Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Development of an All-SFQ Superconducting Field-Programmable Gate Array

Calvin Christopher Maree, Coenrad Johann Fourie

Published Dec 11, 2018• 5 citations
Publisher

Abstract

Recent advances in fabrication complexity and density-especially for the Institute of Advanced Industrial Science and Technology (AIST) advanced process 2 (ADP2) process and the MIT Lincoln Lab (MITLL) SFQ5ee process and beyond-allow the implementation of a superconducting field-programmable gate array (SFPGA) with sufficient complexity to host a number of different programmed functions. We discuss design choices for an all single flux quantum SFPGA targeting these modern processes, making heavy use of passive transmission line (PTL) layers they provide. Various configurations for lookup tables, basic logic elements and timing schemes are shown, and a viable switch block implementation is discussed. Academic FPGA electronic design automation (EDA) tools are repurposed for mapping Verilog hardware description language (HDL) functions to the chosen SFPGA design, whilst HDL and electrical simulations are used to show its correct operation. We show simulations for programming and the operation of an SFPGA, and discuss die size requirements for practical implementation.

DOI
10.1109/tasc.2018.2886208

Related papers

An RSFQ Superconductive Programmable Gate Array

Coenrad Johann Fourie, H. van Heerden

Field-programmable gate arrays (FPGAs) allow circuit reconfiguration in the field, which adds to the flexibility of electronic systems. Applied to superconductive electronics, reprogrammability allows system functionality to be changed without remanufacturing the circuit or dismantling a cryogenic setup. We discuss the design issues relevant to a superconducting programmable gate array (SPGA), and report an elementary 4200-junction SPGA. The SPGA is built around interconnected 2-input logic blocks which contain 4-bit lookup tables. Designs for the programming frame, address decoding, lookup tables and switch implementations are discussed, together with design constraints imposed by the unidirectional nature and large size of single flux quantum (SFQ) transmission lines.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•17 citations

Superconducting Magnetic Field Programmable Gate Array

Naveen Kumar Katam, Oleg A. Mukhanov, Massoud Pedram

Field-programmable gate arrays (FPGAs) provide a significantly cheaper solution for various applications in traditional semiconductor electronics. Single flux quantum (SFQ) technologies are developing rapidly and the availability of SFQ-specific FPGA will be very useful. Towards developing such an SFQ-specific FPGA, new designs of FPGA subcircuits for both synchronous and asynchronous operation of SFQ circuits are presented in this paper. Magnetic Josephson junctions (MJJs) are used as bias limiting junctions in energy-efficient rapid SFQ (ERSFQ) biasing to implement programmable switches in various subcircuits of the proposed FPGA fabric. Designs of all FPGA subcircuits are developed and are verified through circuit simulation. Verilog hardware description language (HDL) models are also developed for all FPGA circuit blocks to facilitate large-scale FPGA simulations for the implementation of the desired circuit on the proposed FPGA fabric. Designs of a few subcircuits with switches based on nondestructive readout cell are also given in the current paper for better comparison with MJJ switch based counterparts. Programming of MJJ-based switches is based on the ability to control the critical current of MJJs externally. Recent implementations of SFQ decoder is proposed for accessing individual MJJs through the current lines in a crossbar structure. Estimations for the area and power consumption are much better in comparison to previous attempts at designing an SFQ specific FPGA.

IEEE Transactions on Applied Superconductivity•Jan 24, 2018•36 citations

Design and Demonstration of a Superconducting Field-Programmable Gate Array Using Adiabatic Quantum-Flux-Parametron Logic and Memory

Daichi Takahashi, Naoki Takeuchi, Yuki Yamanashi +1 more

Adiabatic quantum-flux-parametron (AQFP) logic is a promising technology for future energy-efficient, high- performance information processing systems because it has significantly low power consumption due to the adiabatic switching of Josephson junctions. We are developing a high-performance field-programmable gate array (FPGA) using superconducting AQFP circuits to reduce its energy consumption. The all-AQFP FPGA consists of logic blocks, switch blocks, connection blocks, and memory using AQFP circuits. In particular, the memory is composed of AQFP buffer chains, enabling high-density and low-power memory. The switch blocks can perform data routing as well as several logic functions, including majority,and, andorfunctions, which increases the design flexibility of the all-AQFP FPGA. We fabricated a one-unit all-AQFP FPGA and demonstrated its reconfigurable operation at low speed. It was found that much lower power consumption can be achieved in the new FPGA than in the other superconducting FPGAs.

