To investigate new pathways for numerous quantum technologies it is necessary to efficiently fabricate various interesting materials. Single photon sources that are optically and electrically triggerable are the fundamental building blocks required to push the boundaries of several applications, such as realising secure communication technologies. Accordingly, various platforms are being investigated for generation of single photon emitters (SPEs). Diamond is one platform of great interest, due to its ability to host several photostable, optically active SPE defects that can operate at room temperature. Numerous diamond defects have been studied extensively, including the Nitrogen vacancy (NV), Silicon vacancy (SiV) and, recently, the Germanium vacancy (GeV) colour centres. All were shown to be robust room temperature SPEs. Despite promising reports on quantification and applications of diamond-based defects, the search continues to find an emitter that can excel at most applications. \nAnother important factor for the utility of colour centres is the method of excitation. While optical pumping is common practice, the ability to electrically excite emitters is highly desired for optoelectronic applications. Several reports exist on the fabrication and characterisation of electrical device structures of various materials, including Gallium Nitride, Silicon Carbide, Zinc Oxide and diamond defects. The central part of the thesis delves into the fabrication of high aspect ratio, thin, nanoscale, conductive diamond membranes hosting SiV colour centres, which demonstrate key advantages, such as being easily transferrable to a variety of structures. \nSecondly, I investigate unknown narrowband SPEs in diamond nanocrystals, which are preferable for nanophotonic, quantum communications and bio-imaging applications. The origin of the narrowband emission is determined to be point defects localised at extended morphological defects in individual nanodiamond particles. Furthermore, a highly polarised, narrowband, possessing sub GHz optical linewidths was observed at cryogenic temperatures. \nFinally, I exploit the optimal fluorescent, chemical and biocompatibility properties for multi-colour tagging of CHO-K1 and U937 cell lines using both NV- and, for the first time, SiV diamond colour centres, to investigate their intracellular properties. The non-toxic SiV diamond nanocrystals initially dispersed throughout the cell interior while tagged NV nanocrystals localised close to the nucleus. \nTherefore, this work reports new findings in spectroscopic studies of diamond-based colour centres that can be excited optically and electrically. Furthermore, it provides detailed evidence which forms the building blocks for future investigation into diamond-based devices and SPEs for a wide variety of applications. The results presented in this thesis therefore provide a new and interesting platform for applications using defect based nanophotonics.
To investigate new pathways for numerous quantum technologies it is necessary to efficiently fabricate various interesting materials. Single photon sources that are optically and electrically triggerable are the fundamental building blocks required to push the boundaries of several applications, such as realising secure communication technologies. Accordingly, various platforms are being investigated for generation of single photon emitters (SPEs). Diamond is one platform of great interest, due to its ability to host several photostable, optically active SPE defects that can operate at room temperature. Numerous diamond defects have been studied extensively, including the Nitrogen vacancy (NV), Silicon vacancy (SiV) and, recently, the Germanium vacancy (GeV) colour centres. All were shown to be robust room temperature SPEs. Despite promising reports on quantification and applications of diamond-based defects, the search continues to find an emitter that can excel at most applications. \nAnother important factor for the utility of colour centres is the method of excitation. While optical pumping is common practice, the ability to electrically excite emitters is highly desired for optoelectronic applications. Several reports exist on the fabrication and characterisation of electrical device structures of various materials, including Gallium Nitride, Silicon Carbide, Zinc Oxide and diamond defects. The central part of the thesis delves into the fabrication of high aspect ratio, thin, nanoscale, conductive diamond membranes hosting SiV colour centres, which demonstrate key advantages, such as being easily transferrable to a variety of structures. \nSecondly, I investigate unknown narrowband SPEs in diamond nanocrystals, which are preferable for nanophotonic, quantum communications and bio-imaging applications. The origin of the narrowband emission is determined to be point defects localised at extended morphological defects in individual nanodiamond particles. Furthermore, a highly polarised, narrowband, possessing sub GHz optical linewidths was observed at cryogenic temperatures. \nFinally, I exploit the optimal fluorescent, chemical and biocompatibility properties for multi-colour tagging of CHO-K1 and U937 cell lines using both NV- and, for the first time, SiV diamond colour centres, to investigate their intracellular properties. The non-toxic SiV diamond nanocrystals initially dispersed throughout the cell interior while tagged NV nanocrystals localised close to the nucleus. \nTherefore, this work reports new findings in spectroscopic studies of diamond-based colour centres that can be excited optically and electrically. Furthermore, it provides detailed evidence which forms the building blocks for future investigation into diamond-based devices and SPEs for a wide variety of applications. The results presented in this thesis therefore provide a new and interesting platform for applications using defect based nanophotonics.
