Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

New Journal of Physics

Creation and nature of optical centres in diamond for single-photon emission—overview and critical remarks

Sébastien Pezzagna, Detlef Rogalla, Dominik Wildanger, Jan Meijer, Alexander M. Zaitsev

Published Mar 29, 2011• 257 citations
Publisher

Abstract

A huge variety of optical colour centres can be found in diamond, emitting in its whole wide transparency range. Although several of these centres have been demonstrated as single-photon emitters, none of them meets all of the requirements of an ideal single-photon source. In this view, we discuss the properties of prominent optical centres, such as the nitrogen vacancy, the silicon vacancy or the so-called NE8 centre, as well as recently found centres ascribed to defects containing Ni, Si, Cr and Xe. Besides suitable intrinsic properties, it is necessary for practical applications that optical centres can be created artificially on demand. Of all known methods, only ion implantation allows for the most controlled creation of such defect centres. In this paper, we discuss how nanoscalability, that is, the nanometre placement and the deterministic creation of optical centres, can, could or cannot be achieved by the available ion implantation techniques. A fine analysis of individual optical centres is now possible, thanks to the recently developed subdiffraction optical microscopy methods.

DOI
10.1088/1367-2630/13/3/035024

Related papers

Screening and engineering of colour centres in diamond

Tobias Lühmann, Nicole Raatz, Roger John +11 more

Abstract We present a high throughput and systematic method for the screening of colour centres in diamond with the aim of searching for and reproducibly creating new optical centres down to the single defect level, potentially of interest for a wide range of diamond-based quantum applications. The screening method presented here should, moreover, help to identify some already indexed defects among hundreds in diamond (Zaitsev 2001 Optical Properties of Diamond (Berlin: Springer)) but also some promising defects of a still unknown nature, such as the recently discovered ST1 centre (Lee et al 2013 Nat. Nanotechnol . 8 487; John et al 2017 New J. Phys . 19 053008). We use ion implantation in a systematic manner to implant several chemical elements. Ion implantation has the advantage of addressing single atoms inside the bulk with defined depth and high lateral resolution, but the disadvantage of producing intrinsic defects. The implanted samples are annealed in vacuum at different temperatures (between 600 °C and 1600 °C with 200 °C steps) and fully characterised at each step in order to follow the evolution of the defects: formation, dissociation, diffusion, re-formation and charge state, at the ensemble level and, if possible, at the single centre level. We review the unavoidable ion implantation defects (such as the GR1 and 3H centres), discuss ion channeling and thermal annealing and estimate the diffusion of the vacancies, nitrogen and hydrogen. We use different characterisation methods best suited for our study (from widefield fluorescence down to sub-diffraction optical imaging of single centres) and discuss reproducibility issues due to diamond and defect inhomogeneities. Nitrogen is also implanted for reference, taking advantage of the considerable knowledge on NV centres as a versatile sensor in order to retrieve or deduce the conditions and local environment in which the different implanted chemical elements are embedded. We show here the preliminary promising results of a long-term study and focus on the elements O, Mg, Ca, F and P from which fluorescent centres were found.

Journal of Physics D Applied Physics•Sep 7, 2018•96 citations

Towards hybrid diamond optical devices

Brant C. Gibson, Stefania Castelletto, T. J. Karle +11 more

Diamond is emerging as an optical supermaterial, due to its wide transparency bandwidth, excellent thermooptic properties and most notably its stable, large dipole moment, room temperature, single photon emitting colour centres. In this paper we present recent progress in the characterization of non radiative and radiative decay in single impurities and the fabrication of hybrid diamond-tellurite optical structures.. First, we present direct imaging of the emission pattern of individual ion implanted chromium-based single photon emitters in diamond and measure their quantum efficiency. By comparing the decay rates from the single chromium emitters at different depths in the diamond crystal, we measured an average quantum efficiency of 28%. Second, a hybrid approach involving a soft glass tellurite host material has been introduced, allowing nitrogen-vacancy (NV-) diamond emitters to be built into an optical fibre. The potential of integrating Cr-related centres in hybrid optical structures is also discussed.

