Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Incoherent fibre supercontinuum generation for all-optical random number generation

Benjamin Wetzel, Laurent Larger, Keith J. Blow, Sergei K. Turitsyn, John M. Dudley

Published May 1, 2011• 0 citations
Publisher

Abstract

Here we propose a novel complementary concept of all-optical technique that might dramatically increase the generation rate of random bits by using simultaneously multiple spectral channels with uncorrelated signals somewhat similar to use of wave-division-multiplexing in communications. We propose to exploit the intrinsic nonlinear dynamics of extreme spectral broadening and supercontinuum (SC) generation in optical fibre, a process known to be often associated with non-deterministic fluctuations [2]. In this paper, we report proof-of concept results indicating that the fluctuations in highly nonlinear fibre SC generation can potentially be used for random number generation.

DOI
10.1109/cleoe.2011.5943562

Related papers

Parallel optical random bit generator

Pu Li, Kunying Li, Xiaomin Guo +6 more

We present an optical approach for high-speed parallel random bit generation based on stochastic pulse-to-pulse fluctuation in the supercontinuum (SC). Through spectrally demultiplexing the SC pulse sequence into different wavelength channels, we simultaneously extract multiple independent fast random bit streams from each SC pulse subsequence via associated comparators in parallel. Proof-of-concept experiments demonstrate that using our method, four 10 Gb/s random bit streams are obtained from a SC pulse source with verified randomness. Moreover, this method also provides a promising strategy to fabricate ultrafast random bit generators with Tb/s throughput capacity just by increasing additional wavelength channels.

Optics Letters•May 8, 2019•36 citations

Multiplexed Quantum Random Number Generation

Ben Haylock, Daniel Peace, Francesco Lenzini +2 more

Fast secure random number generation is essential for high-speed encrypted communication, and is the backbone of information security. Generation of truly random numbers depends on the intrinsic randomness of the process used and is usually limited by electronic bandwidth and signal processing data rates. Here we use a multiplexing scheme to create a fast quantum random number generator structurally tailored to encryption for distributed computing, and high bit-rate data transfer. We use vacuum fluctuations measured by seven homodyne detectors as quantum randomness sources, multiplexed using a single integrated optical device. We obtain a real-time random number generation rate of 3.08 Gbit/s, from only 27.5 MHz of sampled detector bandwidth. Furthermore, we take advantage of the multiplexed nature of our system to demonstrate an unseeded strong extractor with a generation rate of 26 Mbit/s.

arXiv:1801.06926•Quantum•May 13, 2019•46 citations

Ultrafast Random Number Generation Based on Random Laser

Juntao Li, Jinbo Liu, Dong Liu +5 more

True random numbers with high security originate from non-deterministic physical processes. Random laser with random feedback arising from multiple elastic scattering in a highly disordered structure is an ideal physical entropy source theoretically. In this work, a secure optical ultrafast random number generator based on random laser spectra was demonstrated. Unlike the usual method of recording laser intensity over time, the random laser spectrum under each pump pulse was recorded and converted into random numbers through post-processing. Approaches in three different dimensions—space, spectrum and time were used to increase the rate of random number generation. The randomness of resulting random bit streams was verified by the NIST statistics tests. Experimental results showed that an instantaneous bit rate of 810 terabits per second with off-line post-processing could be theoretically reached with an ideal experimental condition. This novel technique has big advantages in secure communications and promises to further increase the speed of random number generators to the lever of petabits per second or even higher.

Journal of Lightwave Technology•Mar 13, 2023•19 citations

Fast physical random number generator using amplified spontaneous emission

Caitlin R. S. Williams, Julia Salevan, Xiaowen Li +2 more

We report a 12.5 Gb/s physical random number generator (RNG) that uses high-speed threshold detection of the spectrally-sliced incoherent light produced by a fiber amplifier. The system generates a large-amplitude, easily measured, fluctuating signal with bandwidth that is constrained only by the optical filter and electrical detector used. The underlying physical process (spontaneous emission) is inherently quantum mechanical in origin, and therefore cannot be described deterministically. Unlike competing optical RNG approaches that require photon counting electronics, chaotic laser cavities, or state-of-the-art analog-to-digital converters, the system employs only commonly available telecommunications-grade fiber optic components and can be scaled to higher speeds or multiplexed into parallel channels. The quality of the resulting random bitstream is verified using industry-standard statistical tests.

