Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)

Strontium Optical Atomic Clocks in KL FAMO Blue Detuned Lattice for Strontium Atoms and Project of a Continuous Active Optical Clock with Cold Strontium Atoms

Marcin Bober, Piotr Ablewski, Sławomir Bilicki, J. Borkowski, Muhammad Ali Butt, D. Dziczek, Anahit L. Gogyan, Mateusz Narożnik, V. Singh, A. Tonoyan, Anahit L. Gogyan, Marcin Witkowski, M. Zawada

Published Apr 1, 2019• 0 citations
Publisher

Abstract

We would like to report on a design of new type of optical atomic clock - a continuous active clock with cold strontium atoms, as well as on progress with lattice clocks in KL FAMO. The active clock design will use blue detuned optical lattice to provide the Lamb-Dicke regime in the optical cavity, where conditions for superradiance emission on the clock transition will be meet. Studies of the blue detuned magic wavelength for88Sr will be presented together with possibility to create a state dependence, blue detuned optical lattice.

DOI
10.1109/fcs.2019.8856092

Related papers

Towards a Continuous Active Optical Atomic Clock With Cold Strontium Atoms

Marcin Bober, Sławomir Bilicki, Anahit L. Gogyan +7 more

We present a setup designed for an active optical atomic clock operating at the clock transition (1S0-3P0) with cold strontium atoms. The apparatus is designed for continuous operation, and it is designed for both 87Sr and 88Sr isotopes.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 7, 2021•0 citations

Towards a strontium based stationary optical lattice clock

Qasim Hassan Ubaid

Optical atomic clocks have proven to be the most stable clocks with the lowest systematic uncertainty which has now reached a record level of (9.4 X10/(^{19}/)). Thus optical clocks now surpass the best fountain Cs atomic clocks by three orders of magnitude which opens the prospect of using optical clocks as frequency standards for timekeeping in the near future. \n \nThis thesis describes the progress that has been made towards a stationary optical lattice clock based on strontium atoms, and reports the results of an ongoing characterization. \n \nAn experimental apparatus was designed and built to efficiently slow, cool, and trap the strontium atoms which represent the heart of the strontium optical lattice clock discussed in this thesis. The novel aspects of the experimental development described in the thesis comprise a frequency doubling cavity for producing 461 nm laser light employed for cooling and trapping the strontium atoms in the first stage cooling. This cavity provided sufficient power for cooling and trapping the strontium atoms for up to 300 mW of 461 nm laser light. Furthermore, a new design of Zeeman slower based on spherical permanent magnets was produced, built and characterized. \n \nThe slower is compact, tunable, easy to assemble and maintain, and cost-effective as the permanent magnets do not require any power supply or water cooling. It is suggested that this kind of Zeeman slower constitutes an ideal solution for portable optical clock systems. A blue magneto-optical trap was realized for the first time with such a Zeeman slower. With about 30 mW of a 461 nm laser, up to 6X10/(^8/) atoms were captured.

•Jul 20, 2020•0 citations

Towards miniaturized strontium optical lattice clock

Wei He

Optical atomic clocks with precisions and accuracies in the \n10\\(^-\\)\\(^1\\)\\(^8\\) level [1] are now the most advanced man-made timekeeping devices. They outperform the microwave cesium atomic clocks that realize the SI definition of the second. Scaling down the size of optical atomic clocks may open the door to a range of industrial and space applications. \n \nIn this thesis, the design and preliminary results of a compact strontium cooling system are presented. In the first cooling stage, the high power 461 nm laser with 300 mW output features a modular design, while smaller laser sources for demonstrating a strontium magneto-optical trap have also been investigated. An innovative design that couples a spectroscopy cell directly into the scientific chamber reduces the overall size and power consumption of the system. Additionally, using strontium oxide as a source of strontium atoms suitable for optical clocks has achieved initial success. For the first time, a single-beam MOT configuration is applied to strontium. In this novel apparatus, the blue MOT and red MOT broadband cooling phases are able to trap 5x10\\(^6\\) and 1000 atoms, respectively. This work shows promising progress towards developing a functional miniaturized strontium optical lattice clock.