International Conference on Transparent Optical Networks•Jun 1, 2011•0 citations

Coherence properties of a single dipole emitter in diamond

Graham D Marshall, T. Gaebel, Jonathan C F Matthews +3 more

On-demand, high repetition rate sources of indistinguishable, polarized single photons are the key component for future photonic quantum technologies (O'Brien et al 2009 Nat. Photonics 3 687–95). Colour centres in diamond offer a promising solution, and the narrow linewidth of the recently identified nickel-based NE8 centre makes it particularly appealing for realizing the transform-limited sources necessary for quantum interference. Here, we report the characterization of dipole orientation and coherence properties of a single NE8 colour centre in a diamond nanocrystal at room temperature. We observe a single-photon coherence time of 0.21 ps and an emission lifetime of 1.5 ns. Combined with an emission wavelength that is ideally suited for applications in existing quantum optical systems, these results show that NE8 is a far more promising source than the more commonly studied nitrogen-vacancy centre and point the way to the realization of a practical diamond colour centre-based single-photon source.

arXiv:1009.2272•New Journal of Physics•May 26, 2011•21 citations

Diamond based nanoelectronics and imaging

Kerem Bray

To investigate new pathways for numerous quantum technologies it is necessary to efficiently fabricate various interesting materials. Single photon sources that are optically and electrically triggerable are the fundamental building blocks required to push the boundaries of several applications, such as realising secure communication technologies. Accordingly, various platforms are being investigated for generation of single photon emitters (SPEs). Diamond is one platform of great interest, due to its ability to host several photostable, optically active SPE defects that can operate at room temperature. Numerous diamond defects have been studied extensively, including the Nitrogen vacancy (NV), Silicon vacancy (SiV) and, recently, the Germanium vacancy (GeV) colour centres. All were shown to be robust room temperature SPEs. Despite promising reports on quantification and applications of diamond-based defects, the search continues to find an emitter that can excel at most applications. \nAnother important factor for the utility of colour centres is the method of excitation. While optical pumping is common practice, the ability to electrically excite emitters is highly desired for optoelectronic applications. Several reports exist on the fabrication and characterisation of electrical device structures of various materials, including Gallium Nitride, Silicon Carbide, Zinc Oxide and diamond defects. The central part of the thesis delves into the fabrication of high aspect ratio, thin, nanoscale, conductive diamond membranes hosting SiV colour centres, which demonstrate key advantages, such as being easily transferrable to a variety of structures. \nSecondly, I investigate unknown narrowband SPEs in diamond nanocrystals, which are preferable for nanophotonic, quantum communications and bio-imaging applications. The origin of the narrowband emission is determined to be point defects localised at extended morphological defects in individual nanodiamond particles. Furthermore, a highly polarised, narrowband, possessing sub GHz optical linewidths was observed at cryogenic temperatures. \nFinally, I exploit the optimal fluorescent, chemical and biocompatibility properties for multi-colour tagging of CHO-K1 and U937 cell lines using both NV- and, for the first time, SiV diamond colour centres, to investigate their intracellular properties. The non-toxic SiV diamond nanocrystals initially dispersed throughout the cell interior while tagged NV nanocrystals localised close to the nucleus. \nTherefore, this work reports new findings in spectroscopic studies of diamond-based colour centres that can be excited optically and electrically. Furthermore, it provides detailed evidence which forms the building blocks for future investigation into diamond-based devices and SPEs for a wide variety of applications. The results presented in this thesis therefore provide a new and interesting platform for applications using defect based nanophotonics.

•Jan 1, 2019•0 citations

Native NIR-emitting single colour centres in CVD diamond

D. Gatto Monticone, P. Traina, Ekaterina V. Moreva +8 more

Single-photon sources are a fundamental element for developing quantum technologies, and sources based on colour centres in diamonds are among the most promising candidates. The well-known nitrogen vacancy centres are characterized by several limitations, and thus few other defects have recently been considered. In the present work, we characterize, in detail, native efficient single colour centres emitting in the near infra-red ( λ = 740–780 nm) in both standard IIa single-crystal and electronic-grade polycrystalline commercial chemical vapour deposited (CVD) diamond samples. In the former case, a high-temperature ( T > 1000 °C) annealing process in vacuum is necessary to induce the formation/activation of luminescent centres with good emission properties, while in the latter case the annealing process has marginally beneficial effects on the number and performance of native centres in commercially available samples. Although displaying significant variability in several photo-physical properties (emission wavelength, emission rate instabilities, saturation behaviours), these centres generally display appealing photophysical properties for applications as single photon sources: short lifetimes (0.7–3 ns), high emission rates (∼50–500 × 10 3 photons s −1 ) and strongly (>95%) polarized light. The native centres are tentatively attributed to impurities incorporated in the diamond crystal during the CVD growth of high-quality type-IIa samples, and offer promising perspectives in diamond-based photonics.