IEEE Transactions on Applied Superconductivity•Jul 6, 2022•5 citations

The design and testing of a superconducting programmable gate array

H. van Heerden

This thesis investigates to the design, analysis and testing of a Superconducting Programmable Gate Array (SPGA). The objective was to apply existing programmable logic concepts to RSFQ circuits and in the process develop a working prototype of a superconducting programmable logic device. Various programmable logic technologies and architectures were examined and compared to find the best solution. Using Rapid Single Flux Quantum (RSFQ) circuits as building blocks, a complete functional design was assembled incorporating a routing architecture and logic blocks. The Large-Scale Integrated circuit (LSI) layout of the final chip is presented and discussed followed by a discussion on testing. This thesis demonstrates the successful implementation of a fully functional reprogrammable logic device using RSFQ circuitry.

•Mar 1, 2006•2 citations

SystemVerilog Modeling of SFQ and AQFP Circuits

Ramy N. Tadros, Arash Fayyazi, Massoud Pedram +1 more

Exascale computing and its associated increasingly massive amounts of data require increasingly efficient computing platforms; and semiconductor technology is struggling to keep up. Meanwhile, superconducting electronics (SCE) is increasingly gaining interest in both industry and academia as a serious contender to replace silicon for supercomputing. In particular, nonresistively biased single-flux quantum (SFQ) circuits have a theoretical potential of three orders of magnitude reduction in power accompanied with one order of magnitude of higher speed, and adiabatic quantum-flux-parametron (AQFP) circuits possess a theoretical potential of six orders of magnitude reduction in power when compared to the state-of-the-art semiconductor circuits. Unfortunately, the SCE community lacks a reliable design flow. Rather than creating a complete design flow from scratch, it is often more efficient to reuse well-established semiconductor tool flows developed by EDA companies that have benefited from research and development over the past half-century. One of the components of this flow is the hardware description language (HDL) modeling of gates for behavioral and functional simulation of large netlists. The previous HDL models proposed for SCE lack modularity are not compatible with existing CMOS standards, and are overly complex. This article presents SystemVerilog models for SFQ and AQFP gates and the circuits that interface between them. Our models are compatible with standard delay format and commercial simulators. They offer a generalizable modular debugging platform, are elegant and conceptual, and can capture many circuit parameters, environmental effects, and advanced SCE phenomena.

IEEE Transactions on Applied Superconductivity•Dec 2, 2019•18 citations

VLSI complexity single flux quantum systems

Jabbari, Tahereh, Friedman, Eby G.

Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.

