Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

TURKISH JOURNAL OF PHYSICS

Nonlinear frequency conversion of light inside a microcavity

Emre Yüce

Published Apr 8, 2019• 0 citations
Publisher

Abstract

Changing the color of light in a small mode volume is essential for applications that require on-chip operation. Microcavities are profound structures given their property to confine light in a small mode volume. Here, I numerically investigate the frequency conversion of light in a microcavity and show that the frequency converted light intensity is distinguished from an open medium such as an optical fiber or a nonlinear crystal. I observe that the frequency converted light intensity increases with increased rate of change of the refractive index of the microcavity. Notably, this study shows that the intensity of the frequency converted light is maximized when the duration of the index perturbation is matched to the cavity storage time. The results provide a set of optimum parameters for increasing frequency conversion efficiency inside a microcavity.

DOI
10.3906/fiz-1901-23

Related papers

Nonlinear frequency conversion is controlled by vacuum fluctuations

Emre Yüce, Georgios Ctistis, Julien Claudon +2 more

Ever since the advent of nonlinear optics, the generation of light by frequency-conversion is drawing continued attention, and leading to emerging applications such as supercontinuum sources for ultra stable clocks and advanced microscopy. A modern approach to frequency-conversion is to switch light confined in micro- and nanocavity resonances to enable on-chip operation. Supposedly, nonlinear frequency conversion in such confined media differs from traditional non-linear optics in three key features regarding output spectrum, frequency shift, and critical time scale. Therefore, we switch GaAs-AlAs microcavities by the electronic Kerr effect, and study a range of quality factors to bridge the confined and the traditional non-linear regimes. We uncover the key role of the density of vacuum fluctuations, i.e., the local density of optical states (LDOS) for newly generated frequencies, a concept inspired by cavity quantum electrodynamics (cQED). As a result, we succeed to establish a framework, which not only describes nonlinear optics both in traditional bulk and in confined media but also opens a new control dimension in changing the color of light.

arXiv:1406.3586•Jun 13, 2014•1 citation

Optical bistability of a nonlinear microcavity

Meiping Jiang

Based on Fabry-Perot cavity's theories and efficiency refractive index,the optical bistability of a nonlinear microcavity is studied,and the corresponding mathematical formula are deduced.The theoretical curves are well fitted with those of numerical simulation in other papers.The investigation shows that appropriate frequency-shifting should be preset on the incident light in order to produce bistability for a nonlinear system.If the system is composed of focusing nonlinear medium,the frequency must be redshifted, otherwise it must be blue-shifted.The magnitude of critical shifting is 0.866 times of the width of microcavity resonance mode.

Chinese Journal of Quantum Electronics•Jan 1, 2009•1 citation

Wavelength conversion via dynamic refractive index tuning of a cavity

Masaya Notomi, Satoshi Mitsugi

We demonstrate numerically that the wavelength conversion of light is possible by the simple dynamic refractive index tuning of an optical cavity in a photonic crystal. We also clarify the mechanism and conservation rule for this conversion process. In addition, we discuss the observability of this phenomenon in realistic cavities. Our results indicate that this linear adiabatic wavelength conversion process can be observed for various high-$Q$ microcavities.

Physical Review A•May 11, 2006•231 citations

Photon conversion processes in dispersive microcavities: Quantum-field model

Alex Hayat, Meir Orenstein

We present a simple quantum-field model for photon frequency conversion processes in dispersive dielectric microcavities, allowing practical calculations of conversion rates and efficiency optimization. The model incorporates the effect of dispersion into the structure of spatial cavity eigenmodes, while the material nonlinear properties enter the calculations through the coupling coefficients. Similar to the radiative atomic transitions, cavity photon-to-photon decay rates are derived for stimulated and spontaneous photon conversion. The phase matching requirement for a nonlinear process in a cavity is shown to be translated into a nonlinear mode overlap, manifesting the momentum conservation in a $k$ space spanned by the cavity eigenmodes. We illustrate the efficiency of the model by calculating degenerate two-photon and three-photon parametric down-conversion rates and analyze the photon lifetime dependence on various cavity and material parameters.

Physical Review A•Jan 28, 2008•13 citations

Frequency down-conversion through Bose condensation of light

Patrick Navez

We propose an experimental setup allowing one to convert an input light of wavelengths about $1--2\ensuremath{\mu}\mathrm{m}$ into an output light of a lower frequency. The basic principle of operation relies on the nonlinear optical properties exhibited by a microcavity filled with a photonic bandgap material. The light inside this material behaves like an interacting Bose gas susceptible to reach thermal equilibrium and create a Bose-Einstein condensate. Theoretical estimations show that using a fiber grating, a conversion of $1\ensuremath{\mu}\mathrm{m}$ into $1.5\ensuremath{\mu}\mathrm{m}$ is achieved with an input pulse of about 1 ns, and characterized by a peak power of ${10}^{3}\mathrm{W}.$

