Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Erbium for Optical Modulation and Quantum Computation

Herianto Lim

Published Jan 1, 2017• 0 citations
Publisher

Abstract

Erbium (Er) is a lanthanide element, mainly used in its trivalent ionic form (Er3+), as an active dopant in optical devices, for light amplification or generation. The luminescence of Er3+ lies within the conventional wavelength band, 1530-1565 nm, for fiber-optic communication. The low noise, linear response, and stability of the optical gain provided by the Er3+ luminescence are ideal for applications in photonic systems that operate in the fiber-optic frequency. While much research has been done to understand the Er3+ luminescence in various lasing media, few studies have been conducted to tap the potential of Er for applications other than amplifiers or lasers. This thesis delves into two new areas, namely optical modulation and quantum computation, where the Er3+ luminescence may be able to be applied in a novel way. \n \nBy incorporating Er3+ into a switchable optical material, an optical modulator could potentially be made that is capable of not only switching but also amplifying signal transmission or sustaining the signal intensity from propagation losses. This integrated approach could reduce device footprint and latency for on-chip as well as synchronous applications. Successful integration of Er, however, has never been demonstrated in conventional optical modulators because their reliance on electro-optic effects conflicts with the carrier-sensitive mechanism of the Er3+ luminescence. The compatibility between Er and a recently advocated optical material, namely vanadium dioxide (VO2), is examined in the first part of this thesis. VO2 exhibits a hysteretic, bistable phase transition that is accompanied by a high-contrast optical switching in infrared, including the fiber-optic, wavelength band. The phase transition can be triggered thermally as well as optically. When triggered optically, it can occur in picosecond timescale, making VO2 a promising material for ultrafast optical switching applications. \n \nExperimental characterizations of the Er3+ luminescence and the optical switching were performed on selectively prepared thin-film samples of VO2. The Er3+ luminescence could be observed after the samples were implanted with Er and then annealed between 800*C and 1000*C. The optical switching could also be measured in the implanted and annealed samples as they were thermally heated up and then cooled down past the critical temperature of the phase transition. The Er-implanted samples, however, were found to have broader hysteresis and lower switching contrasts than the pure VO2 samples. It is concluded that although Er-implanted VO2 could probably work as a combined optical switch and amplifier, the poorer switching qualities do not guarantee that a device based on the material could provide better utility than a separated system of optical switches and Er amplifiers. \n \nThe Er3+ luminescence could also be utilized for quantum frequency conversion, for implementation in interconnects that interface superconducting quantum computers to a fiber-optic quantum network. For two superconducting quantum computers to be able to communicate over a fiber-optic quantum network, the frequency of the signals transmitted from either computer needs to be converted into the fiber-optic frequency, and then back into the microwave frequency upon receipt at the other computer. Early proposals suggested that the interconnect be at least comprised of Er3+ ions, a microwave resonator, and an optical resonator. The realization of this system has been attempted recently in basic experiments, but the conversion efficiency was found to be too low. The weak couplings between the Er3+ ions and the two resonators were identified as one of the main reasons for the low conversion efficiency. One way to mitigate the weak coupling in the microwave part is to have a superconducting flux qubit bridge the interaction between the Er3+ ions and the microwave resonator. \n \nThe second part of this thesis presents a theoretical and simulation study of the dynamics of a coupled system consisting of Er3+ ions, a superconducting microwave resonator, an optical resonator, and a superconducting flux qubit. It is shown that quantum information can be exchanged between the Er3+ ions and the microwave resonator with a high fidelity via the qubit coupling, and the exchange process is controllable by changing the frequency of the qubit. The frequency conversion between the microwave and the optical regime is shown to be infeasible to be realized at the limit where the number of optical excitations (n) is much less than the number of ions (N). A high-efficiency frequency down-conversion is demonstrated to be achievable in the case where there is no decoherence, and both n and N are small. However, the time it takes to complete the down-conversion is very long, leaving the efficiency prone to decoherence. It is argued that for the frequency conversion to be able to be accomplished in a typical decoherent environment, both n and N need to be large. The study of the dynamics, in this case, is left for future research.