•Jan 1, 2023•0 citations
Recent advances in fabrication complexity and density-especially for the Institute of Advanced Industrial Science and Technology (AIST) advanced process 2 (ADP2) process and the MIT Lincoln Lab (MITLL) SFQ5ee process and beyond-allow the implementation of a superconducting field-programmable gate array (SFPGA) with sufficient complexity to host a number of different programmed functions. We discuss design choices for an all single flux quantum SFPGA targeting these modern processes, making heavy use of passive transmission line (PTL) layers they provide. Various configurations for lookup tables, basic logic elements and timing schemes are shown, and a viable switch block implementation is discussed. Academic FPGA electronic design automation (EDA) tools are repurposed for mapping Verilog hardware description language (HDL) functions to the chosen SFPGA design, whilst HDL and electrical simulations are used to show its correct operation. We show simulations for programming and the operation of an SFPGA, and discuss die size requirements for practical implementation.
Field-programmable gate arrays (FPGAs) allow circuit reconfiguration in the field, which adds to the flexibility of electronic systems. Applied to superconductive electronics, reprogrammability allows system functionality to be changed without remanufacturing the circuit or dismantling a cryogenic setup. We discuss the design issues relevant to a superconducting programmable gate array (SPGA), and report an elementary 4200-junction SPGA. The SPGA is built around interconnected 2-input logic blocks which contain 4-bit lookup tables. Designs for the programming frame, address decoding, lookup tables and switch implementations are discussed, together with design constraints imposed by the unidirectional nature and large size of single flux quantum (SFQ) transmission lines.
Field-programmable gate arrays (FPGAs) provide a significantly cheaper solution for various applications in traditional semiconductor electronics. Single flux quantum (SFQ) technologies are developing rapidly and the availability of SFQ-specific FPGA will be very useful. Towards developing such an SFQ-specific FPGA, new designs of FPGA subcircuits for both synchronous and asynchronous operation of SFQ circuits are presented in this paper. Magnetic Josephson junctions (MJJs) are used as bias limiting junctions in energy-efficient rapid SFQ (ERSFQ) biasing to implement programmable switches in various subcircuits of the proposed FPGA fabric. Designs of all FPGA subcircuits are developed and are verified through circuit simulation. Verilog hardware description language (HDL) models are also developed for all FPGA circuit blocks to facilitate large-scale FPGA simulations for the implementation of the desired circuit on the proposed FPGA fabric. Designs of a few subcircuits with switches based on nondestructive readout cell are also given in the current paper for better comparison with MJJ switch based counterparts. Programming of MJJ-based switches is based on the ability to control the critical current of MJJs externally. Recent implementations of SFQ decoder is proposed for accessing individual MJJs through the current lines in a crossbar structure. Estimations for the area and power consumption are much better in comparison to previous attempts at designing an SFQ specific FPGA.
Adiabatic quantum-flux-parametron (AQFP) logic is a promising technology for future energy-efficient, high- performance information processing systems because it has significantly low power consumption due to the adiabatic switching of Josephson junctions. We are developing a high-performance field-programmable gate array (FPGA) using superconducting AQFP circuits to reduce its energy consumption. The all-AQFP FPGA consists of logic blocks, switch blocks, connection blocks, and memory using AQFP circuits. In particular, the memory is composed of AQFP buffer chains, enabling high-density and low-power memory. The switch blocks can perform data routing as well as several logic functions, including majority,and, andorfunctions, which increases the design flexibility of the all-AQFP FPGA. We fabricated a one-unit all-AQFP FPGA and demonstrated its reconfigurable operation at low speed. It was found that much lower power consumption can be achieved in the new FPGA than in the other superconducting FPGAs.
This thesis investigates to the design, analysis and testing of a Superconducting Programmable Gate Array (SPGA). The objective was to apply existing programmable logic concepts to RSFQ circuits and in the process develop a working prototype of a superconducting programmable logic device. Various programmable logic technologies and architectures were examined and compared to find the best solution. Using Rapid Single Flux Quantum (RSFQ) circuits as building blocks, a complete functional design was assembled incorporating a routing architecture and logic blocks. The Large-Scale Integrated circuit (LSI) layout of the final chip is presented and discussed followed by a discussion on testing. This thesis demonstrates the successful implementation of a fully functional reprogrammable logic device using RSFQ circuitry.
Exascale computing and its associated increasingly massive amounts of data require increasingly efficient computing platforms; and semiconductor technology is struggling to keep up. Meanwhile, superconducting electronics (SCE) is increasingly gaining interest in both industry and academia as a serious contender to replace silicon for supercomputing. In particular, nonresistively biased single-flux quantum (SFQ) circuits have a theoretical potential of three orders of magnitude reduction in power accompanied with one order of magnitude of higher speed, and adiabatic quantum-flux-parametron (AQFP) circuits possess a theoretical potential of six orders of magnitude reduction in power when compared to the state-of-the-art semiconductor circuits. Unfortunately, the SCE community lacks a reliable design flow. Rather than creating a complete design flow from scratch, it is often more efficient to reuse well-established semiconductor tool flows developed by EDA companies that have benefited from research and development over the past half-century. One of the components of this flow is the hardware description language (HDL) modeling of gates for behavioral and functional simulation of large netlists. The previous HDL models proposed for SCE lack modularity are not compatible with existing CMOS standards, and are overly complex. This article presents SystemVerilog models for SFQ and AQFP gates and the circuits that interface between them. Our models are compatible with standard delay format and commercial simulators. They offer a generalizable modular debugging platform, are elegant and conceptual, and can capture many circuit parameters, environmental effects, and advanced SCE phenomena.
Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.