arXiv:quant-ph/0209077•Physical Review A•Jul 11, 2003•9 citations

Optical bistable behavior involving photonic crystals nonlinear cavity

K. F. Deng, Du Fang Shi

We present an analytical model and numerical experiments to describe optimal bistable switching involving photonic crystals nonlinear cavity. The involving photonic crystals nonlinear cavity is particularly suitable for large-scale all-optical integration. It is interesting to show that the refractive index of the system can be altered by the incident intensity when the incident frequency is tuned to the evanescent mode and the cavity contains a nonlinear Kerr medium. The response of this system to high-intensity incident waves is studied in detail. A cavity host a localized mode at 1.55 um with a Q of 4000 and a mode volume of 0.055 um3, we predict the onset of bistable reflection at incident powers of ~40 mW. The downstream reflections lead to hysteresis loops in the reflectivity that are topologically distinct from conventional Lorentzian-derived loops characteristic of isolated Fabry-Perot cavities. We provide a stability argument that reveals the unstable branches of these unique hysteresis loops, and we illustrate some of the rich bistable behaviors that can be engineered with such downstream sources, this fact may be used to obtain more flexibility in designing nonlinear devices.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 11, 2005•0 citations
Changing the color of light in a small mode volume is essential for applications that require on-chip operation. Microcavities are profound structures given their property to confine light in a small mode volume. Here, I numerically investigate the frequency conversion of light in a microcavity and show that the frequency converted light intensity is distinguished from an open medium such as an optical fiber or a nonlinear crystal. I observe that the frequency converted light intensity increases with increased rate of change of the refractive index of the microcavity. Notably, this study shows that the intensity of the frequency converted light is maximized when the duration of the index perturbation is matched to the cavity storage time. The results provide a set of optimum parameters for increasing frequency conversion efficiency inside a microcavity.
Ever since the advent of nonlinear optics, the generation of light by frequency-conversion is drawing continued attention, and leading to emerging applications such as supercontinuum sources for ultra stable clocks and advanced microscopy. A modern approach to frequency-conversion is to switch light confined in micro- and nanocavity resonances to enable on-chip operation. Supposedly, nonlinear frequency conversion in such confined media differs from traditional non-linear optics in three key features regarding output spectrum, frequency shift, and critical time scale. Therefore, we switch GaAs-AlAs microcavities by the electronic Kerr effect, and study a range of quality factors to bridge the confined and the traditional non-linear regimes. We uncover the key role of the density of vacuum fluctuations, i.e., the local density of optical states (LDOS) for newly generated frequencies, a concept inspired by cavity quantum electrodynamics (cQED). As a result, we succeed to establish a framework, which not only describes nonlinear optics both in traditional bulk and in confined media but also opens a new control dimension in changing the color of light.
Based on Fabry-Perot cavity's theories and efficiency refractive index,the optical bistability of a nonlinear microcavity is studied,and the corresponding mathematical formula are deduced.The theoretical curves are well fitted with those of numerical simulation in other papers.The investigation shows that appropriate frequency-shifting should be preset on the incident light in order to produce bistability for a nonlinear system.If the system is composed of focusing nonlinear medium,the frequency must be redshifted, otherwise it must be blue-shifted.The magnitude of critical shifting is 0.866 times of the width of microcavity resonance mode.
We demonstrate numerically that the wavelength conversion of light is possible by the simple dynamic refractive index tuning of an optical cavity in a photonic crystal. We also clarify the mechanism and conservation rule for this conversion process. In addition, we discuss the observability of this phenomenon in realistic cavities. Our results indicate that this linear adiabatic wavelength conversion process can be observed for various high-QQQ microcavities.
We present a simple quantum-field model for photon frequency conversion processes in dispersive dielectric microcavities, allowing practical calculations of conversion rates and efficiency optimization. The model incorporates the effect of dispersion into the structure of spatial cavity eigenmodes, while the material nonlinear properties enter the calculations through the coupling coefficients. Similar to the radiative atomic transitions, cavity photon-to-photon decay rates are derived for stimulated and spontaneous photon conversion. The phase matching requirement for a nonlinear process in a cavity is shown to be translated into a nonlinear mode overlap, manifesting the momentum conservation in a kkk space spanned by the cavity eigenmodes. We illustrate the efficiency of the model by calculating degenerate two-photon and three-photon parametric down-conversion rates and analyze the photon lifetime dependence on various cavity and material parameters.
We propose an experimental setup allowing one to convert an input light of wavelengths about $1--2\ensuremath{\mu}\mathrm{m}$ into an output light of a lower frequency. The basic principle of operation relies on the nonlinear optical properties exhibited by a microcavity filled with a photonic bandgap material. The light inside this material behaves like an interacting Bose gas susceptible to reach thermal equilibrium and create a Bose-Einstein condensate. Theoretical estimations show that using a fiber grating, a conversion of $1\ensuremath{\mu}\mathrm{m}$ into $1.5\ensuremath{\mu}\mathrm{m}$ is achieved with an input pulse of about 1 ns, and characterized by a peak power of 103W.{10}^{3}\mathrm{W}.103W.
We present an analytical model and numerical experiments to describe optimal bistable switching involving photonic crystals nonlinear cavity. The involving photonic crystals nonlinear cavity is particularly suitable for large-scale all-optical integration. It is interesting to show that the refractive index of the system can be altered by the incident intensity when the incident frequency is tuned to the evanescent mode and the cavity contains a nonlinear Kerr medium. The response of this system to high-intensity incident waves is studied in detail. A cavity host a localized mode at 1.55 um with a Q of 4000 and a mode volume of 0.055 um3, we predict the onset of bistable reflection at incident powers of ~40 mW. The downstream reflections lead to hysteresis loops in the reflectivity that are topologically distinct from conventional Lorentzian-derived loops characteristic of isolated Fabry-Perot cavities. We provide a stability argument that reveals the unstable branches of these unique hysteresis loops, and we illustrate some of the rich bistable behaviors that can be engineered with such downstream sources, this fact may be used to obtain more flexibility in designing nonlinear devices.