DOI
10.13140/rg.2.2.22695.39848

Related papers

Active Modulation of Er3+ Emission Lifetime by VO2 Phase‐Change Thin Films

Boris Kalinic, Tiziana Cesca, Alessandro Lovo +6 more

The active modulation of optical response of quantum emitters at the nanoscale is of paramount importance to realize tunable light sources for nanophotonic devices. Herein, a thin film of phase‐change material (VO2) is coupled to a 20 nm‐thick silica layer embedding Er3+ ions, and it is demonstrated how the active tuning of the local density of optical states near the erbium emitters provided by the thermally induced semiconductor‐to‐metal transition of VO2 can be used to dynamically control the Er3+ emission lifetime at telecom wavelength (1.54 μm). A decay rate contrast of a factor 2 is obtained between high temperature (90 °C), when VO2 is metallic, and room temperature, when VO2 is semiconductor, in agreement with calculations performed with the classical dipole oscillator analytical model. A hysteretic behavior is observed by measuring the Er3+ lifetime as a function of the temperature, whose parameters are consistent with those of grazing incidence X‐ray diffraction and optical transmittance measurements. The fractions of Er3+ ions that couple with VO2 in each phase at the different temperatures are determined by the analysis of the temporal decays. The results make the investigated system an optimal candidate for the development of tunable photon sources at telecom wavelength.

Advanced Photonics Research•Nov 14, 2023•4 citations

Nanocavity-Mediated Purcell Enhancement of Er in TiO2 Thin Films Grown via Atomic Layer Deposition

Cheng Ji, Michael T. Solomon, Gregory D. Grant +12 more

High Resolution Image Download MS PowerPoint Slide The use of trivalent erbium (Er 3+ ), typically embedded as an atomic defect in the solid-state, has widespread adoption as a dopant in telecommunication devices and shows promise as a spin-based quantum memory for quantum communication. In particular, its natural telecom C-band optical transition and spin-photon interface make it an ideal candidate for integration into existing optical fiber networks without the need for quantum frequency conversion. However, successful scaling requires a host material with few intrinsic nuclear spins, compatibility with semiconductor foundry processes, and straightforward integration with silicon photonics. Here, we present Er-doped titanium dioxide (TiO 2 ) thin film growth on silicon substrates using a foundry-scalable atomic layer deposition process with a wide range of doping controls over the Er concentration. Even though the as-grown films are amorphous after oxygen annealing, they exhibit relatively large crystalline grains, and the embedded Er ions exhibit the characteristic optical emission spectrum from anatase TiO 2 . Critically, this growth and annealing process maintains the low surface roughness required for nanophotonic integration. Finally, we interface Er ensembles with high quality factor Si nanophotonic cavities via evanescent coupling and demonstrate a large Purcell enhancement (≈300) of their optical lifetime. Our findings demonstrate a low-temperature, nondestructive, and substrate-independent process for integrating Er-doped materials with silicon photonics. At high doping densities this platform can enable integrated photonic components such as on-chip amplifiers and lasers, while dilute concentrations can realize single ion quantum memories.

arXiv:2309.13490•ACS Nano•Mar 27, 2024•27 citations

Incorporation of erbium ions into thin-film lithium niobate integrated photonics

Sihao Wang, Likai Yang, Risheng Cheng +5 more

As an active material with favorable linear and nonlinear optical properties, thin-film lithium niobate has demonstrated its potential in integrated photonics. Integration with rare-earth ions, which are promising candidates for quantum memories and transducers, will enrich the system with new applications in quantum information processing. Here, we investigate the optical properties at 1.5 μm wavelengths of rare-earth ions (Er3+) implanted in thin-film lithium niobate waveguides and micro-ring resonators. Optical quality factors near a million after post-annealing show that ion implantation damage can be repaired. The transition linewidth and fluorescence lifetime of erbium ions are characterized. The ion-cavity coupling is observed through a Purcell enhanced fluorescence from which a Purcell factor of 3.8 ± 0.5, compared with waveguide lifetime, is extracted. This platform is compatible with top-down lithography processes and leads to a scalable path for controlling spin-photon interfaces in photonic circuits.

