Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Globally Asynchronous, Locally Synchronous Clocking and Shared Interconnect for Large-Scale SFQ Systems

Gleb Krylov, Eby G. Friedman

Published May 21, 2019• 25 citations
Publisher

Abstract

A globally asynchronous, locally synchronous clocking scheme for large-scale single flux quantum (SFQ) systems is proposed. In this scheme, the width of each data bus is extended to carry the corresponding clock signal. This signal activates the distribution of the clock signals within the receiving block. Based on this approach for intra-chip interconnect within SFQ systems, a configurable shared bus is also proposed. The data are attached to a tag, and a resulting data packet is sent to the shared bus. This packet is received by each block, but only processed if the tag matches the block identifier. By avoiding expensive comparators and multiplexers, the overhead of the global bus connection is reduced. The proposed approaches exploit the pulse-based nature and ambiguity of clock and data in SFQ technology – the data packet propagating through the interconnect carries a local clock signal.

DOI
10.1109/tasc.2019.2909985

Related papers

Asynchronous circuits and systems in superconducting RSFQ digital technology

Z.J. Deng, Nobuyuki Yoshikawa, J. Tierno +2 more

Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.

IEEE International Symposium on Asynchronous Circuits and Systems (ASYNC)•Nov 27, 2002•7 citations

VLSI complexity single flux quantum systems

Jabbari, Tahereh, Friedman, Eby G.

Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.

•Jan 1, 2023•0 citations

Data-driven self-timed RSFQ digital integrated circuit and system

Z.J. Deng, Nobuyuki Yoshikawa, Stephen R. Whiteley +1 more

A novel asynchronous timing scheme, data-driven self-timing (DDST) is proposed and implemented in Rapid Single-Flux-Quantum (RSFQ) superconductive integrated circuits. In this asynchronous approach, the timing signals are generated from the data and no global clock is needed to drive the RSFQ circuit and system. The essence of the self-timing scheme is to localize the system timing in order to avoid the overhead of global clock distribution, and to minimize the timing uncertainty. The DDST scheme has been applied to the design of a shift register, a demultiplexor, and a self-timed high speed digital test system. In this paper, test results of a 4-bit DDST shift register and a high speed on-chip clock generator will be presented to demonstrate the successful DDST operation of RSFQ integrated circuits at a rate of 20 Gb/s.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•104 citations

Asynchronous Single Flux Quantum Logic Gates Using Self-Clocking

Yuki Yamanashi, Taisei Fujisawa, Zongyuan Li +1 more

We propose an asynchronous single flux quantum (SFQ) logic gate composed of a conventional clocked logic gate and an input signal merger that generates a self-clock for the clocked logic gate. By using this self-clocking, we can design any 0-preserving logic gate, including exclusive OR (XOR). The proposed asynchronous SFQ logic gates have adjustable allowable input skew by varying the delay between the merger and internal clock input for the clocked logic gate. We design and evaluate the asynchronous AND, OR, and XOR gates that have an allowable input skew of approximately 8 ps assuming the use of the 10 kA/cm2Nb fabrication process using the proposed design method. We experimentally confirm the correct operation of the asynchronous SFQ XOR gate. We design a completely asynchronous 4-bit-input carry-lookahead adder (CLA) using the designed asynchronous gates. We found that the circuit area and number of Josephson junctions required to design a 4-bit-input CLA can be reduced by > 50% compared to that of the synchronous concurrent-flow 4-bit-input CLA without deterioration of the throughput.

IEEE Transactions on Applied Superconductivity•Feb 10, 2023•8 citations

A Large-Scale Packet Switch System and 60-Gbps Pulse Arbitration Circuit Operation Using Single Flux Quantum Technology

Shinichi Yorozu, 義男 亀田, Shuichi Tahara

We evaluate the performance of a single flux quantum (SFQ) circuit and discuss its possible system-level application. First, we describe an optical-electrical-SFQ hybrid router system that is divided into three functions: an SFQ packet-routing function, a control function, and an optical transmission function. For the packet-switching core, we have developed a packet-switching architecture based on an internal speedup time-shifted Batcher Banyan approach. Our simulated results show that this architecture should provide good scalability and a low packet-loss rate. Additionally, we have fabricated an asynchronous pulse arbitration circuit. This circuit is a key component in our packet-switching system. The circuit synchronizes two asynchronous incoming signals without any global clock signals. It consists of a clock generator based on a ring oscillator and data latches. By measuring the average output voltage of the Josephson junction, we confirmed the output signal control by the clock at over 60 Gbps throughput.

