Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Superconducting Nanowire Single-Photon Detector on Aluminum Nitride

Di Zhu, Hyeongrak Choi, Tsung‐Ju Lu, Qingyuan Zhao, Andrew E. Dane, Faraz Najafi, Dirk Robert Englund, Karl K. Berggren

Published Jan 1, 2016• 14 citations
Publisher

Abstract

We report successful fabrication of niobium nitride single-photon detectors on aluminum nitride substrates. The fabricated detectors showed saturated detection efficiency at 2.45 K under 1550 nm illumination (indicating near-unity internal quantum efficiency), sub-60-ps jitter, and ∼6 ns reset time.
DOI
10.1364/cleo_qels.2016.ftu4c.1

Related papers

Fabrication Process Yielding Saturated Nanowire Single-Photon Detectors With 24-ps Jitter

Faraz Najafi, Andrew E. Dane, Francesco Bellei +4 more

We present an optimized fabrication process for superconducting nanowire single-photon detectors that allowed us to obtain a yield of ~70% for detectors based on 80-nm-wide niobium nitride nanowires. We fabricated detectors that showed 24-ps timing jitter and saturated detection efficiency without the need for cryogenic amplifiers, allowing for operation in a low-bias low-dark-count-rate regime while operating at maximum detection efficiency.

IEEE Journal of Selected Topics in Quantum Electronics•Dec 12, 2014•39 citations

Performances of NbTiN superconducting nanowire single photon detector

Shigehito Miki, Taro Yamashita, Hirotaka Terai +1 more

We present high performance fiber-coupled niobium titanium nitride superconducting nanowire single photon detectors fabricated on thermally oxidized silicon substrates. By applying a double sided cavity structure, simulated absorptance in the nanowire meander reached 97% at 1550 nm wavelength. The fabricated device showed a system detection efficiency (DE) of 74% at 1550 nm, dark count rate of 100 c/s, and a full width at half maximum timing jitter of 68 ps under a bias current of 18.0 μA with a practical Gifford-McMahon cryocooler system.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•1 citation

Nb$_x$Ti$_{1-x}$N low timing jitter single-photon detectors with unity internal efficiency at 1550 nm and 2.5 K

Julien Zichi, Jin Chang, Stephan Steinhauer +8 more

The requirements in quantum optics experiments for high single photon detection efficiency, low timing jitter, low dark count rate and short dead time have been fulfilled with the development of superconducting nanowire single photon detectors. Although they offer a detection efficiency above 90%, achieving a high time resolution in devices made of amorphous materials is a challenge, particularly at temperatures above 0.8 K. Devices made from niobium nitride and niobium titanium nitride allow to reach the best timing jitter, but in turn have stronger requirements in terms of film quality to achieve a high efficiency. Here we take advantage of the flexibility of reactive co-sputter deposition to tailor the composition of NbxTi1-xN superconducting films, and show that a Nb fraction of x = 0.62 allows for the fabrication of detectors from films as thick as 9 nm and covering an active area of 20 μm, with a wide detection saturation plateau at telecom wavelengths and in particular at 1550 nm. This is a signature of an internal detection efficiency saturation, achieved while maintaining the high time resolution associated with NbTiN and operation at 2.5K. With our optimized recipe, we reliably fabricated detectors with high critical current densities reaching a saturation plateau at 1550 nm with 80% system detection efficiency, and with a FWHM timing jitter as low as 19.47 ps.

arXiv:1905.06091•May 15, 2019•1 citation

Superconducting nanowire single-photon detectors fabricated from atomic-layer-deposited NbN

Risheng Cheng, Sihao Wang, Hong X. Tang

High-quality ultrathin films of niobium nitride (NbN) are developed by the plasma-enhanced atomic layer deposition (PEALD) technique. Superconducting nanowire single-photon detectors patterned from this material exhibit high switching currents and saturated internal efficiencies over a broad bias range at a telecommunication wavelength of 1550 nm. Statistical analyses on hundreds of fabricated devices show a near-unity throughput yield due to the exceptional homogeneity of the films. The ALD-NbN material represents an ideal superconducting material for fabricating large single-photon detector arrays combining high efficiency, low jitter, and low dark counts.

arXiv:1910.07010•Applied Physics Letters•Dec 9, 2019•41 citations

Superconducting nanowire single-photon detectors at a wavelength of 940 nm

W. J. Zhang, Hao Li, Lixing You +9 more

We develop single-photon detectors comprising single-mode fiber-coupled superconducting nanowires, with high system detection efficiencies at a wavelength of 940 nm. The detector comprises a 6.5-nm-thick, 110-nm-wide NbN nanowire meander fabricated onto a Si substrate with a distributed Bragg reflector for enhancing the optical absorptance. We demonstrate that, via the design of a low filling factor (1/3) and active area (Φ = 10 μm), the system reaches a detection efficiency of ∼60% with a dark count rate of 10 Hz, a recovery time <12 ns, and a timing jitter of ∼50 ps.

