Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

The design and testing of a superconducting programmable gate array

H. van Heerden

Published Mar 1, 2006• 2 citations
OpenAlex

Abstract

This thesis investigates to the design, analysis and testing of a Superconducting Programmable Gate Array (SPGA). The objective was to apply existing programmable logic concepts to RSFQ circuits and in the process develop a working prototype of a superconducting programmable logic device. Various programmable logic technologies and architectures were examined and compared to find the best solution. Using Rapid Single Flux Quantum (RSFQ) circuits as building blocks, a complete functional design was assembled incorporating a routing architecture and logic blocks. The Large-Scale Integrated circuit (LSI) layout of the final chip is presented and discussed followed by a discussion on testing. This thesis demonstrates the successful implementation of a fully functional reprogrammable logic device using RSFQ circuitry.

Related papers

A tool kit for the design of superconducting programmable gate arrays

Coenrad Johann Fourie

ENGLISH ABSTRACT: The development of a tool kit for the design of superconducting programmable gate \narrays (SPGAs) is discussed. A circuit optimizer using genetic algorithms is developed \nand evaluated. Techniques and a program are also developed for the generation of \nsegmentized 3D models with which to calculate inductance in circuit structures through \nFastHenry. The ability to add random variations to the dimensions of the models is \nincluded. These tools are then used to design novel latching elements that allow the \nconstruction of reprogrammable Rapid Single Flux Quantum (RSFQ) circuits. A circular \nprocess is used, whereby layouts are converted back to circuit diagrams through element \nextraction, and reoptimized if necessary. Two programmable frequency dividers are then \ndesigned; one for testing the routing and switch structures and programming architecture \nof an SPGA, and another compact one for testing the latching elements and off-chip \ninterface. The dissertation concludes with an overview of the circuits necessary for the \nimplementation of a fully functional SPGA.

•Dec 1, 2004•10 citations

An RSFQ Superconductive Programmable Gate Array

Coenrad Johann Fourie, H. van Heerden

Field-programmable gate arrays (FPGAs) allow circuit reconfiguration in the field, which adds to the flexibility of electronic systems. Applied to superconductive electronics, reprogrammability allows system functionality to be changed without remanufacturing the circuit or dismantling a cryogenic setup. We discuss the design issues relevant to a superconducting programmable gate array (SPGA), and report an elementary 4200-junction SPGA. The SPGA is built around interconnected 2-input logic blocks which contain 4-bit lookup tables. Designs for the programming frame, address decoding, lookup tables and switch implementations are discussed, together with design constraints imposed by the unidirectional nature and large size of single flux quantum (SFQ) transmission lines.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•17 citations

Reconfigurable Logic Cell for Superconducting Magnetic Field Programmable Gate Array

Naveen Kumar Katam, Haolin Cong, Massoud Pedram

Field Programmable gate arrays (FPGAs) are one of the most successful circuits in the semiconductor industry. In the absence of a reliable three-terminal switch like MOSFET for rapid single flux quantum(RSFQ) technology, it was difficult to implement FPGA like reconfiguralbe circuits. However, a recently proposed superconducting magnetic FPGA (SMFPGA) implements a controllable switch by controlling the critical current of magnetic Josephson Junctions (MJJs) placed in energy-efficient RSFQ bias network. For implementing a configurable logic block (CLB) with a smaller area for the said FPGA, we designed a reconfigurable gate that can implement four basic logical functions: AND, OR, XOR and NOT. The programmability to implement the four functions is achieved by introducing MJJs in the circuit at specific locations and programming their critical current. The gate is made reconfigurable by having the ability to change both the bias current at different ports and the critical current of a JJ in the gate to two different values. This makes the size of CLB ten times smaller compared to the earlier design and simplifies the SMFPGA. We describe the design methodology and the simulation results of the reconfigurable gate.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2019•1 citation

Design of superconductor digital circuits for a 30 GHz DSP and for interface to qubits

Samuel Intiso

Superconducting digital technology based on Rapid Single Flux Quantum logic (RSFQ) is a digital technology characterized by high speed, low power consumption and low operational temperatures. RSFQ is attractive for many applications and in particular for high frequency Digital Signal Processing (DSP) and for digital control of mK devices like superconducting qubits. Due to the 30 GHz clock speed, RSFQ DSP could be used to implement a Successive Interference Canceller for multi-user detection in a 3G wireless systems. The being developed DSP consists of a digital core, an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory and external semiconductor memory.The first part of this thesis is focusing on architecture and implementation of the hierarchical CMOS-RSFQ hybrid memory for the RSFQ DSP. The architecture ofthe RSFQ cache is optimized in order to reach the highest speed and reliable data communication with CMOS memory. Aspects of block synchronization betweenthe RSFQ cache and the RSFQ digital core are discussed and solved using a new developed RSFQ gate, C3. For design of different components of the DSP, a designapproach based on validated VHDL models is proposed and experimentally verified.The second part of this thesis is focusing on the design oflow-dissipative RSFQ circuits for interface to the superconducting qubits. Power dissipation ofRSFQ circuits is minimized. A low-temperature thermal model of resistively shunted Josephsonjunctions is developed and applied to optimize the shape of the shunt resistors in order to reduce their electron temperature. Depending on the available fabricationprocess the lowest noise temperature of RSFQ circuit can be in the range from 90 mK to 180 mK.

