Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

InTech eBooks

Dynamic All Optical Slow Light Tunability by Using Nonlinear One Dimensional Coupled Cavity Waveguides

Alireza Bananej, S. Morteza, S. M., Amir Hassanpour, Sahar Vanessa Amiri

Published Mar 30, 2012• 0 citations
Publisher

Abstract

Light propagation at slow speed, delaying light, has a tremendous role in a wide range of advanced technology from peta-bit optical networks to even laser fusion technology [1,2]. Recently, it was realized that delaying of an optical signal is useful for a number of applications such as optical buffering, signal processing, optical sensing and enhancement of optical nonlinearity in materials [3]. Also, as a consequence of important role of fiber lasers in laser fusion technology, coherent beam combining of several fiber lasers for achieving high power output is a crucial problem in future fusion technology. This task can be overcome by using proper engineered photonic components for achieving specific group delay time [2].

DOI
10.5772/32633

Related papers

Slow and Fast Light

Robert W. Boyd, Zhimin Shi

The pursuit of understanding the propagation of light has fascinated generations of scientists as well as the general public. In the last decade, scientists have explored a vast amount of various approaches to achieve slow light, which typically fall into one of the two general categories: material slow light and structural slow light. One of the most promising applications that use slow and fast light is optical tunable delay lines. The most dominantly used media to carry optical signals is optical fiber. Besides the optical fiber, photonic integrated circuits (PICs) are playing more and more important rule in communication and signal processing. Light detection and ranging (LIDAR) is employed in a wide variety of remote sensing applications, such as measuring atmospheric properties, detecting chemical and biological agents, vehicle surveillance, and aerial/bathymetric surveying.

Photonics•Jan 16, 2015•230 citations

Control of light speed in photonic crystal waveguide devices

Toshihiko Baba, Jun Adachi, Norihiro Ishikura +2 more

Optical buffering and nonlinear enhancement is demonstrated using slow light in photonic crystal waveguide devices. Nearly 350 ps delay and tunability are obtained in a narrowband device, while 22 bit tunability in a wideband device.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Aug 1, 2009•0 citations

Slow and Fast Light in Semiconductor Quantum-Well and Quantum-Dot Devices

Connie J. Chang-Hasnain, Shun Lien Chuang

The ability to manipulate the speed of light has recently become one of the most exciting emergent topics in optics. There are several experimental demonstrations showing the capability to slow down light more than six orders of magnitude in a variety of media, ranging from atomic vapor, solid state crystal, to semiconductors. These results have led to intensive research into new materials, devices, and system studies that examine their impact to new applications. It is believed that we are on the verge of a dramatic change in the way we envision and construct communication, processing and control systems. One direct application of slow and fast light devices is in the area of communications. One grand challenge remaining in information technology today is to store and buffer optical signals directly in optical format. As such, optical signals must be converted to electronic signals to route, switch, or be processed. This resulted in significant latencies and traffic congestions in current networks. In addition, keeping the data in optical domain during the routing process can greatly reduce the power, complexity and size of the routers. To this end, a controllable optical delay line can effectively function as an optical buffer, and the storage is proportional to the variability of the group velocity. In addition to optical buffers, slow and fast light devices can be used as tunable true-time delay elements in microwave photonics, which are important for remotely controlling phased array antenna. Other novel applications include nonlinear optics, optical signal processing, and quantum information processing. There are various approaches that can be used to vary the optical group velocity. Ultraslow or fast group velocity may result from a large material dispersion, waveguide dispersion, or both. In this paper, the authors provide a review of recent progress of slow and fast light using semiconductor devices. Specifically, they will discuss results obtained using semiconductor quantum-well/quantum-dot absorber and optical amplifiers. Slow and fast light are controllable electrically by changing the bias current or voltage as well as optically by changing the pump laser intensity and wavelength. Delay-bandwidth tradeoff and other figures of merits are analyzed

Journal of Lightwave Technology•Dec 1, 2006•132 citations

Slow Light Devices and Their Applications to Microwaves and Photonics

Marco Santagiustina, G. Eisenstein, Luc Thévenaz +8 more

Recently developed, highly effective technologies enabling slow light propagation as a tunable feature in photonic devices, are reviewed. Several applications in ICT are also demonstrated. Controlling the group velocity of light offers a broadband solution to a necessary functionality in microwave and millimeter wave systems: a tunable time-delay/phase-shift line. Moreover, slow light can highly enhance the nonlinearity, thus opening the way to on chip, nonlinear photonics.