arXiv:1506.07921•AIP Advances•Jun 1, 2015•7 citations

Superconducting niobium nanowire single photon detectors

Anthony J. Annunziata, A. Frydman, Matthew O. Reese +3 more

We have fabricated and tested single photon detectors based on a current biased superconducting niobium nanowire patterned into a meander. The detectors are fabricated from high quality, ultra high vacuum sputtered niobium thin films on a sapphire substrate. For detection of single optical photons, we show that the superconductor's intrinsic kinetic inductance does not limit the reset time of the detector, which is ≈ 2 nanoseconds, in contrast to the longer reset times seen in niobium nitride detectors of similar size and geometry. We also describe a readout scheme for photon counting that is unique to Nb due to its lower resistivity. These detectors have applications in imaging of infrared photoemission from CMOS logic circuits as well as in optical communications and quantum information processing.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 18, 2006•14 citations
We present high performance fiber-coupled niobium titanium nitride superconducting nanowire single photon detectors fabricated on thermally oxidized silicon substrates. By applying a double sided cavity structure, simulated absorptance in the nanowire meander reached 97% at 1550 nm wavelength. The fabricated device showed a system detection efficiency (DE) of 74% at 1550 nm, dark count rate of 100 c/s, and a full width at half maximum timing jitter of 68 ps under a bias current of 18.0 μA with a practical Gifford-McMahon cryocooler system.
Nbx_xx​Ti1−x_{1-x}1−x​N low timing jitter single-photon detectors with unity internal efficiency at 1550 nm and 2.5 K
The requirements in quantum optics experiments for high single photon detection efficiency, low timing jitter, low dark count rate and short dead time have been fulfilled with the development of superconducting nanowire single photon detectors. Although they offer a detection efficiency above 90%, achieving a high time resolution in devices made of amorphous materials is a challenge, particularly at temperatures above 0.8 K. Devices made from niobium nitride and niobium titanium nitride allow to reach the best timing jitter, but in turn have stronger requirements in terms of film quality to achieve a high efficiency. Here we take advantage of the flexibility of reactive co-sputter deposition to tailor the composition of NbxTi1-xN superconducting films, and show that a Nb fraction of x = 0.62 allows for the fabrication of detectors from films as thick as 9 nm and covering an active area of 20 μm, with a wide detection saturation plateau at telecom wavelengths and in particular at 1550 nm. This is a signature of an internal detection efficiency saturation, achieved while maintaining the high time resolution associated with NbTiN and operation at 2.5K. With our optimized recipe, we reliably fabricated detectors with high critical current densities reaching a saturation plateau at 1550 nm with 80% system detection efficiency, and with a FWHM timing jitter as low as 19.47 ps.
High-quality ultrathin films of niobium nitride (NbN) are developed by the plasma-enhanced atomic layer deposition (PEALD) technique. Superconducting nanowire single-photon detectors patterned from this material exhibit high switching currents and saturated internal efficiencies over a broad bias range at a telecommunication wavelength of 1550 nm. Statistical analyses on hundreds of fabricated devices show a near-unity throughput yield due to the exceptional homogeneity of the films. The ALD-NbN material represents an ideal superconducting material for fabricating large single-photon detector arrays combining high efficiency, low jitter, and low dark counts.
We develop single-photon detectors comprising single-mode fiber-coupled superconducting nanowires, with high system detection efficiencies at a wavelength of 940 nm. The detector comprises a 6.5-nm-thick, 110-nm-wide NbN nanowire meander fabricated onto a Si substrate with a distributed Bragg reflector for enhancing the optical absorptance. We demonstrate that, via the design of a low filling factor (1/3) and active area (Φ = 10 μm), the system reaches a detection efficiency of ∼60% with a dark count rate of 10 Hz, a recovery time <12 ns, and a timing jitter of ∼50 ps.
We have fabricated and tested single photon detectors based on a current biased superconducting niobium nanowire patterned into a meander. The detectors are fabricated from high quality, ultra high vacuum sputtered niobium thin films on a sapphire substrate. For detection of single optical photons, we show that the superconductor's intrinsic kinetic inductance does not limit the reset time of the detector, which is ≈ 2 nanoseconds, in contrast to the longer reset times seen in niobium nitride detectors of similar size and geometry. We also describe a readout scheme for photon counting that is unique to Nb due to its lower resistivity. These detectors have applications in imaging of infrared photoemission from CMOS logic circuits as well as in optical communications and quantum information processing.