•Jul 1, 2017•5 citations

Optical atomic clocks on all-optical atom chips

Yuri B. Ovchinnikov

The feasibility and potential performance of optical clocks based on all-optical atom chips using neutral strontium atoms have been investigated. The key benefits of all-optical atom chips are their ability to trap alkali-earth atoms, and how easily these atoms can be manipulated and examined. The planar configuration of the chip enables ring photonic resonators to be incorporated into its structure, making it a promising candidate for active optical atomic clocks. Using the 'magic wavelengths' of the trapping optical fields (813 nm and 390 nm for strontium atoms) minimises frequency shifts in the intercombination clock transition caused by variations in optical field intensity. However, this frequency shift can be compensated for using optical AC Stark shifts, which are generated by the trapping optical fields and have frequencies below the 'magic frequencies'. Furthermore, it has been demonstrated that atom chip clocks can operate using solely repulsive, blue-detuned evanescent light fields when the attraction of the trapped atoms towards the photonic waveguide is realised through van der Waals forces alone. According to estimates, this could result in the short-term fractional frequency stability of the strontium atom-chip optical clocks being limited to ~10^{-16} per second, with an accuracy of about 5 x 10^{-15} for fractional intensity stability in the trapping light fields of 0.001.

arXiv:2610.13701•Oct 9, 2026•0 citations

Open-source electronics ecosystem for optical atomic clocks

Piotr Morzyński, Sławomir Bilicki, Marcin Bober +4 more

Abstract We present an open-source hardware and software ecosystem for optical atomic clocks. We provide PCB schematics and fabrication files for manufacturing the most important electronic systems together with the required software. The boards are designed for an active bad-cavity superradiant strontium clock and a passive optical lattice strontium clock, but they can be easily adapted to other atomic species’ optical atomic clocks or ultra-cold atoms’ systems like magneto-optical traps or Bose–Einstein condensate setups.

Measurement Science and Technology•Mar 20, 2023•2 citations

High Precision Spectroscopy of Strontium in an Optical Lattice: Towards a New Standard for Frequency and Time

Martin M. Boyd

Clocks based on optical transitions in ions and atoms are quickly moving to the forefront of the frequency standards field mainly because of the high spec-tral resolution, and therefore the potential stability and accuracy, which can be achieved. In this thesis a new optical clock based on neutral atoms trapped in an optical lattice is presented, demonstrating spectroscopy of the clock transition free of any lineshape or accuracy degradation due to atomic motion. The system simu-lates a single trapped ion clock, but allows use of thousands of atoms for improved signal to noise ratio, and clock stability. High accuracy can also be achieved as the lattice can be designed to shift the energy of the two atomic clock states equally, such that the transition frequency is unchanged. Strontium is a natural candidate for such a clock as it offers an extremely narrow optical transition (∼1 mHz) based on atomic states which are very insensitive to external fields. The strontium level structure allows efficient laser cooling to 1 µK with diode laser sources, and a con-venient wavelength of 813 nm for the zero-differential Stark shift optical lattice. The strontium lattice clock system has allowed observation of high signal-to-noise