arXiv:1912.07584•Applied Physics Letters•Apr 13, 2020•71 citations

Quasi-deterministic localization of Er emitters in thin film TiO2 through submicron-scale crystalline phase control

Sean E. Sullivan, Jonghoon Ahn, Tao Zhou +5 more

With their shielded 4f orbitals, rare-earth ions (REIs) offer optical and electron spin transitions with good coherence properties even when embedded in a host crystal matrix, highlighting their utility as promising quantum emitters and memories for quantum information processing. Among REIs, trivalent erbium (Er3+) uniquely has an optical transition in the telecom C-band, ideal for transmission over optical fibers, making it well suited for applications in quantum communication. The deployment of Er3+ emitters into a thin film TiO2 platform has been a promising step toward scalable integration; however, like many solid-state systems, the deterministic spatial placement of quantum emitters remains an open challenge. We investigate laser annealing as a means to locally tune the optical resonance of Er3+ emitters in TiO2 thin films on Si. Using both nanoscale x-ray diffraction measurements and cryogenic photoluminescence spectroscopy, we show that tightly focused below-gap laser annealing can induce anatase to rutile phase transitions in a nearly diffraction-limited area of the films and improve local crystallinity through grain growth. As a percentage of Er:TiO2 is converted to rutile, the Er3+ optical transition blueshifts by 13 nm. We explore the effects of changing laser annealing time and show that the amount of optically active Er:rutile increases linearly with laser power. We additionally demonstrate local phase conversion on microfabricated Si structures, which holds significance for quantum photonics.

arXiv:2308.14999•Applied Physics Letters•Dec 18, 2023•7 citations

Engineering and polarization properties of erbium-implanted lithium niobate films for integrated quantum applications

Alex E. Kaloyeros, Souryaya Dutta, Spyros Gallis

Rare-earth-doped materials have garnered significant attention as material platforms in emerging quantum information and integrated photonic technologies. Concurrently, advances in its nanofabrication processes have unleashed thin film lithium niobate (LN) as a leading force of research in these technologies, encompassing many outstanding properties in a single material. Leveraging the scalability of ion implantation to integrate rare-earth erbium (Er3+), which emits at 1532 nm, into LN can enable a plethora of exciting photonic and quantum technologies operating in the telecom C-band. Many of these technologies rely on coupling via polarization-sensitive photonic structures such as waveguides and optical nanocavities, necessitating fundamental material studies. Toward this goal, we have conducted an extensive study on the role of implantation and post-implantation processing in minimizing implantation-induced defectivity in x-cut thin film LN on an insulator. By leveraging this, we have demonstrated a cutting-edge ensemble optical linewidth of 140 GHz for Er emission in x-cut thin-film LN at 77 K. This finding highlights the significant progress in minimizing implantation-induced defects through careful ion implantation engineering and post-implantation processing. To the best of our knowledge, this linewidth measured at a higher temperature (77 K) is the narrowest when compared to the values reported for bulk-doped and implanted LN crystals at liquid helium temperatures (∼3 K), showcasing the potential of our approach for higher-temperature operation devices. Furthermore, we show that the Er photoluminescence (PL) is highly polarized perpendicular to the x-cut LN c-axis through systematic and combinational PL and high-resolution scanning transmission electron microscopy (HRSTEM) studies. These results indicate that using Er emitters in thin film LN, along with their polarization characteristics and related ion implantation engineering, presents an opportunity to produce highly luminescent Er-doped LN photonic integrated devices and circuits for quantum and nanophotonic applications at telecom wavelengths.