•Feb 1, 2012•21 citations

Optical Processing with Slow Wave Structures: Properties and Applications

Andrea Ivano Melloni, Francesco Morichetti, Filippo Persia +3 more

The possibility of dynamically controlling the speed of light can be extremely useful in all the optical applications where a variable delay is needed, such as bit and frame synchronization and optical storage. To this aim, coupled resonator slow-wave structures (SWSs) represent a promising approach to slow down the propagation of optical signals with as large bandwidths as required by optical communication systems. We show that by suitably setting the rings' resonances, SWSs can act efficiently as tunable delay lines, with the overall time delay being continuously adjustable from zero to a maximum value, typically limited by the effects of loss and dispersion. Every ring of the structure can be used as an optical gate and optical pulses can also be trapped and released by the SWS, so as to realize an optical memory or buffer. A time delay of 300 ps and a slowing ratio of 7.5 over a 3.3 GHz bandwidth are experimentally demonstrated in SWSs realized in silicon oxynitride technology

International Conference on Transparent Optical Networks•Jun 1, 2006•2 citations

Physical Nature of “Slow Light” in Stimulated Brillouin Scattering

I. Valeri, Gregory Robert, E. Nadezhda

Frontiers in Guided Wave Optics and Optoelectronics 84 absorption is much too high to render the group effect useful.An exciting breakthrough happened in the early nineties when it was shown that group velocities of few tens of meters per second were possible with nonlinear resonance interactions (Hau et al., 1999).Two important features of nonlinear resonances make this possible: substantially reduced absorption, or even amplification, of radiation at a resonance, and sharpness of such resonances; the sharper a resonance, the higher dn/dω and so the stronger the enhancement of group index, and hence the greater the pulse is delayed.Widely ranging applications for slow light have been proposed, of which those for telecommunication systems and devices (optical delay lines, optical buffers, optical equalizers and signal processors) are currently of most interest (Gauthier, 2005).The essential demand of such devices is compatibility with existing telecommunication systems, that is they must be of wide enough bandwidth (≥10 GHz) and able to be integrated seamlessly into such systems.Of the various nonlinear resonance mechanisms and media, which allow sufficiently long induced delays, stimulated Brillouin and Raman scattering (SBS and SRS) in optical fiber are deemed to be among the best candidates.Currently SBS is the most actively investigated and many experimental and theoretical papers on pulse delaying via SBS in optical fiber have been published in the last few years, see the review paper (Thevenaz, 2008) and references therein.In this process the pulse to be delayed is a frequency down-shifted (Stokes) pulse.This is transmitted through an optical fiber through which continuous wave (CW) pump radiation is sent in the opposite direction to prime the delay process.It is supposed that the Stokes pulse is amplified by parametric coupling with the pump wave and a material (acoustic) wave in the medium (Kroll, 1965), and the amplification is characterised by a resonant-type gain profile.The dispersion of refractive index associated with this profile (which is similar to that in Fig. 1) can then be used to increase the group index for optical pulses at the Stokes frequency (Zeldovich, 1972).Along with obvious device compatibility, there are several other advantages of the SL via SBS approach for optical communications systems: slow-light resonance can be created at any wavelength by changing the pump wavelength; use of optical fibre allows for long interaction lengths and thus low powers for the pump radiation, the process runs at room temperature, it uses off the shelf telecom equipment, and SBS works in the entire transparency range of fibers and in all types of fiber.Currently a main obstacle to applications of this approach is the narrow SBS gain spectral bandwidth, (Thevenaz, 2008), which is typically ≈ 120-200 MHz in silica fiber in the spectral range of telecom optical radiation (~1.3-1.6 μm) (Agrawal, 2006).This chapter reviews our ongoing work on the physical mechanisms that give rise to pulse delay in SBS.In section 2 the theoretical background of the SBS phenomenon is given and the main working equations describing this nonlinear interaction are presented.In section 3 ways by which the SBS spectral bandwidth may be increased are addressed.Waveguide induced spectral broadening of SBS in optical fibre is considered as a means of increasing the bandwidth to the multi-GHz range.An alternative way widely discussed in the literature, (Thevenaz, 2008), is based on spectral broadening of the pump radiation.However it is shown through analytic analysis of the SBS equations converted to the frequency domain that pump radiation broadening by any reasonable amount has only a negligible effect on increasing the SBS bandwidth.Importantly in this section we show that, irrespective of the nature of the broadening considered, the SBS gain bandwidth remains www.intechopen.