Diamond is unique. Whether mechanical, thermal, electrical or optical, its properties are within the most extreme compared to those of any other material. This, together with the fact that in the last fifty years the synthesis of artificial diamond has become a reality, makes it very attractive for engineering and technological purposes. The range of diamond-based applications is very diverse and, among the others, includes its use in mechanical machining, high-power high-frequency electronics and high transmissivity optics. -- Diamond is also host to a wide variety of crystallographic defects. Appropriately controlled, they can be used to tune the characteristics of the material, but even more interestingly they often possess attractive optical properties on their own. In particular, nitrogen-vacancy (NV) centres in diamond have been the subject of extensive study in the last few years. They possess unique room-temperature optical and spin properties which make them promising systems for solid-state qubits in quantum information technologies and for emerging applications in biotechnology, nanomedicine and high resolution magnetometry, such as drug delivery, fluorescent biomarking and spin imaging. -- This thesis is focused on NV centres in diamond. I first present an extensive review on diamond as a material, describing in detail its physical properties, the methods that have been developed to synthesise it and some of its possible applications. I then move the attention specifically to NV centres in nanodiamonds (NDs), i.e. diamond crystals in the nanometre size range (0-100 nm). They are a potential candidate for emerging technologies including high-resolution magnetometry and biomedical imaging. For these applications, specific material requirements, such as the small size of the diamond nanocrystals and the optical stability of the hosted NV centres, are crucial. The NV stability with respect to the nanodiamond size and surface is the central theme of this thesis. I analyse the optical behaviour of NV centres in nanodiamond while varying a number of key parameters such as size, surface termination and diamond origin. Based on the measurements, I conclude whether the nanodiamond size and the NV surface proximity are factors that must be taken into consideration in order to control the material and realise nanotechnologies based on NV centres in nanodiamonds.
Quantum communication and quantum metrology established a demand for an accessible solid state systems which can generate a stream of single photons on demand [1]. Although single photon emission has been demonstrated from quantum dots (QD)[1,2], single molecules [3] and nanowires [4], their practical operation is limited by the temperature or photostability. Diamond crystals, however, are the most promising platform for generation of robust, photo-stable, single photons at room temperature [5,6]. Nevertheless, out of more than 500 existing optical centers in diamond only three known centers demonstrated a clear single photon emission: the nitrogen-vacancy complex [6,7], the silicon-vacancy complex [8] and the nickel-nitrogen complex [9,10]. Recent progress in materials science and fabrication techniques of diamond color centers unveiled novel quantum emitters with photo-physical properties surpassing the current mainstream [11,12,13]. Consequently, the versatility of the diamond lattice to host various impurities which give luminescence signals lead to a dramatic discovery of ultra bright single photon emitters operating in the MHz regime [14]. These new centers, comparable with QD in terms of brightness [1], but have the tremendous advantage of their room temperature operation and photo-stability. Furthermore, it opened a new avenue to investigate essentially an unknown group of single photon emitters. A brief description of the fabrication methods and a detailed quantum optical characterization of this class of diamond emitters is the subject of this presentation. In particular we will present the photo-physical properties of a novel family of single photon emitters, most likely originated from Cr impurities within the chemical vapor deposition grown nano-diamond crystals. We concentrate on the typical emission lines in the range of 740 - 790 nm, which exhibit single photon emission with count rate in the range of 0.8-3.2 106 counts/s at the limit of infinite optical excitation power, and life time as short as 1 ns. Even more, some of the emitters exhibit a photon statistics without any photon bunching, indicating a two-level system with unitary quantum efficiency. We will also show preliminary results of a resonant excitation at 4 K. We will highlight future directions to optimize these sources and avenues to investigate the fundamental properties of these centers.
Optical sources that deliver single photons on demand play a key role in quantum cryptography and optical quantum computations. At present, color centers in wide-bandgap semiconductors, such as the nitrogen-vacancy (NV) and silicon-vacancy (SiV) centers in diamond, are considered to be the most promising candidates for practical quantum information applications owing to their unique emission properties at room temperature. However, for practical reasons, single-photon sources should be pumped electrically, which is required for integrability, scalability, and energy efficiency. However, diamond and related wide-bandgap semiconductor materials are at the interface between insulators and semiconductors, which makes electrical excitation of color centers very challenging. Here, we report on our progress in the understanding of single-photon electroluminescence of color centers in diamond, discuss different factors affecting the brightness of these emitter under electrical excitation, and study how to improve the performance of electrically- pumped single-photon sources based on color centers in diamond.