APL Materials•Nov 1, 2024•4 citations

Dynamic control of light emission faster than the lifetime limit using VO2 phase-change

Sébastien Cueff, Dongfang Li, You Zhou +4 more

Modulation is a cornerstone of optical communication, and as such, governs the overall speed of data transmission. Currently, the two main strategies for modulating light are direct modulation of the excited emitter population (for example, using semiconductor lasers) and external optical modulation (for example, using Mach-Zehnder interferometers or ring resonators). However, recent advances in nanophotonics offer an alternative approach to control spontaneous emission through modifications to the local density of optical states. Here, by leveraging the phase-change of a vanadium dioxide nanolayer, we demonstrate broadband all-optical direct modulation of 1.5 μm emission from trivalent erbium ions more than three orders of magnitude faster than their excited state lifetime. This proof-of-concept demonstration shows how integration with phase-change materials can transform widespread phosphorescent materials into high-speed optical sources that can be integrated in monolithic nanoscale devices for both free-space and on-chip communication.

Nature Communications•Oct 22, 2015•129 citations
Erbium (Er) is a lanthanide element, mainly used in its trivalent ionic form (Er3+), as an active dopant in optical devices, for light amplification or generation. The luminescence of Er3+ lies within the conventional wavelength band, 1530-1565 nm, for fiber-optic communication. The low noise, linear response, and stability of the optical gain provided by the Er3+ luminescence are ideal for applications in photonic systems that operate in the fiber-optic frequency. While much research has been done to understand the Er3+ luminescence in various lasing media, few studies have been conducted to tap the potential of Er for applications other than amplifiers or lasers. This thesis delves into two new areas, namely optical modulation and quantum computation, where the Er3+ luminescence may be able to be applied in a novel way. \n \nBy incorporating Er3+ into a switchable optical material, an optical modulator could potentially be made that is capable of not only switching but also amplifying signal transmission or sustaining the signal intensity from propagation losses. This integrated approach could reduce device footprint and latency for on-chip as well as synchronous applications. Successful integration of Er, however, has never been demonstrated in conventional optical modulators because their reliance on electro-optic effects conflicts with the carrier-sensitive mechanism of the Er3+ luminescence. The compatibility between Er and a recently advocated optical material, namely vanadium dioxide (VO2), is examined in the first part of this thesis. VO2 exhibits a hysteretic, bistable phase transition that is accompanied by a high-contrast optical switching in infrared, including the fiber-optic, wavelength band. The phase transition can be triggered thermally as well as optically. When triggered optically, it can occur in picosecond timescale, making VO2 a promising material for ultrafast optical switching applications. \n \nExperimental characterizations of the Er3+ luminescence and the optical switching were performed on selectively prepared thin-film samples of VO2. The Er3+ luminescence could be observed after the samples were implanted with Er and then annealed between 800C and 1000C. The optical switching could also be measured in the implanted and annealed samples as they were thermally heated up and then cooled down past the critical temperature of the phase transition. The Er-implanted samples, however, were found to have broader hysteresis and lower switching contrasts than the pure VO2 samples. It is concluded that although Er-implanted VO2 could probably work as a combined optical switch and amplifier, the poorer switching qualities do not guarantee that a device based on the material could provide better utility than a separated system of optical switches and Er amplifiers. \n \nThe Er3+ luminescence could also be utilized for quantum frequency conversion, for implementation in interconnects that interface superconducting quantum computers to a fiber-optic quantum network. For two superconducting quantum computers to be able to communicate over a fiber-optic quantum network, the frequency of the signals transmitted from either computer needs to be converted into the fiber-optic frequency, and then back into the microwave frequency upon receipt at the other computer. Early proposals suggested that the interconnect be at least comprised of Er3+ ions, a microwave resonator, and an optical resonator. The realization of this system has been attempted recently in basic experiments, but the conversion efficiency was found to be too low. The weak couplings between the Er3+ ions and the two resonators were identified as one of the main reasons for the low conversion efficiency. One way to mitigate the weak coupling in