Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Low Noise Optical Buffering Based on Non-Degenerate Phase Sensitive Parametric Amplification

Adonis Bogris

Published Jun 1, 2019• 0 citations
Publisher

Abstract

Optical buffers are devices which can store optical signals for a period of time and could be valuable tools for applications such as optical storage, optical packet switching and all-optical signal processing providing the storage functionality in the optical domain, thus avoiding unwanted opto-electronic and eletro-optical conversions. During the last twenty years, there have been proposed many approaches for the implementation of optical buffers. The most straightforward scheme is the use of a fiber spool playing the role of a long-time optical delay line which requires either direct or indirect amplitude modulation to maintain the bit timing [1]. Other interesting techniques referring to optical buffering are slow-light [2], temporal solitons in optical cavities [3], excitability properties of optical devices [4] and photonic crystal nanocavities [5].

DOI
10.1109/cleoe-eqec.2019.8871858

Related papers

Refreshed Opto-Acoustic Memory

Birgit Stiller, Moritz Merklein, Khu T. Vu +3 more

Storing and delaying optical information is of crucial importance for optical communications, signal processing and in the quantum domain. A plethora of techniques for optical storage have been shown which aim to maintain as much as possible the advantages of optics, such as e.g. the coherence, the bandwidth and capacity. In particular the interaction of optical waves with mechanical motion offers a solution to buffer optical information [1-4]. It was shown that one can use acoustic waves to store and delay optical signals coherently via the effect of stimulated Brillouin scattering (SBS) [3,4]. This allows for simultaneous storage at multiple wavelengths [5], cascaded storage at different spatial positions [6], and nonreciprocal storage with a GHz bandwidth [7]. However, the delay time of this technique is so far limited to the acoustic lifetime of about 10 ns.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•0 citations

All-optical storage of a picosecond-pulse packet using parametric amplification: phase-insensitive loading

Glenn D. Bartolini, Darwin K. Serkland, Prem Kumar

Optical storage buffers are an essential component of high-speed TDM optical networks. Sueli devices will be required to store packets with lengths on the order of 10 kbits and storage times approaching hundreds of microseconds.1

•Jul 27, 2006•1 citation

Dynamic All Optical Slow Light Tunability by Using Nonlinear One Dimensional Coupled Cavity Waveguides

Alireza Bananej, S. Morteza, S. M. +2 more

Light propagation at slow speed, delaying light, has a tremendous role in a wide range of advanced technology from peta-bit optical networks to even laser fusion technology [1,2]. Recently, it was realized that delaying of an optical signal is useful for a number of applications such as optical buffering, signal processing, optical sensing and enhancement of optical nonlinearity in materials [3]. Also, as a consequence of important role of fiber lasers in laser fusion technology, coherent beam combining of several fiber lasers for achieving high power output is a crucial problem in future fusion technology. This task can be overcome by using proper engineered photonic components for achieving specific group delay time [2].

InTech eBooks•Mar 30, 2012•0 citations

All-optical erasable storage buffer based on parametric nonlinearity in fiber

Anjali Agarwal, Lijun Wang, Yikai Su +1 more

We present an erasable all-optical buffer based on parametric gain and cross-phase modulation loading. The buffer is erased by employing a loop-mirror as a switch. We demonstrate storage of 1Gb/s packets for 1ms.

Optical Fiber Communication Conference•Jan 1, 2001•4 citations

Tunable storage of optical data packets modulated in spectrally efficient formats

Thomas Schneider

An all-optical telecommunications network requires all-optical routers. These routers would be able to process optical signals directly, without the transformation to the electrical domain. Thus, optical routers have the potential to accelerate telecommunications, i.e. to enhance the data rate and to minimize the latency times. Furthermore, since the double transformation at each network node can be omitted, they could be able to reduce the energy consumption of telecommunications. Key elements of optical routers are optical buffers, which are able to store the optical packets prior to processing in order to avoid congestion. Therefore, many different concepts for the realization of optical buffers have been presented so far. Most of these can just store or delay on-off keyed (OOK) signals. However, in optical telecommunications advanced modulation formats will be increasingly used because they are able to improve the transmission properties and to take advantage of the capacity of optical fibers. Thus, advanced modulation formats can drastically increase the transmissible data rates. Most of these advanced formats modulate the carrier’s phase or are a combination of amplitude and phase modulation. Here the storage of amplitude and phase modulated data packets with the so called quasi-light-storage (QLS) method will be shown. The QLS relies on the time-bandwidth coherence of each signal. Thus, as long as the sampling theorem in the frequency domain is not violated, a distortion-free storage of optical data packets with a delay-bandwidth product (DBP) of several thousand bits is possible. Here we will discuss the applicability of the QLS method to advanced modulation formats and we show experimental results of the tunable alloptical storage of OOK modulated signals with a DBP of 160 bit and the storage of phase shift keyed signals with a DBP of 60 bits.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 6, 2013•0 citations

