitters is highly desired for optoelectronic applications. Several reports exist on the fabrication and characterisation of electrical device structures of various materials, including Gallium Nitride, Silicon Carbide, Zinc Oxide and diamond defects. The central part of the thesis delves into the fabrication of high aspect ratio, thin, nanoscale, conductive diamond membranes hosting SiV colour centres, which demonstrate key advantages, such as being easily transferrable to a variety of structures. \nSecondly, I investigate unknown narrowband SPEs in diamond nanocrystals, which are preferable for nanophotonic, quantum communications and bio-imaging applications. The origin of the narrowband emission is determined to be point defects localised at extended morphological defects in individual nanodiamond particles. Furthermore, a highly polarised, narrowband, possessing sub GHz optical linewidths was observed at cryogenic temperatures. \nFinally, I exploit the optimal fluorescent, chemical and biocompatibility properties for multi-colour tagging of CHO-K1 and U937 cell lines using both NV- and, for the first time, SiV diamond colour centres, to investigate their intracellular properties. The non-toxic SiV diamond nanocrystals initially dispersed throughout the cell interior while tagged NV nanocrystals localised close to the nucleus. \nTherefore, this work reports new findings in spectroscopic studies of diamond-based colour centres that can be excited optically and electrically. Furthermore, it provides detailed evidence which forms the building blocks for future investigation into diamond-based devices and SPEs for a wide variety of applications. The results presented in this thesis therefore provide a new and interesting platform for applications using defect based nanophotonics.
A huge variety of optical colour centres can be found in diamond, emitting in its whole wide transparency range. Although several of these centres have been demonstrated as single-photon emitters, none of them meets all of the requirements of an ideal single-photon source. In this view, we discuss the properties of prominent optical centres, such as the nitrogen vacancy, the silicon vacancy or the so-called NE8 centre, as well as recently found centres ascribed to defects containing Ni, Si, Cr and Xe. Besides suitable intrinsic properties, it is necessary for practical applications that optical centres can be created artificially on demand. Of all known methods, only ion implantation allows for the most controlled creation of such defect centres. In this paper, we discuss how nanoscalability, that is, the nanometre placement and the deterministic creation of optical centres, can, could or cannot be achieved by the available ion implantation techniques. A fine analysis of individual optical centres is now possible, thanks to the recently developed subdiffraction optical microscopy methods.
The nitrogen-vacancy (NV) colour centre in diamond is a model system for many quantum technologies including, metrology, information processing and communications. The NV centre is also highly suitable for employment in various nanotechnology applications, such as biological and sub-diffraction limit imaging, and in tests of fundamental physics, such as cavity quantum electrodynamics and the quantum entanglement of mesoscopic systems. The remarkable properties of the centre are however, not currently fully understood, with several unresolved issues limiting the performance of the centre in its many important applications. As the unresolved issues are interrelated and concern different aspects of the centre's properties, they may only be resolved by the development of a single self-consistent theory of the NV centre. The aim of this work has been to develop such a theory. The theory has been developed using a combination of the molecular model of deep level defects in semiconductors, group theoretical methods and ab initio calculations. The highly structured nature of the theory will enable its future use in the systematic identification of other colour centres that possess properties that exceed those of the NV centre.
Point defects in diamond, particularly nitrogen-vacancy (NV) centers, have emerged as powerful tools for a broad range of quantum technologies. These defects are promising candidates for quantum information science, serving as deterministic single-photon sources and solid-state quantum memories. They have also been employed as nanoscale quantum sensors to detect various physical quantities, including magnetic fields, electric fields, and temperature, owing to their long spin coherence time at room temperature. Development of these diamond-based quantum technologies has been rapidly boosted by a recent quantum leap in nanofabrication technologies for high-quality single-crystal diamond. Incorporating these color centers into diamond nanostructures with mature integrated photonics provides a promising route to build scalable and practical systems for quantum applications. This review discusses recent progress and challenges in the hybrid integration of diamond color centers on cutting-edge photonic platforms. Nitrogen-vacancy centers in diamond have emerged as powerful tools for a broad range of quantum technologies. This review discusses recent progress and challenges in the hybrid integration of diamond color centers on cutting-edge photonic platforms.
Defect centers in diamond are regarded as a promising candidate for future solid state quantum technology. In particular the nitrogen vacancy (NV) center attracts researchers attention, as it promises to emit indistinguishable single photons and provides a triplet ground state with ultra long spin coherence times. In particular NV centers in nano diamonds are attractive, since they can be integrated into quantum photonic hybrid devices with nano manipulation techniques. We report on first demonstrations of the integration of NV-centers into photonic hybrid devices, and point out future applications. Beside the striking demonstrations of the integrability, nanodiamonds have several drawbacks. In particular the spectral diffusion of the zero-phonon line is addressed.
Abstract Diamond hosts a wide variety of colour centres that have demonstrated outstanding optical and spin properties. Among them, the nitrogen-vacancy (NV) centre is by far the most investigated owing to its superior characteristics, which promise the development of highly sophisticated quantum devices, in particular for sensing applications. Nevertheless, harnessing the potential of these centres mainly relies on the availability of high quality and purity diamond single crystals that need to be specially designed and engineered for this purpose. Plasma assisted chemical vapour deposition (CVD) has become a key enabling technology in this field of research. Nitrogen can indeed be directly doped in situ into a high crystalline quality diamond matrix in a controlled way, allowing the production of single isolated centres or ensembles that can potentially be integrated into a device. In this paper we will provide an overview of the requirements for synthesizing ‘quantum-grade’ diamond films using CVD. These include the reduction of impurities and surrounding spins that limit coherence times, the control of NV density in a wide range of concentrations as well as their spatial localization within the diamond. Enhancing the charge state and preferential orientation of the colour centres is also discussed. These improvements in material fabrication have contributed to positioning diamond as one of the most promising solid-state quantum systems and the first industrial applications in sensing are just starting to emerge.