We present an optical approach for high-speed parallel random bit generation based on stochastic pulse-to-pulse fluctuation in the supercontinuum (SC). Through spectrally demultiplexing the SC pulse sequence into different wavelength channels, we simultaneously extract multiple independent fast random bit streams from each SC pulse subsequence via associated comparators in parallel. Proof-of-concept experiments demonstrate that using our method, four 10 Gb/s random bit streams are obtained from a SC pulse source with verified randomness. Moreover, this method also provides a promising strategy to fabricate ultrafast random bit generators with Tb/s throughput capacity just by increasing additional wavelength channels.
We present an optical approach for high-speed parallel random bit generation based on stochastic pulse-to-pulse fluctuation in the supercontinuum (SC). Through spectrally demultiplexing the SC pulse sequence into different wavelength channels, we simultaneously extract multiple independent fast random bit streams from each SC pulse subsequence via associated comparators in parallel. Proof-of-concept experiments demonstrate that using our method, four 10 Gb/s random bit streams are obtained from a SC pulse source with verified randomness. Moreover, this method also provides a promising strategy to fabricate ultrafast random bit generators with Tb/s throughput capacity just by increasing additional wavelength channels.
Here we propose a novel complementary concept of all-optical technique that might dramatically increase the generation rate of random bits by using simultaneously multiple spectral channels with uncorrelated signals somewhat similar to use of wave-division-multiplexing in communications. We propose to exploit the intrinsic nonlinear dynamics of extreme spectral broadening and supercontinuum (SC) generation in optical fibre, a process known to be often associated with non-deterministic fluctuations [2]. In this paper, we report proof-of concept results indicating that the fluctuations in highly nonlinear fibre SC generation can potentially be used for random number generation.
Random bit generators are critical for information security, cryptography, stochastic modeling, and simulations. Speed and scalability are key challenges faced by current physical random bit generation. Herein, we propose a massively parallel scheme for ultrafast random bit generation towards rates of order 100 terabit per second based on a single micro-ring resonator. A modulation-instability-driven chaotic comb in a micro-ring resonator enables the simultaneous generation of hundreds of independent and unbiased random bit streams. A proof-of-concept experiment demonstrates that using our method, random bit streams beyond 2 terabit per second can be successfully generated with only 7 comb lines. This bit rate can be easily enhanced by further increasing the number of comb lines used. Our approach provides a chip-scale solution to random bit generation for secure communication and high-performance computation, and offers superhigh speed and large scalability.
We describe an optoelectronic system for simultaneously generating parallel, independent streams of random bits using spectrally separated noise signals obtained from a single optical source. Using a pair of nonoverlapping spectral filters and a fiber-coupled superluminescent LED (SLED), we produced two independent 10 Gb/s random bit streams, for a cumulative generation rate of 20 Gb/s. The system relies principally on chip-based optoelectronic components that could be integrated in a compact, economical package.
To achieve complete security of communication, there is a need for “real-time” ultrafast physical random bit generators (RBGs). In the available physical RBGs, random bit extraction is effected in the electrical domain and, therefore, cannot directly function beyond the frequencies of 10 GHz or so in real time. Here, we present a fully photonic strategy for real-time random number generation and report a proof-of-concept experimental demonstration of an integrated 10 Gb/s RBG system (prototype) based on laser chaos. The use of an ultrastable mode-locked laser, together with ultrafast optical interactions, gives our method the capability to develop super-high-speed RBGs in practice. The photonic implementation is fully compatible with optical communications so that well-established optical multiplexing techniques can be used to realize Tb/s real-time random bit generation.
The exponential growth of data transmission and processing speeds in modern digital infrastructure requires entropy sources capable of producing large volumes of true randomness for information security. Chaotic emissions from semiconductor lasers are attractive in this context because of their fast dynamics and nonrepetitive behavior. Their spectral bandwidth, however, is typically limited to several tens of gigahertz, which constrains the achievable entropy rate and makes ultrafast random bit generation difficult without substantial post-processing. Here, we demonstrate a chaos-based entropy source that employs optical heterodyning between the chaotic emission from a semiconductor laser and an optical frequency comb, yielding a bandwidth exceeding 100 GHz and an experimentally verified single-channel entropy rate of 1.86 Tb/s. By directly extracting multiple bits from the digitized output of the entropy source, we achieve a single-channel random bit generation rate of 1.536 Tb/s, while four-channel parallelization reaches 6.144 Tb/s with no observable interchannel correlation. This linear scalability suggests that aggregate throughput could reach hundreds of terabits per second with additional parallel channels. The broadband, low-overhead photonic architecture presented here provides a viable route to real-time, ultrafast random bit generation with broad implications for secure communications, high-performance AI computing, and large-scale data analytics.
High-speed physical random number generation is essential for secure communication, high-speed encryption and stochastic photonic information processing. However, scaling optical random number generators toward massively parallel operation remains challenging, because multiple wavelength channels generated from a common physical entropy source often suffer from residual correlation and limited spectral scalability. Here, we propose and experimentally demonstrate a dual-output, multi-channel parallel physical true random number generator based on a randomdistributed-feedback Brillouin fiber laser. Cascaded stimulated Brillouin scattering, four-wave mixing, cross-phase modulation and self-phase modulation in a highly nonlinear fiber, together with near-zero-dispersion assisted phase matching provided by a dispersion-shifted fiber, generate broadband Brillouin optical frequency combs spanning approximately 100 nm at both output ports. Distributed Rayleigh backscattering in a long single-mode fiber introduces stochastic phase perturbations and optical path delays, effectively breaking the fixed coherent relationship between output1 and output 2. The two outputs simultaneously exhibit broadbandcomb spectra, withoptical signal-to-noise ratio values of approximately 20 dB observed for the comb lines. The temporalcross-correlation coefficient between the two outputs remains below 0.05, forming two decorrelated optical entropy sources. Using 40 GSa/s sampling, 8-bit quantization, delay-reverse XOR decorrelation, and 4-LSB extraction, eight representative comb-line channels from the two output ports pass the NIST SP 800-22 statistical test suite. Based on the adopted offline post-processing procedure, these channels correspond to an effective aggregate random-bit rate of 1.92 Tb/s. The broadband spectra contain more than 1100 spectrally observable comb lines at each output port, indicating substantial potential for wavelength-parallel scaling. Under anideal fully parallel acquisition and processing architecture, the corresponding theoretical upper-bound aggregate rate could exceed 352 Tb/s (2200 × 4bit × 40GSa/s).