the microwave part is to have a superconducting flux qubit bridge the interaction between the Er3+ ions and the microwave resonator. \n \nThe second part of this thesis presents a theoretical and simulation study of the dynamics of a coupled system consisting of Er3+ ions, a superconducting microwave resonator, an optical resonator, and a superconducting flux qubit. It is shown that quantum information can be exchanged between the Er3+ ions and the microwave resonator with a high fidelity via the qubit coupling, and the exchange process is controllable by changing the frequency of the qubit. The frequency conversion between the microwave and the optical regime is shown to be infeasible to be realized at the limit where the number of optical excitations (n) is much less than the number of ions (N). A high-efficiency frequency down-conversion is demonstrated to be achievable in the case where there is no decoherence, and both n and N are small. However, the time it takes to complete the down-conversion is very long, leaving the efficiency prone to decoherence. It is argued that for the frequency conversion to be able to be accomplished in a typical decoherent environment, both n and N need to be large. The study of the dynamics, in this case, is left for future research.
The active modulation of optical response of quantum emitters at the nanoscale is of paramount importance to realize tunable light sources for nanophotonic devices. Herein, a thin film of phase‐change material (VO2) is coupled to a 20 nm‐thick silica layer embedding Er3+ ions, and it is demonstrated how the active tuning of the local density of optical states near the erbium emitters provided by the thermally induced semiconductor‐to‐metal transition of VO2 can be used to dynamically control the Er3+ emission lifetime at telecom wavelength (1.54 μm). A decay rate contrast of a factor 2 is obtained between high temperature (90 °C), when VO2 is metallic, and room temperature, when VO2 is semiconductor, in agreement with calculations performed with the classical dipole oscillator analytical model. A hysteretic behavior is observed by measuring the Er3+ lifetime as a function of the temperature, whose parameters are consistent with those of grazing incidence X‐ray diffraction and optical transmittance measurements. The fractions of Er3+ ions that couple with VO2 in each phase at the different temperatures are determined by the analysis of the temporal decays. The results make the investigated system an optimal candidate for the development of tunable photon sources at telecom wavelength.
High Resolution Image Download MS PowerPoint Slide The use of trivalent erbium (Er 3+ ), typically embedded as an atomic defect in the solid-state, has widespread adoption as a dopant in telecommunication devices and shows promise as a spin-based quantum memory for quantum communication. In particular, its natural telecom C-band optical transition and spin-photon interface make it an ideal candidate for integration into existing optical fiber networks without the need for quantum frequency conversion. However, successful scaling requires a host material with few intrinsic nuclear spins, compatibility with semiconductor foundry processes, and straightforward integration with silicon photonics. Here, we present Er-doped titanium dioxide (TiO 2 ) thin film growth on silicon substrates using a foundry-scalable atomic layer deposition process with a wide range of doping controls over the Er concentration. Even though the as-grown films are amorphous after oxygen annealing, they exhibit relatively large crystalline grains, and the embedded Er ions exhibit the characteristic optical emission spectrum from anatase TiO 2 . Critically, this growth and annealing process maintains the low surface roughness required for nanophotonic integration. Finally, we interface Er ensembles with high quality factor Si nanophotonic cavities via evanescent coupling and demonstrate a large Purcell enhancement (≈300) of their optical lifetime. Our findings demonstrate a low-temperature, nondestructive, and substrate-independent process for integrating Er-doped materials with silicon photonics. At high doping densities this platform can enable integrated photonic components such as on-chip amplifiers and lasers, while dilute concentrations can realize single ion quantum memories.
As an active material with favorable linear and nonlinear optical properties, thin-film lithium niobate has demonstrated its potential in integrated photonics. Integration with rare-earth ions, which are promising candidates for quantum memories and transducers, will enrich the system with new applications in quantum information processing. Here, we investigate the optical properties at 1.5 μm wavelengths of rare-earth ions (Er3+) implanted in thin-film lithium niobate waveguides and micro-ring resonators. Optical quality factors near a million after post-annealing show that ion implantation damage can be repaired. The transition linewidth and fluorescence lifetime of erbium ions are characterized. The ion-cavity coupling is observed through a Purcell enhanced fluorescence from which a Purcell factor of 3.8 ± 0.5, compared with waveguide lifetime, is extracted. This platform is compatible with top-down lithography processes and leads to a scalable path for controlling spin-photon interfaces in photonic circuits.
