This thesis is focused on the production and characterization of diamond films and diamond nanoparticles containing custom colour centres. These defects intentionally created into the diamond lattice are promising candidates for single photon sources, and are becoming more important for quantum information technologies as photons can carry quantum information over long distances. With outstanding properties such as up to 80% of the photons emitted into the zero phonon line (ZPL), single photon count rates up to several Mcps under continuous excitation and a narrow ZPL at room temperature, the SiV centre has recently attracted more attention. Although different approaches for the creation of colour centres have been reported, this thesis details the creation of SiV centres by chemical vapour deposition. Colour centres are created through the incorporation of impurities during diamond growth. While Si doping can easily be achieved due to plasma etching of Si substrates or the incorporation of a Si solid source inside the reactor vacuum chamber, controlling the exact amount of Si present in the gas phase or effectively incorporated is still a handicap. Chapters five and six show comprehensive studies performed towards the creation of diamond nanoparticles with single emitters. Control over the Si content within the gas phase is achieved using silane as gas source. The subsequent milling of the diamond films hosting the SiV centres and their inclusion into a stable solution, will facilitate SiV coupling and incorporation into cavities or emission-enhancer devices.
This thesis is focused on the production and characterization of diamond films and diamond nanoparticles containing custom colour centres. These defects intentionally created into the diamond lattice are promising candidates for single photon sources, and are becoming more important for quantum information technologies as photons can carry quantum information over long distances. With outstanding properties such as up to 80% of the photons emitted into the zero phonon line (ZPL), single photon count rates up to several Mcps under continuous excitation and a narrow ZPL at room temperature, the SiV centre has recently attracted more attention. Although different approaches for the creation of colour centres have been reported, this thesis details the creation of SiV centres by chemical vapour deposition. Colour centres are created through the incorporation of impurities during diamond growth. While Si doping can easily be achieved due to plasma etching of Si substrates or the incorporation of a Si solid source inside the reactor vacuum chamber, controlling the exact amount of Si present in the gas phase or effectively incorporated is still a handicap. Chapters five and six show comprehensive studies performed towards the creation of diamond nanoparticles with single emitters. Control over the Si content within the gas phase is achieved using silane as gas source. The subsequent milling of the diamond films hosting the SiV centres and their inclusion into a stable solution, will facilitate SiV coupling and incorporation into cavities or emission-enhancer devices.
We introduce a process for the fabrication of high-quality, spatially isolated nano-diamonds on iridium via microwave-plasma-assisted chemical vapour deposition (CVD) growth. We perform spectroscopy of single silicon-vacancy (SiV) centres produced during the growth of the nano-diamonds. The colour centres exhibit extraordinary narrow zero-phonon-lines down to 0.7 nm at room temperature. Single photon count rates up to 4.8 Mcps at saturation make these SiV centres the brightest diamond-based single photon sources to date. We measure for the first time the fine structure of a single SiV centre, thus confirming the atomic composition of the investigated colour centres.
To investigate new pathways for numerous quantum technologies it is necessary to efficiently fabricate various interesting materials. Single photon sources that are optically and electrically triggerable are the fundamental building blocks required to push the boundaries of several applications, such as realising secure communication technologies. Accordingly, various platforms are being investigated for generation of single photon emitters (SPEs). Diamond is one platform of great interest, due to its ability to host several photostable, optically active SPE defects that can operate at room temperature. Numerous diamond defects have been studied extensively, including the Nitrogen vacancy (NV), Silicon vacancy (SiV) and, recently, the Germanium vacancy (GeV) colour centres. All were shown to be robust room temperature SPEs. Despite promising reports on quantification and applications of diamond-based defects, the search continues to find an emitter that can excel at most applications. \nAnother important factor for the utility of colour centres is the method of excitation. While optical pumping is common practice, the ability to electrically excite emitters is highly desired for optoelectronic applications. Several reports exist on the fabrication and characterisation of electrical device structures of various materials, including Gallium Nitride, Silicon Carbide, Zinc Oxide and diamond defects. The central part of the thesis delves into the fabrication of high aspect ratio, thin, nanoscale, conductive diamond membranes hosting SiV colour centres, which demonstrate key advantages, such as being easily transferrable to a variety of structures. \nSecondly, I investigate unknown narrowband SPEs in diamond nanocrystals, which are preferable for nanophotonic, quantum communications and bio-imaging applications. The origin of the narrowband emission is determined to be point defects localised at extended morphological defects in individual nanodiamond particles. Furthermore, a highly polarised, narrowband, possessing sub GHz optical linewidths was observed at cryogenic temperatures. \nFinally, I exploit the optimal fluorescent, chemical and biocompatibility properties for multi-colour tagging of CHO-K1 and U937 cell lines using both NV- and, for the first time, SiV diamond colour centres, to investigate their intracellular properties. The non-toxic SiV diamond nanocrystals initially dispersed throughout the cell interior while tagged NV nanocrystals localised close to the nucleus. \nTherefore, this work reports new findings in spectroscopic studies of diamond-based colour centres that can be excited optically and electrically. Furthermore, it provides detailed evidence which forms the building blocks for future investigation into diamond-based devices and SPEs for a wide variety of applications. The results presented in this thesis therefore provide a new and interesting platform for applications using defect based nanophotonics.
