Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Effusive Atomic Oven Nozzle Design Using a Microcapillary Array

Ruwan Senaratne, S. Rajagopal, Zachary A. Geiger, Kurt Fujiwara, Vyacheslav Lebedev, David Weld

Published Jul 23, 2014• 1 citation
OpenAlex

Abstract

We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525$^{\circ}$C the collimated atomic beam flux directly after the nozzle is $1.2 \times 10^{14}$ atoms per second with a peak beam intensity greater than $5.0 \times 10^{16}$ atoms per second per steradian. This suggests an oven lifetime of several decades of continuous operation.

Related papers

Effusive atomic oven nozzle design using an aligned microcapillary array

Ruwan Senaratne, S. Rajagopal, Zachary A. Geiger +3 more

We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design, we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525 °C, the collimated atomic beam flux directly after the nozzle is 1.2 × 10(14) atoms/s with a peak beam intensity greater than 5.0 × 10(16) atoms/s/sr. This suggests an oven lifetime of several decades of continuous operation.

arXiv:1407.6391•Review of Scientific Instruments•Feb 1, 2015•48 citations

Robust high-temperature atomic beam source with a microcapillary array

Peter Dotti, Xiao Chai, Jeremy L. Tanlimco +2 more

We present a new design for a directed high-flux, high-temperature atomic vapor source for use in atomic physics experiments conducted under vacuum. An externally heated nozzle made of an array of stainless steel microcapillaries produces a collimated atomic beam. Welded stainless steel construction allows for operation at high source temperatures without exposing delicate ConFlat vacuum flanges to thermal stress, greatly enhancing robustness compared to previously published designs. We report in operando performance measurements of an atomic beam of lithium at various operating temperatures.

arXiv:2502.07228•Review of Scientific Instruments•Jun 1, 2025•0 citations

A high-flux atomic strontium oven with light-driven flux modulation

Kenneth M. Hughes, J. Schelfhout, Charu Mishra +3 more

A high-flux source of strontium atoms is required for cold atom quantum technology applications. We present a re-entrant oven design that avoids the need for any vacuum feed-throughs and has an inherent temperature gradient to guard against clogging of the nozzle. The nozzle is fabricated by micro-machining of fused silica using selective laser etching; this specialised technique is capable of making many thousands of fine microchannels and is suitable for batch production. Operating with only electrical heating, using <20W of electrical power, a total flux of $8(1)\times 10^{14}$ atoms/s is achieved at an oven temperature of 475°C, of which we estimate $1.8(2)\times 10^{13}$ atoms/s could be captured. A heated in-vacuum sapphire window grants optical access directly opposite the oven, and can be cleared of metallization without breaking vacuum. We used this optical access to modulate the flux of the atomic beam by direct illumination of the nozzle and the strontium metal with high-power laser light. Heating by laser light increased the useful flux by a factor of up to 16(3) on a timescale of 40s, and a factor of 2.5(5) on a timescale of 1s. This flux modulation serves to increase the operating lifetime of the oven. We report experimental measurements of the performance of the oven in long-term operation over many months.

arXiv:2603.25567•Mar 26, 2026•2 citations

Atomic oven with rapid thermal response for atom experiments

Weilong Huang, Congjun Zou, Feiyu Dong +3 more

Atomic oven generating controllable atomic beam flux plays a fundamental role in quantum gas experiments. Here, we report a new heater design that can heat up an high temperature atomic oven with fast thermal response. The new heater shows a heating rate improved by 7.65 times comparing to that of the conventional resistive heater while the crucible temperature can heated up to 1200K. With this oven, we generated a collimated ytterbium beam with flux exceeding $10^{14} \text{ atoms/s}$ at 823 K. We believe that our design offers a promising solution for shortening experimental dead time and improve the experiment efficiency in cold atom researches.

physics.atom-phCross-listedarXiv:2607.04393•Jul 7, 2026•0 citations

A compact and efficient strontium oven for laser-cooling experiments

M. Schioppo, N. Poli, M. Prevedelli +4 more

Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0 × 10(13) s(-1) cm(-2) at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.

arXiv:1209.5639•Review of Scientific Instruments•Oct 1, 2012•65 citations

A new design of a compact strontium cold-atom source

Dongyang Xu

A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.

•Jan 1, 2020•0 citations
We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525∘^{\circ}∘C the collimated atomic beam flux directly after the nozzle is 1.2×10141.2 \times 10^{14}1.2×1014 atoms per second with a peak beam intensity greater than 5.0×10165.0 \times 10^{16}5.0×1016 atoms per second per steradian. This suggests an oven lifetime of several decades of continuous operation.
We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design, we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525 °C, the collimated atomic beam flux directly after the nozzle is 1.2 × 10(14) atoms/s with a peak beam intensity greater than 5.0 × 10(16) atoms/s/sr. This suggests an oven lifetime of several decades of continuous operation.
We present a new design for a directed high-flux, high-temperature atomic vapor source for use in atomic physics experiments conducted under vacuum. An externally heated nozzle made of an array of stainless steel microcapillaries produces a collimated atomic beam. Welded stainless steel construction allows for operation at high source temperatures without exposing delicate ConFlat vacuum flanges to thermal stress, greatly enhancing robustness compared to previously published designs. We report in operando performance measurements of an atomic beam of lithium at various operating temperatures.
A high-flux source of strontium atoms is required for cold atom quantum technology applications. We present a re-entrant oven design that avoids the need for any vacuum feed-throughs and has an inherent temperature gradient to guard against clogging of the nozzle. The nozzle is fabricated by micro-machining of fused silica using selective laser etching; this specialised technique is capable of making many thousands of fine microchannels and is suitable for batch production. Operating with only electrical heating, using <20W of electrical power, a total flux of 8(1)×10148(1)\times 10^{14}8(1)×1014 atoms/s is achieved at an oven temperature of 475°C, of which we estimate 1.8(2)×10131.8(2)\times 10^{13}1.8(2)×1013 atoms/s could be captured. A heated in-vacuum sapphire window grants optical access directly opposite the oven, and can be cleared of metallization without breaking vacuum. We used this optical access to modulate the flux of the atomic beam by direct illumination of the nozzle and the strontium metal with high-power laser light. Heating by laser light increased the useful flux by a factor of up to 16(3) on a timescale of 40s, and a factor of 2.5(5) on a timescale of 1s. This flux modulation serves to increase the operating lifetime of the oven. We report experimental measurements of the performance of the oven in long-term operation over many months.
Atomic oven generating controllable atomic beam flux plays a fundamental role in quantum gas experiments. Here, we report a new heater design that can heat up an high temperature atomic oven with fast thermal response. The new heater shows a heating rate improved by 7.65 times comparing to that of the conventional resistive heater while the crucible temperature can heated up to 1200K. With this oven, we generated a collimated ytterbium beam with flux exceeding 1014 atoms/s10^{14} \text{ atoms/s}1014 atoms/s at 823 K. We believe that our design offers a promising solution for shortening experimental dead time and improve the experiment efficiency in cold atom researches.
Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0 × 10(13) s(-1) cm(-2) at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.
A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.