With their shielded 4f orbitals, rare-earth ions (REIs) offer optical and electron spin transitions with good coherence properties even when embedded in a host crystal matrix, highlighting their utility as promising quantum emitters and memories for quantum information processing. Among REIs, trivalent erbium (Er3+) uniquely has an optical transition in the telecom C-band, ideal for transmission over optical fibers, making it well suited for applications in quantum communication. The deployment of Er3+ emitters into a thin film TiO2 platform has been a promising step toward scalable integration; however, like many solid-state systems, the deterministic spatial placement of quantum emitters remains an open challenge. We investigate laser annealing as a means to locally tune the optical resonance of Er3+ emitters in TiO2 thin films on Si. Using both nanoscale x-ray diffraction measurements and cryogenic photoluminescence spectroscopy, we show that tightly focused below-gap laser annealing can induce anatase to rutile phase transitions in a nearly diffraction-limited area of the films and improve local crystallinity through grain growth. As a percentage of Er:TiO2 is converted to rutile, the Er3+ optical transition blueshifts by 13 nm. We explore the effects of changing laser annealing time and show that the amount of optically active Er:rutile increases linearly with laser power. We additionally demonstrate local phase conversion on microfabricated Si structures, which holds significance for quantum photonics.
Rare-earth-doped materials have garnered significant attention as material platforms in emerging quantum information and integrated photonic technologies. Concurrently, advances in its nanofabrication processes have unleashed thin film lithium niobate (LN) as a leading force of research in these technologies, encompassing many outstanding properties in a single material. Leveraging the scalability of ion implantation to integrate rare-earth erbium (Er3+), which emits at 1532 nm, into LN can enable a plethora of exciting photonic and quantum technologies operating in the telecom C-band. Many of these technologies rely on coupling via polarization-sensitive photonic structures such as waveguides and optical nanocavities, necessitating fundamental material studies. Toward this goal, we have conducted an extensive study on the role of implantation and post-implantation processing in minimizing implantation-induced defectivity in x-cut thin film LN on an insulator. By leveraging this, we have demonstrated a cutting-edge ensemble optical linewidth of 140 GHz for Er emission in x-cut thin-film LN at 77 K. This finding highlights the significant progress in minimizing implantation-induced defects through careful ion implantation engineering and post-implantation processing. To the best of our knowledge, this linewidth measured at a higher temperature (77 K) is the narrowest when compared to the values reported for bulk-doped and implanted LN crystals at liquid helium temperatures (∼3 K), showcasing the potential of our approach for higher-temperature operation devices. Furthermore, we show that the Er photoluminescence (PL) is highly polarized perpendicular to the x-cut LN c-axis through systematic and combinational PL and high-resolution scanning transmission electron microscopy (HRSTEM) studies. These results indicate that using Er emitters in thin film LN, along with their polarization characteristics and related ion implantation engineering, presents an opportunity to produce highly luminescent Er-doped LN photonic integrated devices and circuits for quantum and nanophotonic applications at telecom wavelengths.
Modulation is a cornerstone of optical communication, and as such, governs the overall speed of data transmission. Currently, the two main strategies for modulating light are direct modulation of the excited emitter population (for example, using semiconductor lasers) and external optical modulation (for example, using Mach-Zehnder interferometers or ring resonators). However, recent advances in nanophotonics offer an alternative approach to control spontaneous emission through modifications to the local density of optical states. Here, by leveraging the phase-change of a vanadium dioxide nanolayer, we demonstrate broadband all-optical direct modulation of 1.5 μm emission from trivalent erbium ions more than three orders of magnitude faster than their excited state lifetime. This proof-of-concept demonstration shows how integration with phase-change materials can transform widespread phosphorescent materials into high-speed optical sources that can be integrated in monolithic nanoscale devices for both free-space and on-chip communication.