Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Kerr-induced controllable adiabatic frequency conversion in an ultrahigh Q silica toroid microcavity

Wataru Yoshiki, Yoshihiro Honda, Misako Kobayashi, Tomohiro Tetsumoto, Takasumi Tanabe

Published Nov 18, 2016• 18 citations
Publisher

Abstract

In this Letter, we report, based on our knowledge, the first demonstration of Kerr-induced adiabatic frequency conversion in a silica toroid microcavity. Taking advantage of the instantaneous response of the Kerr effect, we achieved adiabatic frequency conversion with a controllable amount of frequency shift and time width. In addition, thanks to the combination of the Kerr effect and the ultrahigh Q (>107) of the silica toroid microcavity, we also observed multiple frequency conversion within a photon lifetime. Furthermore, use of the Kerr effect allowed us to investigate the influence of the relative phase between the original and converted light.

DOI
10.1364/ol.41.005482

Related papers

Demonstration of all-optical tunable buffering using coupled ultra-high-Q silica toroid microcavities

Wataru Yoshiki, Yoshihiro Honda, Tomohiro Tetsumoto +3 more

We describe the first experimental demonstration of all-optical tunable buffering with coupled silica toroid microcavities. We prove that a 10-ns optical pulse can be buffered for 20 ns thanks to the microcavities’ ultra-high Q factor.

Conference on Lasers and Electro-Optics•Jan 1, 2017•0 citations

Nonlinear frequency conversion is controlled by vacuum fluctuations

Emre Yüce, Georgios Ctistis, Julien Claudon +2 more

Ever since the advent of nonlinear optics, the generation of light by frequency-conversion is drawing continued attention, and leading to emerging applications such as supercontinuum sources for ultra stable clocks and advanced microscopy. A modern approach to frequency-conversion is to switch light confined in micro- and nanocavity resonances to enable on-chip operation. Supposedly, nonlinear frequency conversion in such confined media differs from traditional non-linear optics in three key features regarding output spectrum, frequency shift, and critical time scale. Therefore, we switch GaAs-AlAs microcavities by the electronic Kerr effect, and study a range of quality factors to bridge the confined and the traditional non-linear regimes. We uncover the key role of the density of vacuum fluctuations, i.e., the local density of optical states (LDOS) for newly generated frequencies, a concept inspired by cavity quantum electrodynamics (cQED). As a result, we succeed to establish a framework, which not only describes nonlinear optics both in traditional bulk and in confined media but also opens a new control dimension in changing the color of light.

arXiv:1406.3586•Jun 13, 2014•1 citation

All-optical tunable buffering with coupled ultra-high Q whispering gallery mode microcavities

Wataru Yoshiki, Yoshihiro Honda, Tomohiro Tetsumoto +3 more

Abstract All-optical tunable buffering was recently achieved on a chip by using dynamically tuned coupled mode induced transparency, which is an optical analogue of electromagnetically induced transparency. However, the small Q s of about 105 used in those systems were limiting the maximum buffering time to a few hundred ps. Although employing an ultra-high Q whispering gallery mode (WGM) microcavity can significantly improve the maximum buffering time, the dynamic tuning of the WGM has remained challenging because thermo-optic and pressure tunings, which are widely used for WGM microcavities, have a very slow response. Here we demonstrate all-optical tunable buffering utilizing coupled ultra-high Q WGM cavities and the Kerr effect. The Kerr effect can change the refractive index instantaneously, and this allowed us to tune the WGM cavity very quickly. In addition, from among the various WGM cavities we employed a silica toroid microcavity for our experiments because it has an ultra-high Q factor (>2 × 107) and a small mode volume, and can be fabricated on a chip. Use of the Kerr effect and the silica toroid microcavity enabled us to observe an on-chip all-optical tunable buffering operation and achieve a maximum buffering time of 20 ns.

Scientific Reports•Aug 31, 2017•29 citations

Nonlinear frequency conversion of light inside a microcavity

Emre Yüce

Changing the color of light in a small mode volume is essential for applications that require on-chip operation. Microcavities are profound structures given their property to confine light in a small mode volume. Here, I numerically investigate the frequency conversion of light in a microcavity and show that the frequency converted light intensity is distinguished from an open medium such as an optical fiber or a nonlinear crystal. I observe that the frequency converted light intensity increases with increased rate of change of the refractive index of the microcavity. Notably, this study shows that the intensity of the frequency converted light is maximized when the duration of the index perturbation is matched to the cavity storage time. The results provide a set of optimum parameters for increasing frequency conversion efficiency inside a microcavity.