Optics Express•Oct 26, 2010•232 citations

On multiplexing in physical random number generation, and conserved total entropy content

Frédéric Monet, Raman Kashyap

In the current article, we use a random supercontinuum based on a random Raman distributed feedback laser to investigate the generation of random numbers by spectrally demultiplexing the broad supercontinuum spectrum in parallel channels. By tuning the spectral separation between two independent channels, we test the most typically used statistical tests' abilities to identify the required minimum spectral separation between channels, especially after the use of post-processing steps. Out of all the tests that were investigated, the cross-correlation across channels using the raw data appears to be the most robust. We also demonstrate that the use of post-processing steps, either least significant bits extraction or exclusive-OR operations, hinders the ability of these tests to detect the existing correlations. As such, performing these tests on post-processed data, often reported in literature, is insufficient to properly establish the independence of two parallel channels. We therefore present a methodology, which may be used to confirm the true randomness of parallel random number generation schemes. Finally, we demonstrate that, while tuning a single channel's bandwidth can modify its potential randomness output, it also affects the number of available channels, such that the total random number generation bitrate is conserved.

Scientific Reports•May 16, 2023•4 citations

Massively Parallel Physical Random Number Generation Using a Dual-output Brillouin Random Fiber Laser

Haozhe Li, Fei Wang, Tao Deng +1 more

High-speed physical random number generation is essential for secure communication, high-speed encryption and stochastic photonic information processing. However, scaling optical random number generators toward massively parallel operation remains challenging, because multiple wavelength channels generated from a common physical entropy source often suffer from residual correlation and limited spectral scalability. Here, we propose and experimentally demonstrate a dual-output, multi-channel parallel physical true random number generator based on a randomdistributed-feedback Brillouin fiber laser. Cascaded stimulated Brillouin scattering, four-wave mixing, cross-phase modulation and self-phase modulation in a highly nonlinear fiber, together with near-zero-dispersion assisted phase matching provided by a dispersion-shifted fiber, generate broadband Brillouin optical frequency combs spanning approximately 100 nm at both output ports. Distributed Rayleigh backscattering in a long single-mode fiber introduces stochastic phase perturbations and optical path delays, effectively breaking the fixed coherent relationship between output1 and output 2. The two outputs simultaneously exhibit broadbandcomb spectra, withoptical signal-to-noise ratio values of approximately 20 dB observed for the comb lines. The temporalcross-correlation coefficient between the two outputs remains below 0.05, forming two decorrelated optical entropy sources. Using 40 GSa/s sampling, 8-bit quantization, delay-reverse XOR decorrelation, and 4-LSB extraction, eight representative comb-line channels from the two output ports pass the NIST SP 800-22 statistical test suite. Based on the adopted offline post-processing procedure, these channels correspond to an effective aggregate random-bit rate of 1.92 Tb/s. The broadband spectra contain more than 1100 spectrally observable comb lines at each output port, indicating substantial potential for wavelength-parallel scaling. Under anideal fully parallel acquisition and processing architecture, the corresponding theoretical upper-bound aggregate rate could exceed 352 Tb/s (2200 × 4bit × 40GSa/s).