InTech eBooks•Feb 1, 2010•0 citations
Light propagation at slow speed, delaying light, has a tremendous role in a wide range of advanced technology from peta-bit optical networks to even laser fusion technology [1,2]. Recently, it was realized that delaying of an optical signal is useful for a number of applications such as optical buffering, signal processing, optical sensing and enhancement of optical nonlinearity in materials [3]. Also, as a consequence of important role of fiber lasers in laser fusion technology, coherent beam combining of several fiber lasers for achieving high power output is a crucial problem in future fusion technology. This task can be overcome by using proper engineered photonic components for achieving specific group delay time [2].
The pursuit of understanding the propagation of light has fascinated generations of scientists as well as the general public. In the last decade, scientists have explored a vast amount of various approaches to achieve slow light, which typically fall into one of the two general categories: material slow light and structural slow light. One of the most promising applications that use slow and fast light is optical tunable delay lines. The most dominantly used media to carry optical signals is optical fiber. Besides the optical fiber, photonic integrated circuits (PICs) are playing more and more important rule in communication and signal processing. Light detection and ranging (LIDAR) is employed in a wide variety of remote sensing applications, such as measuring atmospheric properties, detecting chemical and biological agents, vehicle surveillance, and aerial/bathymetric surveying.
The ability to manipulate the speed of light has recently become one of the most exciting emergent topics in optics. There are several experimental demonstrations showing the capability to slow down light more than six orders of magnitude in a variety of media, ranging from atomic vapor, solid state crystal, to semiconductors. These results have led to intensive research into new materials, devices, and system studies that examine their impact to new applications. It is believed that we are on the verge of a dramatic change in the way we envision and construct communication, processing and control systems. One direct application of slow and fast light devices is in the area of communications. One grand challenge remaining in information technology today is to store and buffer optical signals directly in optical format. As such, optical signals must be converted to electronic signals to route, switch, or be processed. This resulted in significant latencies and traffic congestions in current networks. In addition, keeping the data in optical domain during the routing process can greatly reduce the power, complexity and size of the routers. To this end, a controllable optical delay line can effectively function as an optical buffer, and the storage is proportional to the variability of the group velocity. In addition to optical buffers, slow and fast light devices can be used as tunable true-time delay elements in microwave photonics, which are important for remotely controlling phased array antenna. Other novel applications include nonlinear optics, optical signal processing, and quantum information processing. There are various approaches that can be used to vary the optical group velocity. Ultraslow or fast group velocity may result from a large material dispersion, waveguide dispersion, or both. In this paper, the authors provide a review of recent progress of slow and fast light using semiconductor devices. Specifically, they will discuss results obtained using semiconductor quantum-well/quantum-dot absorber and optical amplifiers. Slow and fast light are controllable electrically by changing the bias current or voltage as well as optically by changing the pump laser intensity and wavelength. Delay-bandwidth tradeoff and other figures of merits are analyzed