TURKISH JOURNAL OF PHYSICS•Apr 8, 2019•0 citations

Analysis of bistable memory in silica toroid microcavity

Wataru Yoshiki, Takasumi Tanabe

We model the nonlinear response of a silica toroid microcavity using coupled mode theory and a finite element method, and successfully obtain Kerr bistable operation that does not suffer from thermo-optic effect by optimizing the fiber-cavity coupling. Our analysis shows it is possible to demonstrate a Kerr bistable memory with a memory holding time of 500 ns at an extremely low energy consumption.

arXiv:1208.1124•Journal of the Optical Society of America B•Nov 16, 2012•16 citations

Dynamics of frequency conversion of an optical pulse in a microcavity

J. C. Martinez

Although it is known that the nonlinear Schr\"odinger equation describes the propagation of light in self-focusing media, the quantization conditions that emerge from its corresponding semiclassical version have not been sufficiently appreciated. For the propagation of an optical pulse in a Kerr-effect microcavity, we find that the transverse energy, intensity, number of particles, and frequency detuning are not arbitrary but are interrelated by quantization conditions. We identify the binding energy of the collective bound state of particles with the energy loss of the pulse and indicate how the energy distribution of photons can be studied from the point of view of a master-equation approach to a heat reservoir interacting with the photons.

Physical Review A•Jan 5, 2005•6 citations
In this Letter, we report, based on our knowledge, the first demonstration of Kerr-induced adiabatic frequency conversion in a silica toroid microcavity. Taking advantage of the instantaneous response of the Kerr effect, we achieved adiabatic frequency conversion with a controllable amount of frequency shift and time width. In addition, thanks to the combination of the Kerr effect and the ultrahigh Q (>107) of the silica toroid microcavity, we also observed multiple frequency conversion within a photon lifetime. Furthermore, use of the Kerr effect allowed us to investigate the influence of the relative phase between the original and converted light.
Ever since the advent of nonlinear optics, the generation of light by frequency-conversion is drawing continued attention, and leading to emerging applications such as supercontinuum sources for ultra stable clocks and advanced microscopy. A modern approach to frequency-conversion is to switch light confined in micro- and nanocavity resonances to enable on-chip operation. Supposedly, nonlinear frequency conversion in such confined media differs from traditional non-linear optics in three key features regarding output spectrum, frequency shift, and critical time scale. Therefore, we switch GaAs-AlAs microcavities by the electronic Kerr effect, and study a range of quality factors to bridge the confined and the traditional non-linear regimes. We uncover the key role of the density of vacuum fluctuations, i.e., the local density of optical states (LDOS) for newly generated frequencies, a concept inspired by cavity quantum electrodynamics (cQED). As a result, we succeed to establish a framework, which not only describes nonlinear optics both in traditional bulk and in confined media but also opens a new control dimension in changing the color of light.
Abstract All-optical tunable buffering was recently achieved on a chip by using dynamically tuned coupled mode induced transparency, which is an optical analogue of electromagnetically induced transparency. However, the small Q s of about 105 used in those systems were limiting the maximum buffering time to a few hundred ps. Although employing an ultra-high Q whispering gallery mode (WGM) microcavity can significantly improve the maximum buffering time, the dynamic tuning of the WGM has remained challenging because thermo-optic and pressure tunings, which are widely used for WGM microcavities, have a very slow response. Here we demonstrate all-optical tunable buffering utilizing coupled ultra-high Q WGM cavities and the Kerr effect. The Kerr effect can change the refractive index instantaneously, and this allowed us to tune the WGM cavity very quickly. In addition, from among the various WGM cavities we employed a silica toroid microcavity for our experiments because it has an ultra-high Q factor (>2 × 107) and a small mode volume, and can be fabricated on a chip. Use of the Kerr effect and the silica toroid microcavity enabled us to observe an on-chip all-optical tunable buffering operation and achieve a maximum buffering time of 20 ns.
Changing the color of light in a small mode volume is essential for applications that require on-chip operation. Microcavities are profound structures given their property to confine light in a small mode volume. Here, I numerically investigate the frequency conversion of light in a microcavity and show that the frequency converted light intensity is distinguished from an open medium such as an optical fiber or a nonlinear crystal. I observe that the frequency converted light intensity increases with increased rate of change of the refractive index of the microcavity. Notably, this study shows that the intensity of the frequency converted light is maximized when the duration of the index perturbation is matched to the cavity storage time. The results provide a set of optimum parameters for increasing frequency conversion efficiency inside a microcavity.
Although it is known that the nonlinear Schr\"odinger equation describes the propagation of light in self-focusing media, the quantization conditions that emerge from its corresponding semiclassical version have not been sufficiently appreciated. For the propagation of an optical pulse in a Kerr-effect microcavity, we find that the transverse energy, intensity, number of particles, and frequency detuning are not arbitrary but are interrelated by quantization conditions. We identify the binding energy of the collective bound state of particles with the energy loss of the pulse and indicate how the energy distribution of photons can be studied from the point of view of a master-equation approach to a heat reservoir interacting with the photons.