arXiv:1403.4394•New Journal of Physics•May 1, 2014•38 citations

Nickel related optical centres in diamond created by ion implantation

Julius O. Orwa, Igor Aharonovich, Fedor Jelezko +6 more

Ni-related optical centres in diamond are promising as alternatives to the nitrogen vacancy (NV) centre for quantum applications and biomarking. In order to achieve the reliability and reproducibility required, a method for producing the Ni-related centres in a controllable manner needs to be established. In this study, we have attempted this control by implanting high purity CVD diamond samples with Ni and N followed by thermal annealing. Samples implanted with Ni show a new Ni-related PL peak centered at 711 nm and a well known doublet at 883/885 nm along with weak NV luminescence. The optical properties of the two Ni-related defects are investigated. In particular, an excited state lifetime of the 883/885 nm peak is measured to be 11.6 ns.

Journal of Applied Physics•May 1, 2010•44 citations
A huge variety of optical colour centres can be found in diamond, emitting in its whole wide transparency range. Although several of these centres have been demonstrated as single-photon emitters, none of them meets all of the requirements of an ideal single-photon source. In this view, we discuss the properties of prominent optical centres, such as the nitrogen vacancy, the silicon vacancy or the so-called NE8 centre, as well as recently found centres ascribed to defects containing Ni, Si, Cr and Xe. Besides suitable intrinsic properties, it is necessary for practical applications that optical centres can be created artificially on demand. Of all known methods, only ion implantation allows for the most controlled creation of such defect centres. In this paper, we discuss how nanoscalability, that is, the nanometre placement and the deterministic creation of optical centres, can, could or cannot be achieved by the available ion implantation techniques. A fine analysis of individual optical centres is now possible, thanks to the recently developed subdiffraction optical microscopy methods.
Abstract We present a high throughput and systematic method for the screening of colour centres in diamond with the aim of searching for and reproducibly creating new optical centres down to the single defect level, potentially of interest for a wide range of diamond-based quantum applications. The screening method presented here should, moreover, help to identify some already indexed defects among hundreds in diamond (Zaitsev 2001 Optical Properties of Diamond (Berlin: Springer)) but also some promising defects of a still unknown nature, such as the recently discovered ST1 centre (Lee et al 2013 Nat. Nanotechnol . 8 487; John et al 2017 New J. Phys . 19 053008). We use ion implantation in a systematic manner to implant several chemical elements. Ion implantation has the advantage of addressing single atoms inside the bulk with defined depth and high lateral resolution, but the disadvantage of producing intrinsic defects. The implanted samples are annealed in vacuum at different temperatures (between 600 °C and 1600 °C with 200 °C steps) and fully characterised at each step in order to follow the evolution of the defects: formation, dissociation, diffusion, re-formation and charge state, at the ensemble level and, if possible, at the single centre level. We review the unavoidable ion implantation defects (such as the GR1 and 3H centres), discuss ion channeling and thermal annealing and estimate the diffusion of the vacancies, nitrogen and hydrogen. We use different characterisation methods best suited for our study (from widefield fluorescence down to sub-diffraction optical imaging of single centres) and discuss reproducibility issues due to diamond and defect inhomogeneities. Nitrogen is also implanted for reference, taking advantage of the considerable knowledge on NV centres as a versatile sensor in order to retrieve or deduce the conditions and local environment in which the different implanted chemical elements are embedded. We show here the preliminary promising results of a long-term study and focus on the elements O, Mg, Ca, F and P from which fluorescent centres were found.
Diamond is emerging as an optical supermaterial, due to its wide transparency bandwidth, excellent thermooptic properties and most notably its stable, large dipole moment, room temperature, single photon emitting colour centres. In this paper we present recent progress in the characterization of non radiative and radiative decay in single impurities and the fabrication of hybrid diamond-tellurite optical structures.. First, we present direct imaging of the emission pattern of individual ion implanted chromium-based single photon emitters in diamond and measure their quantum efficiency. By comparing the decay rates from the single chromium emitters at different depths in the diamond crystal, we measured an average quantum efficiency of 28%. Second, a hybrid approach involving a soft glass tellurite host material has been introduced, allowing nitrogen-vacancy (NV-) diamond emitters to be built into an optical fibre. The potential of integrating Cr-related centres in hybrid optical structures is also discussed.
On-demand, high repetition rate sources of indistinguishable, polarized single photons are the key component for future photonic quantum technologies (O'Brien et al 2009 Nat. Photonics 3 687–95). Colour centres in diamond offer a promising solution, and the narrow linewidth of the recently identified nickel-based NE8 centre makes it particularly appealing for realizing the transform-limited sources necessary for quantum interference. Here, we report the characterization of dipole orientation and coherence properties of a single NE8 colour centre in a diamond nanocrystal at room temperature. We observe a single-photon coherence time of 0.21 ps and an emission lifetime of 1.5 ns. Combined with an emission wavelength that is ideally suited for applications in existing quantum optical systems, these results show that NE8 is a far more promising source than the more commonly studied nitrogen-vacancy centre and point the way to the realization of a practical diamond colour centre-based single-photon source.