The possibility of dynamically controlling the speed of light can be extremely useful in all the optical applications where a variable delay is needed, such as bit and frame synchronization and optical storage. To this aim, coupled resonator slow-wave structures (SWSs) represent a promising approach to slow down the propagation of optical signals with as large bandwidths as required by optical communication systems. We show that by suitably setting the rings' resonances, SWSs can act efficiently as tunable delay lines, with the overall time delay being continuously adjustable from zero to a maximum value, typically limited by the effects of loss and dispersion. Every ring of the structure can be used as an optical gate and optical pulses can also be trapped and released by the SWS, so as to realize an optical memory or buffer. A time delay of 300 ps and a slowing ratio of 7.5 over a 3.3 GHz bandwidth are experimentally demonstrated in SWSs realized in silicon oxynitride technology
Frontiers in Guided Wave Optics and Optoelectronics 84 absorption is much too high to render the group effect useful.An exciting breakthrough happened in the early nineties when it was shown that group velocities of few tens of meters per second were possible with nonlinear resonance interactions (Hau et al., 1999).Two important features of nonlinear resonances make this possible: substantially reduced absorption, or even amplification, of radiation at a resonance, and sharpness of such resonances; the sharper a resonance, the higher dn/dω and so the stronger the enhancement of group index, and hence the greater the pulse is delayed.Widely ranging applications for slow light have been proposed, of which those for telecommunication systems and devices (optical delay lines, optical buffers, optical equalizers and signal processors) are currently of most interest (Gauthier, 2005).The essential demand of such devices is compatibility with existing telecommunication systems, that is they must be of wide enough bandwidth (≥10 GHz) and able to be integrated seamlessly into such systems.Of the various nonlinear resonance mechanisms and media, which allow sufficiently long induced delays, stimulated Brillouin and Raman scattering (SBS and SRS) in optical fiber are deemed to be among the best candidates.Currently SBS is the most actively investigated and many experimental and theoretical papers on pulse delaying via SBS in optical fiber have been published in the last few years, see the review paper (Thevenaz, 2008) and references therein.In this process the pulse to be delayed is a frequency down-shifted (Stokes) pulse.This is transmitted through an optical fiber through which continuous wave (CW) pump radiation is sent in the opposite direction to prime the delay process.It is supposed that the Stokes pulse is amplified by parametric coupling with the pump wave and a material (acoustic) wave in the medium (Kroll, 1965), and the amplification is characterised by a resonant-type gain profile.The dispersion of refractive index associated with this profile (which is similar to that in Fig. 1) can then be used to increase the group index for optical pulses at the Stokes frequency (Zeldovich, 1972).Along with obvious device compatibility, there are several other advantages of the SL via SBS approach for optical communications systems: slow-light resonance can be created at any wavelength by changing the pump wavelength; use of optical fibre allows for long interaction lengths and thus low powers for the pump radiation, the process runs at room temperature, it uses off the shelf telecom equipment, and SBS works in the entire transparency range of fibers and in all types of fiber.Currently a main obstacle to applications of this approach is the narrow SBS gain spectral bandwidth, (Thevenaz, 2008), which is typically ≈ 120-200 MHz in silica fiber in the spectral range of telecom optical radiation (~1.3-1.6 μm) (Agrawal, 2006).This chapter reviews our ongoing work on the physical mechanisms that give rise to pulse delay in SBS.In section 2 the theoretical background of the SBS phenomenon is given and the main working equations describing this nonlinear interaction are presented.In section 3 ways by which the SBS spectral bandwidth may be increased are addressed.Waveguide induced spectral broadening of SBS in optical fibre is considered as a means of increasing the bandwidth to the multi-GHz range.An alternative way widely discussed in the literature, (Thevenaz, 2008), is based on spectral broadening of the pump radiation.However it is shown through analytic analysis of the SBS equations converted to the frequency domain that pump radiation broadening by any reasonable amount has only a negligible effect on increasing the SBS bandwidth.Importantly in this section we show that, irrespective of the nature of the broadening considered, the SBS gain bandwidth remains www.intechopen.