•Jan 1, 2007•39 citations
We would like to report on a design of new type of optical atomic clock - a continuous active clock with cold strontium atoms, as well as on progress with lattice clocks in KL FAMO. The active clock design will use blue detuned optical lattice to provide the Lamb-Dicke regime in the optical cavity, where conditions for superradiance emission on the clock transition will be meet. Studies of the blue detuned magic wavelength for88Sr will be presented together with possibility to create a state dependence, blue detuned optical lattice.
Optical atomic clocks have proven to be the most stable clocks with the lowest systematic uncertainty which has now reached a record level of (9.4 X10/(^{19}/)). Thus optical clocks now surpass the best fountain Cs atomic clocks by three orders of magnitude which opens the prospect of using optical clocks as frequency standards for timekeeping in the near future. \n \nThis thesis describes the progress that has been made towards a stationary optical lattice clock based on strontium atoms, and reports the results of an ongoing characterization. \n \nAn experimental apparatus was designed and built to efficiently slow, cool, and trap the strontium atoms which represent the heart of the strontium optical lattice clock discussed in this thesis. The novel aspects of the experimental development described in the thesis comprise a frequency doubling cavity for producing 461 nm laser light employed for cooling and trapping the strontium atoms in the first stage cooling. This cavity provided sufficient power for cooling and trapping the strontium atoms for up to 300 mW of 461 nm laser light. Furthermore, a new design of Zeeman slower based on spherical permanent magnets was produced, built and characterized. \n \nThe slower is compact, tunable, easy to assemble and maintain, and cost-effective as the permanent magnets do not require any power supply or water cooling. It is suggested that this kind of Zeeman slower constitutes an ideal solution for portable optical clock systems. A blue magneto-optical trap was realized for the first time with such a Zeeman slower. With about 30 mW of a 461 nm laser, up to 6X10/(^8/) atoms were captured.
Optical atomic clocks with precisions and accuracies in the \n10\\(^-\\)\\(^1\\)\\(^8\\) level [1] are now the most advanced man-made timekeeping devices. They outperform the microwave cesium atomic clocks that realize the SI definition of the second. Scaling down the size of optical atomic clocks may open the door to a range of industrial and space applications. \n \nIn this thesis, the design and preliminary results of a compact strontium cooling system are presented. In the first cooling stage, the high power 461 nm laser with 300 mW output features a modular design, while smaller laser sources for demonstrating a strontium magneto-optical trap have also been investigated. An innovative design that couples a spectroscopy cell directly into the scientific chamber reduces the overall size and power consumption of the system. Additionally, using strontium oxide as a source of strontium atoms suitable for optical clocks has achieved initial success. For the first time, a single-beam MOT configuration is applied to strontium. In this novel apparatus, the blue MOT and red MOT broadband cooling phases are able to trap 5x10\\(^6\\) and 1000 atoms, respectively. This work shows promising progress towards developing a functional miniaturized strontium optical lattice clock.
The feasibility and potential performance of optical clocks based on all-optical atom chips using neutral strontium atoms have been investigated. The key benefits of all-optical atom chips are their ability to trap alkali-earth atoms, and how easily these atoms can be manipulated and examined. The planar configuration of the chip enables ring photonic resonators to be incorporated into its structure, making it a promising candidate for active optical atomic clocks. Using the 'magic wavelengths' of the trapping optical fields (813 nm and 390 nm for strontium atoms) minimises frequency shifts in the intercombination clock transition caused by variations in optical field intensity. However, this frequency shift can be compensated for using optical AC Stark shifts, which are generated by the trapping optical fields and have frequencies below the 'magic frequencies'. Furthermore, it has been demonstrated that atom chip clocks can operate using solely repulsive, blue-detuned evanescent light fields when the attraction of the trapped atoms towards the photonic waveguide is realised through van der Waals forces alone. According to estimates, this could result in the short-term fractional frequency stability of the strontium atom-chip optical clocks being limited to ~10^{-16} per second, with an accuracy of about 5 x 10^{-15} for fractional intensity stability in the trapping light fields of 0.001.
Abstract We present an open-source hardware and software ecosystem for optical atomic clocks. We provide PCB schematics and fabrication files for manufacturing the most important electronic systems together with the required software. The boards are designed for an active bad-cavity superradiant strontium clock and a passive optical lattice strontium clock, but they can be easily adapted to other atomic species’ optical atomic clocks or ultra-cold atoms’ systems like magneto-optical traps or Bose–Einstein condensate setups.
Clocks based on optical transitions in ions and atoms are quickly moving to the forefront of the frequency standards field mainly because of the high spec-tral resolution, and therefore the potential stability and accuracy, which can be achieved. In this thesis a new optical clock based on neutral atoms trapped in an optical lattice is presented, demonstrating spectroscopy of the clock transition free of any lineshape or accuracy degradation due to atomic motion. The system simu-lates a single trapped ion clock, but allows use of thousands of atoms for improved signal to noise ratio, and clock stability. High accuracy can also be achieved as the lattice can be designed to shift the energy of the two atomic clock states equally, such that the transition frequency is unchanged. Strontium is a natural candidate for such a clock as it offers an extremely narrow optical transition (∼1 mHz) based on atomic states which are very insensitive to external fields. The strontium level structure allows efficient laser cooling to 1 µK with diode laser sources, and a con-venient wavelength of 813 nm for the zero-differential Stark shift optical lattice. The strontium lattice clock system has allowed observation of high signal-to-noise