Fluorescent emitters in diamond are considered to be a valuable resource for fields such as quantum communication, quantum photonics, and biological imaging. In this paper, we report a wide range of narrow bandwidth ( ~ 1.5 nm) spectral emission lines arising from different color centers at room temperature. The defects were created by chemical vapor deposition of thin diamond films grown on silica substrates seeded with nanoparticles of diamond and nickel. These fluorescent lines also possess single or few centers photon statistics. We correlate the zero-phonon lines, observed using confocal microscopy, with previously identified nickel-related centers which have been observed in high-pressure high-temperature diamond, with a Si/Ni complex and silicon vacancy defects. We compare our findings with recent results demonstrating single-photon emission in diamond associated with nickel-related centers to clarify and summarize previous studies concerning this specific dopant. The great variety of emission lines observed in the synthesized material, mainly associated with nickel-related centers, could be an important resource for applications relying on the presence of several emitters of single photons in the same sample. Moreover, the possibility of mass production of these centers in nanodiamonds in colloidal suspension may provide an important resource for biomarking and microscopy.
A huge variety of optical colour centres can be found in diamond, emitting in its whole wide transparency range. Although several of these centres have been demonstrated as single-photon emitters, none of them meets all of the requirements of an ideal single-photon source. In this view, we discuss the properties of prominent optical centres, such as the nitrogen vacancy, the silicon vacancy or the so-called NE8 centre, as well as recently found centres ascribed to defects containing Ni, Si, Cr and Xe. Besides suitable intrinsic properties, it is necessary for practical applications that optical centres can be created artificially on demand. Of all known methods, only ion implantation allows for the most controlled creation of such defect centres. In this paper, we discuss how nanoscalability, that is, the nanometre placement and the deterministic creation of optical centres, can, could or cannot be achieved by the available ion implantation techniques. A fine analysis of individual optical centres is now possible, thanks to the recently developed subdiffraction optical microscopy methods.
The work in this thesis is embedded in the framework of quantum metrology and explores quantum effects in solid state emitters and optical sensing. Specifically, the thesis comprises studies on silicon vacancy centres in nanodiamonds, phase measurements and cavity optomechanics utilising optical squeezed states, and a theoretical study on quantum amplifiers. Due to its similarity to single atoms, colour centres in diamond are ideal objects for exploring and exploiting quantum effects, because they are comparably easy to produce, probe and maintain. While nitrogen vacancy centres are the most renowned colour centres, we studied the silicon vacancy (SiV−) centre. In bulk diamond it features strong zero-phonon-line emission and, at cryogenic temperatures, a linewidth of hundreds of MHz, but it displays a weak spin coherence in the order of ns. To suppress the relaxation process which limits the coherence time, we utilised SiV− centres in nanodiamond. By means of confocal microscopy and resonant excitation at cryogenic temperatures, we measured linewidths in recently developed nanodiamond which were an order of magnitude smaller compared to previous studies on SiV− nanodiamonds. Furthermore, we identified spectral diffusion as the main hindrance in extending spin coherence times. Overcoming this issue will provide a promising candidate as an emitter for quantum information. Next, the question of how squeezed states of light can improve optical sensing was addressed. For this purpose, a squeezed light source was designed and built from scratch, which achieved a noise suppression of −8 dB at an optical pump power of 40mW. The generated squeezed light was first used to demonstrate how Gaussian states and detection can beat the shot noise limit and Rayleigh criterion in phase measurements simultaneously. Compared to quantum phase measurements based on single photon states, this approach is inherently deterministic. In addition, the applied homodyne detection enables close-to-unity detection efficiencies and thereby outperforms single photon state strategies which rely on comparably inefficient or demanding detection techniques. A second experiment combined squeezed light and feedback control to cool an optomechanical system. This proof-of-principle study is the first reported squeezing enhanced optomechanical cooling experiment. Despite losses of more than 50% (a resulting noise suppression of −2 dB), the mechanical resonator was cooled from room temperature to 130K. This represents a 12% improvement compared to the use of a coherent state protocol. Finally, we theoretically investigated the fundamental properties of quantum amplifiers. Such devices can be used in information and sensing technology to amplify signals to overcome e.g. technical detection limitations. Amplified communication channels were characterised by applying the measure of mutual information I, as it offers strict bounds on the maximum achievable performance, which enabled a fair comparison between different applications scenarios. As a result, we identified two peculiar configurations: A configuration where amplification does not affect I, and a configuration where quantum correlations do not always lead to an enhanced I.
Single-photon sources are a fundamental element for developing quantum technologies, and sources based on colour centres in diamonds are among the most promising candidates. The well-known nitrogen vacancy centres are characterized by several limitations, and thus few other defects have recently been considered. In the present work, we characterize, in detail, native efficient single colour centres emitting in the near infra-red ( λ = 740–780 nm) in both standard IIa single-crystal and electronic-grade polycrystalline commercial chemical vapour deposited (CVD) diamond samples. In the former case, a high-temperature ( T > 1000 °C) annealing process in vacuum is necessary to induce the formation/activation of luminescent centres with good emission properties, while in the latter case the annealing process has marginally beneficial effects on the number and performance of native centres in commercially available samples. Although displaying significant variability in several photo-physical properties (emission wavelength, emission rate instabilities, saturation behaviours), these centres generally display appealing photophysical properties for applications as single photon sources: short lifetimes (0.7–3 ns), high emission rates (∼50–500 × 10 3 photons s −1 ) and strongly (>95%) polarized light. The native centres are tentatively attributed to impurities incorporated in the diamond crystal during the CVD growth of high-quality type-IIa samples, and offer promising perspectives in diamond-based photonics.