Journal of Lightwave Technology•Jan 1, 2026•0 citations
Here we propose a novel complementary concept of all-optical technique that might dramatically increase the generation rate of random bits by using simultaneously multiple spectral channels with uncorrelated signals somewhat similar to use of wave-division-multiplexing in communications. We propose to exploit the intrinsic nonlinear dynamics of extreme spectral broadening and supercontinuum (SC) generation in optical fibre, a process known to be often associated with non-deterministic fluctuations [2]. In this paper, we report proof-of concept results indicating that the fluctuations in highly nonlinear fibre SC generation can potentially be used for random number generation.
We present an optical approach for high-speed parallel random bit generation based on stochastic pulse-to-pulse fluctuation in the supercontinuum (SC). Through spectrally demultiplexing the SC pulse sequence into different wavelength channels, we simultaneously extract multiple independent fast random bit streams from each SC pulse subsequence via associated comparators in parallel. Proof-of-concept experiments demonstrate that using our method, four 10 Gb/s random bit streams are obtained from a SC pulse source with verified randomness. Moreover, this method also provides a promising strategy to fabricate ultrafast random bit generators with Tb/s throughput capacity just by increasing additional wavelength channels.
Fast secure random number generation is essential for high-speed encrypted communication, and is the backbone of information security. Generation of truly random numbers depends on the intrinsic randomness of the process used and is usually limited by electronic bandwidth and signal processing data rates. Here we use a multiplexing scheme to create a fast quantum random number generator structurally tailored to encryption for distributed computing, and high bit-rate data transfer. We use vacuum fluctuations measured by seven homodyne detectors as quantum randomness sources, multiplexed using a single integrated optical device. We obtain a real-time random number generation rate of 3.08 Gbit/s, from only 27.5 MHz of sampled detector bandwidth. Furthermore, we take advantage of the multiplexed nature of our system to demonstrate an unseeded strong extractor with a generation rate of 26 Mbit/s.
True random numbers with high security originate from non-deterministic physical processes. Random laser with random feedback arising from multiple elastic scattering in a highly disordered structure is an ideal physical entropy source theoretically. In this work, a secure optical ultrafast random number generator based on random laser spectra was demonstrated. Unlike the usual method of recording laser intensity over time, the random laser spectrum under each pump pulse was recorded and converted into random numbers through post-processing. Approaches in three different dimensions—space, spectrum and time were used to increase the rate of random number generation. The randomness of resulting random bit streams was verified by the NIST statistics tests. Experimental results showed that an instantaneous bit rate of 810 terabits per second with off-line post-processing could be theoretically reached with an ideal experimental condition. This novel technique has big advantages in secure communications and promises to further increase the speed of random number generators to the lever of petabits per second or even higher.
We report a 12.5 Gb/s physical random number generator (RNG) that uses high-speed threshold detection of the spectrally-sliced incoherent light produced by a fiber amplifier. The system generates a large-amplitude, easily measured, fluctuating signal with bandwidth that is constrained only by the optical filter and electrical detector used. The underlying physical process (spontaneous emission) is inherently quantum mechanical in origin, and therefore cannot be described deterministically. Unlike competing optical RNG approaches that require photon counting electronics, chaotic laser cavities, or state-of-the-art analog-to-digital converters, the system employs only commonly available telecommunications-grade fiber optic components and can be scaled to higher speeds or multiplexed into parallel channels. The quality of the resulting random bitstream is verified using industry-standard statistical tests.
In the current article, we use a random supercontinuum based on a random Raman distributed feedback laser to investigate the generation of random numbers by spectrally demultiplexing the broad supercontinuum spectrum in parallel channels. By tuning the spectral separation between two independent channels, we test the most typically used statistical tests' abilities to identify the required minimum spectral separation between channels, especially after the use of post-processing steps. Out of all the tests that were investigated, the cross-correlation across channels using the raw data appears to be the most robust. We also demonstrate that the use of post-processing steps, either least significant bits extraction or exclusive-OR operations, hinders the ability of these tests to detect the existing correlations. As such, performing these tests on post-processed data, often reported in literature, is insufficient to properly establish the independence of two parallel channels. We therefore present a methodology, which may be used to confirm the true randomness of parallel random number generation schemes. Finally, we demonstrate that, while tuning a single channel's bandwidth can modify its potential randomness output, it also affects the number of available channels, such that the total random number generation bitrate is conserved.
High-speed physical random number generation is essential for secure communication, high-speed encryption and stochastic photonic information processing. However, scaling optical random number generators toward massively parallel operation remains challenging, because multiple wavelength channels generated from a common physical entropy source often suffer from residual correlation and limited spectral scalability. Here, we propose and experimentally demonstrate a dual-output, multi-channel parallel physical true random number generator based on a randomdistributed-feedback Brillouin fiber laser. Cascaded stimulated Brillouin scattering, four-wave mixing, cross-phase modulation and self-phase modulation in a highly nonlinear fiber, together with near-zero-dispersion assisted phase matching provided by a dispersion-shifted fiber, generate broadband Brillouin optical frequency combs spanning approximately 100 nm at both output ports. Distributed Rayleigh backscattering in a long single-mode fiber introduces stochastic phase perturbations and optical path delays, effectively breaking the fixed coherent relationship between output1 and output 2. The two outputs simultaneously exhibit broadbandcomb spectra, withoptical signal-to-noise ratio values of approximately 20 dB observed for the comb lines. The temporalcross-correlation coefficient between the two outputs remains below 0.05, forming two decorrelated optical entropy sources. Using 40 GSa/s sampling, 8-bit quantization, delay-reverse XOR decorrelation, and 4-LSB extraction, eight representative comb-line channels from the two output ports pass the NIST SP 800-22 statistical test suite. Based on the adopted offline post-processing procedure, these channels correspond to an effective aggregate random-bit rate of 1.92 Tb/s. The broadband spectra contain more than 1100 spectrally observable comb lines at each output port, indicating substantial potential for wavelength-parallel scaling. Under anideal fully parallel acquisition and processing architecture, the corresponding theoretical upper-bound aggregate rate could exceed 352 Tb/s (2200 × 4bit × 40GSa/s).