A huge variety of optical colour centres can be found in diamond, emitting in its whole wide transparency range. Although several of these centres have been demonstrated as single-photon emitters, none of them meets all of the requirements of an ideal single-photon source. In this view, we discuss the properties of prominent optical centres, such as the nitrogen vacancy, the silicon vacancy or the so-called NE8 centre, as well as recently found centres ascribed to defects containing Ni, Si, Cr and Xe. Besides suitable intrinsic properties, it is necessary for practical applications that optical centres can be created artificially on demand. Of all known methods, only ion implantation allows for the most controlled creation of such defect centres. In this paper, we discuss how nanoscalability, that is, the nanometre placement and the deterministic creation of optical centres, can, could or cannot be achieved by the available ion implantation techniques. A fine analysis of individual optical centres is now possible, thanks to the recently developed subdiffraction optical microscopy methods.
This thesis is focused on the production and characterization of diamond films and diamond nanoparticles containing custom colour centres. These defects intentionally created into the diamond lattice are promising candidates for single photon sources, and are becoming more important for quantum information technologies as photons can carry quantum information over long distances. With outstanding properties such as up to 80% of the photons emitted into the zero phonon line (ZPL), single photon count rates up to several Mcps under continuous excitation and a narrow ZPL at room temperature, the SiV centre has recently attracted more attention. Although different approaches for the creation of colour centres have been reported, this thesis details the creation of SiV centres by chemical vapour deposition. Colour centres are created through the incorporation of impurities during diamond growth. While Si doping can easily be achieved due to plasma etching of Si substrates or the incorporation of a Si solid source inside the reactor vacuum chamber, controlling the exact amount of Si present in the gas phase or effectively incorporated is still a handicap. Chapters five and six show comprehensive studies performed towards the creation of diamond nanoparticles with single emitters. Control over the Si content within the gas phase is achieved using silane as gas source. The subsequent milling of the diamond films hosting the SiV centres and their inclusion into a stable solution, will facilitate SiV coupling and incorporation into cavities or emission-enhancer devices.
Very recently, the interest for quantum technologies by the scientific community and industry has strongly increased. Different types of implementations have been proposed as a practical implementation for a quantum bit. In particular, quantum photonics is a strong candidate for such applications. We are interested in using single photons and single spins in diamond as a solid state host matrix (nanodiamonds or membranes). Integration of nanosources of light is currently a major bottleneck preventing the realisation of all-photonic chips for quantum technologies and nanophotonics applications. Ideally, one needs optical circuitry, on-chip photodetection and on-chip generation of quantum states of light (single photons, entangled photons…). Our recent work on a new platform for quantum photonics using integrated optics can offer an easier and robust way to create compact quantum circuits that can be on chip and scalable. In this context, the coupling between waveguides and single photon emitters is critical. The goal of our research is to efficiently couple single photon emitters with a new platform made of optical glass waveguides. These waveguides are based on the so-called ion-exchange glass technology and is know in the photonics industry for quite some time but has never been used in the context of quantum technologies. Efficient light-matter interface is of primordial importance in this system. To achieve this goal, several paths are undertaken such as the use of dielectric and plasmonic structuration in order to increase the light interaction with the waveguide or to develop fabrication techniques to insert the emitters directly inside the guide (for nanodiamonds). We will show what is our current state of the art for placing single emitters at the right place on our optical waveguides made of ion-exchange in glass and in particular what can be done to improve our first promising results in order to get near unity coupling between the optical bus and single photon emitters. We will show first results with semiconductor nanocrystals (NCs) but also using nitrogen-vacancy and silicon-vacancy defects in nanodiamond. The very first step in of our approach consists in the design of the structured waveguide using electromagnetic FDTD. We demonstrated that it is possible to achieve more than 90% coupling. In practice, before using coloured centres in diamond, we started working with CdSe/ZnS semiconductor nanocrystals. So far, we use straight waveguides defined to be single modes at the nominal wavelength of the emission line of the nanoemitters. The positioning of nanoemitters is still a challenge to be achieved. We developed an original technique based on photopolymerisation of light where the nanocrystals are grafted into a light sensitive polymer and can be placed at adequate positions.