Japanese Journal of Applied Physics•Apr 1, 2001•0 citations

Distributed Self-Clock: A Suitable Architecture for SFQ Circuits

Jia-Hong Yang, Guang-Ming Tang, Xiangyu Zheng +4 more

In this article, we propose a novel architecture for single-flux-quantum (SFQ) circuits. It is compatible to the existing synchronous and asynchronous timing schemes and reduces the hardware cost for implementing the pipeline blocking and flushing, which are the two methods to improve the performance of SFQ microprocessors. We simulate two crucial elements, and the functions of the elements are verified successfully. The proposed architecture simplifies the logic design of the circuits, and it can be considered as a general architecture for SFQ circuits because of the compelling characteristics.

IEEE Transactions on Applied Superconductivity•Jul 6, 2020•4 citations
A globally asynchronous, locally synchronous clocking scheme for large-scale single flux quantum (SFQ) systems is proposed. In this scheme, the width of each data bus is extended to carry the corresponding clock signal. This signal activates the distribution of the clock signals within the receiving block. Based on this approach for intra-chip interconnect within SFQ systems, a configurable shared bus is also proposed. The data are attached to a tag, and a resulting data packet is sent to the shared bus. This packet is received by each block, but only processed if the tag matches the block identifier. By avoiding expensive comparators and multiplexers, the overhead of the global bus connection is reduced. The proposed approaches exploit the pulse-based nature and ambiguity of clock and data in SFQ technology – the data packet propagating through the interconnect carries a local clock signal.
Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.
Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.
A novel asynchronous timing scheme, data-driven self-timing (DDST) is proposed and implemented in Rapid Single-Flux-Quantum (RSFQ) superconductive integrated circuits. In this asynchronous approach, the timing signals are generated from the data and no global clock is needed to drive the RSFQ circuit and system. The essence of the self-timing scheme is to localize the system timing in order to avoid the overhead of global clock distribution, and to minimize the timing uncertainty. The DDST scheme has been applied to the design of a shift register, a demultiplexor, and a self-timed high speed digital test system. In this paper, test results of a 4-bit DDST shift register and a high speed on-chip clock generator will be presented to demonstrate the successful DDST operation of RSFQ integrated circuits at a rate of 20 Gb/s.
We propose an asynchronous single flux quantum (SFQ) logic gate composed of a conventional clocked logic gate and an input signal merger that generates a self-clock for the clocked logic gate. By using this self-clocking, we can design any 0-preserving logic gate, including exclusive OR (XOR). The proposed asynchronous SFQ logic gates have adjustable allowable input skew by varying the delay between the merger and internal clock input for the clocked logic gate. We design and evaluate the asynchronous AND, OR, and XOR gates that have an allowable input skew of approximately 8 ps assuming the use of the 10 kA/cm2Nb fabrication process using the proposed design method. We experimentally confirm the correct operation of the asynchronous SFQ XOR gate. We design a completely asynchronous 4-bit-input carry-lookahead adder (CLA) using the designed asynchronous gates. We found that the circuit area and number of Josephson junctions required to design a 4-bit-input CLA can be reduced by > 50% compared to that of the synchronous concurrent-flow 4-bit-input CLA without deterioration of the throughput.
We evaluate the performance of a single flux quantum (SFQ) circuit and discuss its possible system-level application. First, we describe an optical-electrical-SFQ hybrid router system that is divided into three functions: an SFQ packet-routing function, a control function, and an optical transmission function. For the packet-switching core, we have developed a packet-switching architecture based on an internal speedup time-shifted Batcher Banyan approach. Our simulated results show that this architecture should provide good scalability and a low packet-loss rate. Additionally, we have fabricated an asynchronous pulse arbitration circuit. This circuit is a key component in our packet-switching system. The circuit synchronizes two asynchronous incoming signals without any global clock signals. It consists of a clock generator based on a ring oscillator and data latches. By measuring the average output voltage of the Josephson junction, we confirmed the output signal control by the clock at over 60 Gbps throughput.
In this article, we propose a novel architecture for single-flux-quantum (SFQ) circuits. It is compatible to the existing synchronous and asynchronous timing schemes and reduces the hardware cost for implementing the pipeline blocking and flushing, which are the two methods to improve the performance of SFQ microprocessors. We simulate two crucial elements, and the functions of the elements are verified successfully. The proposed architecture simplifies the logic design of the circuits, and it can be considered as a general architecture for SFQ circuits because of the compelling characteristics.