Optical storage buffers are an essential component of high-speed TDM optical networks. Sueli devices will be required to store packets with lengths on the order of 10 kbits and storage times approaching hundreds of microseconds.1
We demonstrate all-optical storage of a picosecond-pulse packet of ones and zeros in a fiber buffer in which loss is compensated by parametric amplification. An all-fiber phase-sensitive parametric amplifier, which exploits a nonlinear Sagnac loop made of standard polarization-maintaining fiber to provide gain, regenerates the stored pulses on each round-trip. Storage for periods of time tip to 1 ms has been observed. Data packets of 10's of kilobits could be stored in this device with use of a higher repetition-rate pump source.
Optical buffers are devices which can store optical signals for a period of time and could be valuable tools for applications such as optical storage, optical packet switching and all-optical signal processing providing the storage functionality in the optical domain, thus avoiding unwanted opto-electronic and eletro-optical conversions. During the last twenty years, there have been proposed many approaches for the implementation of optical buffers. The most straightforward scheme is the use of a fiber spool playing the role of a long-time optical delay line which requires either direct or indirect amplitude modulation to maintain the bit timing [1]. Other interesting techniques referring to optical buffering are slow-light [2], temporal solitons in optical cavities [3], excitability properties of optical devices [4] and photonic crystal nanocavities [5].
We present a loadable and erasable all-optical fiber storage buffer based on parametric gain and cross-phase modulation (XPM) loading. The gain is provided by a phase-sensitive amplifier (PSA), implemented as a Sagnac interferometer, and relies on the nonlinear interaction within standard dispersion-shifted fiber. PSAs inherently have the property of stabilizing ones and zeros and thus eliminate the need to use optical filters within the buffer, or the need for any other kind of intensity discriminator. The action of the PSA is then twofold. It provides the gain and also achieves bistability of the buffer, which gives it an advantage over a linear amplifier such as erbium-doped fiber amplifier for our experimental configuration. External data are written into the buffer using wavelength-induced XPM. This method is insensitive to the optical phase of the incoming data and thus does not require tracking of its phase. The buffer is erased by employing a nonlinear optical loop mirror as a switch. We demonstrate storage of picosecond pulse packets at bit rates of 1 Gb/s for periods of time up to 1 ms.