•Jan 1, 2006•0 citations

Design of an RSFQ microprocessor

P. Bunyk, Vasili K. Semenov

We are discussing a general-purpose microprocessor architecture that is suitable for implementation using the Rapid Single-Flux-Quantum (RSFQ) family of logic-memory circuits. While the microprocessor provides a functionally complete RISC instruction set with 16-bit words, a bit-serial self-timed approach makes it simple enough to be fabricated using the current Josephson junction technology. Our plans are to design, fabricate and test a completely operational prototype of this system.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•13 citations

Optimised asynchronous self-timing for superconducting RSFQ logic circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested

IEEE AFRICON•Apr 6, 2005•2 citations
This thesis investigates to the design, analysis and testing of a Superconducting Programmable Gate Array (SPGA). The objective was to apply existing programmable logic concepts to RSFQ circuits and in the process develop a working prototype of a superconducting programmable logic device. Various programmable logic technologies and architectures were examined and compared to find the best solution. Using Rapid Single Flux Quantum (RSFQ) circuits as building blocks, a complete functional design was assembled incorporating a routing architecture and logic blocks. The Large-Scale Integrated circuit (LSI) layout of the final chip is presented and discussed followed by a discussion on testing. This thesis demonstrates the successful implementation of a fully functional reprogrammable logic device using RSFQ circuitry.
ENGLISH ABSTRACT: The development of a tool kit for the design of superconducting programmable gate \narrays (SPGAs) is discussed. A circuit optimizer using genetic algorithms is developed \nand evaluated. Techniques and a program are also developed for the generation of \nsegmentized 3D models with which to calculate inductance in circuit structures through \nFastHenry. The ability to add random variations to the dimensions of the models is \nincluded. These tools are then used to design novel latching elements that allow the \nconstruction of reprogrammable Rapid Single Flux Quantum (RSFQ) circuits. A circular \nprocess is used, whereby layouts are converted back to circuit diagrams through element \nextraction, and reoptimized if necessary. Two programmable frequency dividers are then \ndesigned; one for testing the routing and switch structures and programming architecture \nof an SPGA, and another compact one for testing the latching elements and off-chip \ninterface. The dissertation concludes with an overview of the circuits necessary for the \nimplementation of a fully functional SPGA.
Field-programmable gate arrays (FPGAs) allow circuit reconfiguration in the field, which adds to the flexibility of electronic systems. Applied to superconductive electronics, reprogrammability allows system functionality to be changed without remanufacturing the circuit or dismantling a cryogenic setup. We discuss the design issues relevant to a superconducting programmable gate array (SPGA), and report an elementary 4200-junction SPGA. The SPGA is built around interconnected 2-input logic blocks which contain 4-bit lookup tables. Designs for the programming frame, address decoding, lookup tables and switch implementations are discussed, together with design constraints imposed by the unidirectional nature and large size of single flux quantum (SFQ) transmission lines.
Field Programmable gate arrays (FPGAs) are one of the most successful circuits in the semiconductor industry. In the absence of a reliable three-terminal switch like MOSFET for rapid single flux quantum(RSFQ) technology, it was difficult to implement FPGA like reconfiguralbe circuits. However, a recently proposed superconducting magnetic FPGA (SMFPGA) implements a controllable switch by controlling the critical current of magnetic Josephson Junctions (MJJs) placed in energy-efficient RSFQ bias network. For implementing a configurable logic block (CLB) with a smaller area for the said FPGA, we designed a reconfigurable gate that can implement four basic logical functions: AND, OR, XOR and NOT. The programmability to implement the four functions is achieved by introducing MJJs in the circuit at specific locations and programming their critical current. The gate is made reconfigurable by having the ability to change both the bias current at different ports and the critical current of a JJ in the gate to two different values. This makes the size of CLB ten times smaller compared to the earlier design and simplifies the SMFPGA. We describe the design methodology and the simulation results of the reconfigurable gate.
Superconducting digital technology based on Rapid Single Flux Quantum logic (RSFQ) is a digital technology characterized by high speed, low power consumption and low operational temperatures. RSFQ is attractive for many applications and in particular for high frequency Digital Signal Processing (DSP) and for digital control of mK devices like superconducting qubits. Due to the 30 GHz clock speed, RSFQ DSP could be used to implement a Successive Interference Canceller for multi-user detection in a 3G wireless systems. The being developed DSP consists of a digital core, an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory and external semiconductor memory.The first part of this thesis is focusing on architecture and implementation of the hierarchical CMOS-RSFQ hybrid memory for the RSFQ DSP. The architecture ofthe RSFQ cache is optimized in order to reach the highest speed and reliable data communication with CMOS memory. Aspects of block synchronization betweenthe RSFQ cache and the RSFQ digital core are discussed and solved using a new developed RSFQ gate, C3. For design of different components of the DSP, a designapproach based on validated VHDL models is proposed and experimentally verified.The second part of this thesis is focusing on the design oflow-dissipative RSFQ circuits for interface to the superconducting qubits. Power dissipation ofRSFQ circuits is minimized. A low-temperature thermal model of resistively shunted Josephsonjunctions is developed and applied to optimize the shape of the shunt resistors in order to reduce their electron temperature. Depending on the available fabricationprocess the lowest noise temperature of RSFQ circuit can be in the range from 90 mK to 180 mK.
Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested