Ever since the advent of nonlinear optics, the generation of light by frequency-conversion is drawing continued attention, and leading to emerging applications such as supercontinuum sources for ultra stable clocks and advanced microscopy. A modern approach to frequency-conversion is to switch light confined in micro- and nanocavity resonances to enable on-chip operation. Supposedly, nonlinear frequency conversion in such confined media differs from traditional non-linear optics in three key features regarding output spectrum, frequency shift, and critical time scale. Therefore, we switch GaAs-AlAs microcavities by the electronic Kerr effect, and study a range of quality factors to bridge the confined and the traditional non-linear regimes. We uncover the key role of the density of vacuum fluctuations, i.e., the local density of optical states (LDOS) for newly generated frequencies, a concept inspired by cavity quantum electrodynamics (cQED). As a result, we succeed to establish a framework, which not only describes nonlinear optics both in traditional bulk and in confined media but also opens a new control dimension in changing the color of light.
Ever since the advent of nonlinear optics, the generation of light by frequency-conversion is drawing continued attention, and leading to emerging applications such as supercontinuum sources for ultra stable clocks and advanced microscopy. A modern approach to frequency-conversion is to switch light confined in micro- and nanocavity resonances to enable on-chip operation. Supposedly, nonlinear frequency conversion in such confined media differs from traditional non-linear optics in three key features regarding output spectrum, frequency shift, and critical time scale. Therefore, we switch GaAs-AlAs microcavities by the electronic Kerr effect, and study a range of quality factors to bridge the confined and the traditional non-linear regimes. We uncover the key role of the density of vacuum fluctuations, i.e., the local density of optical states (LDOS) for newly generated frequencies, a concept inspired by cavity quantum electrodynamics (cQED). As a result, we succeed to establish a framework, which not only describes nonlinear optics both in traditional bulk and in confined media but also opens a new control dimension in changing the color of light.
Recent advances in nonlinear nanophotonics have enabled optical frequency conversion at energy scales remarkably close to the few-photon regime of quantum optics. A key technique in these efforts is dispersion engineering, allowing dynamical confinement of light into ultrashort pulses with high peak intensities. In this talk, we explore quantum effects expected to emerge in next-generation devices, with a focus on understanding how these phenomena interplay with the multimode physics of femtosecond pulses. Drawing inspiration from recent experiments in thin-film lithium-niobate nanophotonics, we present several numerical studies of broadband frequency conversion in chi(2)-nonlinear waveguides. Our analysis provides a detailed understanding of the dynamics and modal structure of quantum noise and entanglement, e.g., in parametric and supercontinuum generation. This talk also surveys some recent results we obtained for harnessing exotic quantum non-Gaussian states of light in ultrafast nonlinear nanophotonics. Proper engineering of these quantum effects may generate entirely new functionalities for nonlinear optics at and beyond the classical-quantum transition.
Changing the color of light in a small mode volume is essential for applications that require on-chip operation. Microcavities are profound structures given their property to confine light in a small mode volume. Here, I numerically investigate the frequency conversion of light in a microcavity and show that the frequency converted light intensity is distinguished from an open medium such as an optical fiber or a nonlinear crystal. I observe that the frequency converted light intensity increases with increased rate of change of the refractive index of the microcavity. Notably, this study shows that the intensity of the frequency converted light is maximized when the duration of the index perturbation is matched to the cavity storage time. The results provide a set of optimum parameters for increasing frequency conversion efficiency inside a microcavity.
Understanding the effect of noise on light’s behavior is crucial, as light plays a central role in the study of many systems. This thesis explores the interplay between light, matter, and noise, demonstrating how this interaction can lead to fascinating phenomena and practical applications in sensing, signal transmission, and computing. Chapter 1 provides an overview of the history of noise in physical systems and fundamental discoveries that shaped our understanding of noisy systems. The focus then shifts to optical systems, particularly nanophotonic sensors and devices, and introduces a basic model describing nonlinear optical resonators, pivotal in modern photonics. Chapter 2 delves into the stochastic dynamics of light in a coherently-driven Kerr-nonlinear optical cavity, drawing analogies between light dynamics in the cavity and Brownian particles in a scalar potential. While this analogy holds in linear, on-resonance conditions, it breaks down in nonlinear or off-resonance scenarios due to non-conservative forces. An effective equilibrium description is proposed, providing accurate results in limited regimes but failing in deep bistability. This breakdown is marked by significant changes in the intra-cavity field fluctuation spectrum. Our findings lay the groundwork for an effective thermodynamic description of coherently driven cavities, bridging stochastic thermodynamics and resonant optics. Chapter 3 introduces an innovative optical sensing approach using a single-mode Kerr-nonlinear resonator, achieving exceptional precision at a square-root singularity. This sensor leverages the dynamic hysteresis of the resonator, with intensity splitting at hysteresis endpoints scaling with the square root of perturbation strength. This novel method enhances sensing precision even in noisy environments and overcomes the traditional trade-off between precision and averaging time. Chapter 4 presents the first experimental demonstration of non-Markovian stochastic resonance (SR), showing how memory effects from a non-instantaneous nonlinear response can broaden the SR bandwidth significantly. We imprint a signal on a laser by modulating the cavity length of a thermo-optical cavity. SR is evidenced by a peak in the signal-to-noise ratio as a function of noise variance. Our insights suggest broader implications for noise-assisted processes in various natural and engineered systems with a non-instantaneous response. Chapter 5 and 6 explore complex dynamics emerging from memory effects in nonlinear resonators. Memory effects lead to stable limit cycles and self-sustained oscillations, both in nonlinear optical and mechanical systems. We demonstrate that memory effects can greatly enhance the ability of a nonlinear mechanical resonator to harvest energy from ambient vibrations. Chapter 7 challenges the belief that enhancing clock precision requires more energy, demonstrating that precision can be altered at constant energy by varying laser-cavity detuning in a laser-driven thermo-optical dimer. Stochastic simulations show that detuning changes the limit cycle's confining potential and the phase diffusion strength, explaining the changes in precision. Finally, Chapter 8 demonstrates enhanced performance of an all-optical flip-flop by leveraging noise, reducing switching energy by approximately 90% while maintaining 95% reliability. This approach uses noise as a resource, improving energy efficiency and reliability in optical systems and potentially extending to other platforms. Our findings pave the way for computational devices utilizing ambient fluctuations as a resource.
Nonlinear optical effects such as frequency conversion form the basis for many practical light sources. In a variety of settings, the performance of such sources is limited by quantum noise. In many nonlinear systems, this quantum noise gets strongly amplified, as a result of the large sensitivity of the nonlinear dynamics to changes in the initial conditions - a feature common to many nonlinear systems. Here, we develop a general theory of quantum noise resulting from nonlinear dynamics initiated by many-photon Gaussian quantum states. The theory provides guidelines to find the optimal quantum state to inject to maximally suppress the noise at the output. As a concrete example of the concept and theory, we consider the nonlinear optical phenomenon of supercontinuum generation by a femtosecond pulse, a famously noise-generating process, which is important in a range of applications in materials characterization and life science. By seeding supercontinuum generation with pulsed squeezed vacuum, one can achieve order-of-magnitude magnitude reduction of intensity and phase noise simultaneously, over a broad band of wavelengths, passively, and with no change in spectrum. The large magnitude and bandwidth of this effect is challenging to achieve by other means of stabilization, pointing to a promising approach for controlling quantum noise in a variety of nonlinear systems.
The theory of non-resonant optical processes with intrinsic optical nonlinearity, such as harmonic generation, has been widely understood since the advent of the laser. In general, such effects involve multiphoton interactions that change the population of each input optical mode or modes. However, nonlinear effects can also arise through the input of an off-resonant laser beam that itself emerges unchanged. Many such effects have been largely overlooked. Using a quantum electrodynamical framework, this review provides detail on such optically nonlinear mechanisms that allow for a controlled increase or decrease in the intensity of linear absorption and fluorescence and in the efficiency of resonance energy transfer. The rate modifications responsible for these effects were achieved by the simultaneous application of an off-resonant beam with a moderate intensity, acting in a sense as an optical catalyst, conferring a new dimension of optical nonlinearity upon photoactive materials. It is shown that, in certain configurations, these mechanisms provide the basis for all-optical switching, i.e., the control of light-by-light, including an optical transistor scheme. The conclusion outlines other recently proposed all-optical switching systems.
The recent advent of optical metasurfaces, ultra-thin structures composed of nanoresonators facilitating strong light concentration [1–3], opens the path towards efficient \nfrequency conversion [4–7] in a material thousand times thinner than a human hair [8]. \nThere is a remarkable capacity to individually shape each nanoresonator of the metasurface to spatially and spectrally control the conversion process with unprecedented \nnanoscale resolution, facilitating an ultimate flexibility to selectively convert, focus, \nand image different colours with a single metasurface. The strong enhancement of the \nnonlinear processes in dielectric nanoresonators is largely due to the absence of material \nabsorption and the excitation of Mie-type bulk resonances [2]. The highest conversion \nefficiency to date has been achieved employing III-V semiconductor nanostructures, \nsuch as AlGaAs which is a non-centrosymmetric material with high quadratic nonlinear \nsusceptibility. In particular, second-harmonic generation efficiencies up to 10−4 have \nbeen recently demonstrated [8–12], six orders of magnitude higher than in plasmonics. \nSuch capabilities can make an immense fundamental and practical impact, including \nthe quantum state generation in nonlinear metasurfaces as we discuss in this chapter. \nThe quantum state of correlated photon-pairs is the essential building block for photon entanglement [13, 14], which underpins many quantum applications, including secure networks, enhanced measurement and lithography, and quantum information processing [15]. One of the most versatile techniques for the generation of correlated photons is the process of spontaneous parametric down-conversion (SPDC) [16, 17], see \nFig. 1. It allows for an arbitrary choice of energy and momentum correlations between \nthe generated photons, robust operation at room temperature, as well as for spatial and \ntemporal coherence between simultaneously pumped multiple SPDC sources. Alternative approaches based on atom-like single photon emitters, such as solid-state fluorescent atomic defects [18], quantum dots [19, 20], and 2D host materials [21, 22], have \nreached a high degree of frequency indistinguishability, purity and brightness [19, 20]. \nHowever, this comes with the expense of operation at cryogenic temperatures and lack \nof spatial coherence between multiple quantum emitters. These features might limit \npossible applications and reduce the potential for device scalability. Furthermore, the \nsmall size of the atomic sources often requires complex schemes aimed at coupling to \noptical nanoantennas and improving the photon extraction efficiency [21]. \nThe miniaturization of SPDC quantum-light sources to micro and nanoscale dimensions is a continuing quest, as it enables denser integration of functional quantum \ndevices. Traditionally, bulky cm-sized crystals were utilized for SPDC, entailing the \ndifficulty of aligning multiple optical elements after the SPDC crystal, while offering \nrelatively low photon-pair rates [17]. As a first step of miniaturization, SPDC was \nrealized in low-index-contrast waveguides, which allowed confining light down to several square micrometers transversely to the propagation direction, significantly enhancing the conversion efficiency [23]. However, this approach still requires centimetres \nof propagation length, which makes the on-chip integration with other elements challenging [24]. The introduction of high-index contrast waveguides and ring resonators \nallowed for shrinking the sizes necessary for SPDC to millimetres [25], and to tens \nof micrometers [26]. However, further miniaturisation down to the metasurfaces composed of nanoresonators requires conceptually different approaches.