Phase-Sensitive Amplification in Optical Fibers

Michael Vasilyev

We describe the progress in fiber-based phase-sensitive parametric amplifiers in both frequency-degenerate and frequency-nondegenerate configurations. We discuss their applications for phase regeneration, as well as for lumped and distributed noiseless amplification.

Frontiers in Optics•Jan 1, 2005•4 citations
Optical buffers are devices which can store optical signals for a period of time and could be valuable tools for applications such as optical storage, optical packet switching and all-optical signal processing providing the storage functionality in the optical domain, thus avoiding unwanted opto-electronic and eletro-optical conversions. During the last twenty years, there have been proposed many approaches for the implementation of optical buffers. The most straightforward scheme is the use of a fiber spool playing the role of a long-time optical delay line which requires either direct or indirect amplitude modulation to maintain the bit timing [1]. Other interesting techniques referring to optical buffering are slow-light [2], temporal solitons in optical cavities [3], excitability properties of optical devices [4] and photonic crystal nanocavities [5].
Storing and delaying optical information is of crucial importance for optical communications, signal processing and in the quantum domain. A plethora of techniques for optical storage have been shown which aim to maintain as much as possible the advantages of optics, such as e.g. the coherence, the bandwidth and capacity. In particular the interaction of optical waves with mechanical motion offers a solution to buffer optical information [1-4]. It was shown that one can use acoustic waves to store and delay optical signals coherently via the effect of stimulated Brillouin scattering (SBS) [3,4]. This allows for simultaneous storage at multiple wavelengths [5], cascaded storage at different spatial positions [6], and nonreciprocal storage with a GHz bandwidth [7]. However, the delay time of this technique is so far limited to the acoustic lifetime of about 10 ns.
Light propagation at slow speed, delaying light, has a tremendous role in a wide range of advanced technology from peta-bit optical networks to even laser fusion technology [1,2]. Recently, it was realized that delaying of an optical signal is useful for a number of applications such as optical buffering, signal processing, optical sensing and enhancement of optical nonlinearity in materials [3]. Also, as a consequence of important role of fiber lasers in laser fusion technology, coherent beam combining of several fiber lasers for achieving high power output is a crucial problem in future fusion technology. This task can be overcome by using proper engineered photonic components for achieving specific group delay time [2].
An all-optical telecommunications network requires all-optical routers. These routers would be able to process optical signals directly, without the transformation to the electrical domain. Thus, optical routers have the potential to accelerate telecommunications, i.e. to enhance the data rate and to minimize the latency times. Furthermore, since the double transformation at each network node can be omitted, they could be able to reduce the energy consumption of telecommunications. Key elements of optical routers are optical buffers, which are able to store the optical packets prior to processing in order to avoid congestion. Therefore, many different concepts for the realization of optical buffers have been presented so far. Most of these can just store or delay on-off keyed (OOK) signals. However, in optical telecommunications advanced modulation formats will be increasingly used because they are able to improve the transmission properties and to take advantage of the capacity of optical fibers. Thus, advanced modulation formats can drastically increase the transmissible data rates. Most of these advanced formats modulate the carrier’s phase or are a combination of amplitude and phase modulation. Here the storage of amplitude and phase modulated data packets with the so called quasi-light-storage (QLS) method will be shown. The QLS relies on the time-bandwidth coherence of each signal. Thus, as long as the sampling theorem in the frequency domain is not violated, a distortion-free storage of optical data packets with a delay-bandwidth product (DBP) of several thousand bits is possible. Here we will discuss the applicability of the QLS method to advanced modulation formats and we show experimental results of the tunable alloptical storage of OOK modulated signals with a DBP of 160 bit and the storage of phase shift keyed signals with a DBP of 60 bits.