To investigate new pathways for numerous quantum technologies it is necessary to efficiently fabricate various interesting materials. Single photon sources that are optically and electrically triggerable are the fundamental building blocks required to push the boundaries of several applications, such as realising secure communication technologies. Accordingly, various platforms are being investigated for generation of single photon emitters (SPEs). Diamond is one platform of great interest, due to its ability to host several photostable, optically active SPE defects that can operate at room temperature. Numerous diamond defects have been studied extensively, including the Nitrogen vacancy (NV), Silicon vacancy (SiV) and, recently, the Germanium vacancy (GeV) colour centres. All were shown to be robust room temperature SPEs. Despite promising reports on quantification and applications of diamond-based defects, the search continues to find an emitter that can excel at most applications. \nAnother important factor for the utility of colour centres is the method of excitation. While optical pumping is common practice, the ability to electrically excite emitters is highly desired for optoelectronic applications. Several reports exist on the fabrication and characterisation of electrical device structures of various materials, including Gallium Nitride, Silicon Carbide, Zinc Oxide and diamond defects. The central part of the thesis delves into the fabrication of high aspect ratio, thin, nanoscale, conductive diamond membranes hosting SiV colour centres, which demonstrate key advantages, such as being easily transferrable to a variety of structures. \nSecondly, I investigate unknown narrowband SPEs in diamond nanocrystals, which are preferable for nanophotonic, quantum communications and bio-imaging applications. The origin of the narrowband emission is determined to be point defects localised at extended morphological defects in individual nanodiamond particles. Furthermore, a highly polarised, narrowband, possessing sub GHz optical linewidths was observed at cryogenic temperatures. \nFinally, I exploit the optimal fluorescent, chemical and biocompatibility properties for multi-colour tagging of CHO-K1 and U937 cell lines using both NV- and, for the first time, SiV diamond colour centres, to investigate their intracellular properties. The non-toxic SiV diamond nanocrystals initially dispersed throughout the cell interior while tagged NV nanocrystals localised close to the nucleus. \nTherefore, this work reports new findings in spectroscopic studies of diamond-based colour centres that can be excited optically and electrically. Furthermore, it provides detailed evidence which forms the building blocks for future investigation into diamond-based devices and SPEs for a wide variety of applications. The results presented in this thesis therefore provide a new and interesting platform for applications using defect based nanophotonics.
Single-photon sources are a fundamental element for developing quantum technologies, and sources based on colour centres in diamonds are among the most promising candidates. The well-known nitrogen vacancy centres are characterized by several limitations, and thus few other defects have recently been considered. In the present work, we characterize, in detail, native efficient single colour centres emitting in the near infra-red ( λ = 740–780 nm) in both standard IIa single-crystal and electronic-grade polycrystalline commercial chemical vapour deposited (CVD) diamond samples. In the former case, a high-temperature ( T > 1000 °C) annealing process in vacuum is necessary to induce the formation/activation of luminescent centres with good emission properties, while in the latter case the annealing process has marginally beneficial effects on the number and performance of native centres in commercially available samples. Although displaying significant variability in several photo-physical properties (emission wavelength, emission rate instabilities, saturation behaviours), these centres generally display appealing photophysical properties for applications as single photon sources: short lifetimes (0.7–3 ns), high emission rates (∼50–500 × 10 3 photons s −1 ) and strongly (>95%) polarized light. The native centres are tentatively attributed to impurities incorporated in the diamond crystal during the CVD growth of high-quality type-IIa samples, and offer promising perspectives in diamond-based photonics.
Ni-related optical centres in diamond are promising as alternatives to the nitrogen vacancy (NV) centre for quantum applications and biomarking. In order to achieve the reliability and reproducibility required, a method for producing the Ni-related centres in a controllable manner needs to be established. In this study, we have attempted this control by implanting high purity CVD diamond samples with Ni and N followed by thermal annealing. Samples implanted with Ni show a new Ni-related PL peak centered at 711 nm and a well known doublet at 883/885 nm along with weak NV luminescence. The optical properties of the two Ni-related defects are investigated. In particular, an excited state lifetime of the 883/885 nm peak is measured to be 11.6 ns.