Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

WORLD SCIENTIFIC eBooks

SUPERCONDUCTING DETECTORS FOR MM AND SUB-MM WAVES

D. WINKLER, Z. G. Ivanov, T. Claeson

Published Jul 1, 1991• 3 citations
Publisher

Abstract

Superconducting tunnel junctions may be used in a number of high frequency devices. Two non-linear effects are employed: the sharp rise in the quasiparticle current at the gap voltage and the highly non-linear Josephson relations. A brief review of high frequency applications, mainly based on Josephson tunneling, is given. The successful SIS mixer is treated in detail and state-of-the-art results are quoted. The use of Nb-based tunnel junctions as SIS mixer elements is surveyed. High T c superconductors give possibilities of extending the operating frequency and temperature of high frequency detectors. However, stringent tunnel junction requirements have to be met. For example, the critical current density of the junction has to exceed 10 5 A/cm 2 for use in the THz regime. Present day junction technology employing high T c superconductors is shortly reviewed. Several methods give I c R N values larger than 1 mV for weak link junctions.

DOI
10.1142/9789814360272_0003

Related papers

High-frequency limits of superconducting tunnel junction mixers

Dag Winkler, T. Claeson

We have investigated high-frequency limits of superconducting quasiparticle mixers from experiments on Al/Al-oxide-In/Al (or Ag) tunnel junctions, and from calculations based on Tucker’s quantum theory of mixing (QTM). The small superconducting energy gap of Al enabled us to study mixer performance at around the junction gap frequency, fg =(Δ1+Δ2)/h≊87 GHz, of superconductor-insulator-superconductor (SIS) mixers, and at twice the junction gap frequency for S-I-normal metal (SIN) mixers ( fg =Δ1/h) with available millimeter wave sources. Because of the low transition temperature of Al (Tc ≊1.3 K), a dilution refrigerator was used for providing temperatures below 1 K. The best mixer conversion efficiency was obtained for a low-resistance (∼34 Ω) six-junction array SIS mixer operated at f/fg ≊1 (in this case 73 GHz). The coupled single sideband conversion gain (with no image rejection) was −13.8 dB and the available conversion gain was estimated to −8.4 dB. Complicating nonequilibrium phenomena made it difficult to compare the performance of these relatively high-current-density mixers to the QTM. However, good agreement between calculated and corresponding measured conversion efficiencies and dynamic resistance values was obtained for the low-current-density mixers. Noise due to switching between rf-induced Josephson steps and interference from Josephson mixing could be quenched by a magnetic field. Several high-frequency limits are considered in this paper (such as Josephson switching noise, nonequilibrium phenomena, pair breaking, and energy gap limitations). Our results indicate that submillimeter wave SIS mixer receivers are likely to perform well, at least up to their gap frequencies, i.e., the THz region for large gap superconductors. Our QTM calculations showed that conversion gain larger than unity should be possible up to twice the gap frequency. Above this frequency the conversion loss will increase rapidly.

Journal of Applied Physics•Dec 1, 1987•35 citations

NBN JOSEPHSON AND TUNNEL JUNCTIONS FOR SPACE THZ OBSERVATION AND SIGNAL PROCESSING

Romano Setzu, N. Hadacek, Vincent Larrey +2 more

ABSTRACT: Active superconducting circuits based on picoseconds switching, i.e. THz oscillating, Josephson tunnel junctions are expected to find a large domain of applications in spatial sub-millimeter wave and FIR detectors as well as in satellite based wideband signal and data processors. In the first case SIS (superconductor-insulator-superconductor) tunnel junctions are required, while in the second case SNS (superconductor-normal metal-superconductor) self-shunted junctions are preferred. We present the advantages of the nitride junction technology currently developed at CEA-Grenoble, based on high-performance MTS (medium temperature superconductor) NbN films in both SIS and SNS junctions. In the SIS case the device performances rely on a sputter deposited and post-annealed, only 0.5-0.7 nm thick, dielectric MgO barrier. This leads to junctions with a Josephson critical current in the range of 10-25 kA/cm, and a large superconducting energy gap (> 5 meV) associated with a low sub-gap quasi-particle leakage current. These parameters are suitable for low “noise temperature ” heterodyne mixers, local oscillators, and integrated receivers in the 0.8 to 1.4 THz frequency range. In the SNS case, a new

•Jul 13, 2005•1 citation

Coupled Josephson Local Oscillator And Detector Experiments In The Terahertz Regime

R. P. Robertazzi, Hans D. Hallen, Robert A. Buhrman

Recent coupled Josephson junction experiments in our laboratory have demonstrated that high critical current density tunnel junctions can serve as effective local oscillators at frequencies up to and in excess of the gap sum frequency of the junction, i.e. well above 1 Terahertz for a niobium or niobium compound tunnel junction. While the details of the behavior of such a THz. oscillator were found not to be in accord with the predictions of the accepted theory of the A.C. Josephson effect in the gap region significant radiation could be capacitively coupled from the oscillator junction to an adjacent junction, sufficient for SIS mixer experiments at Terahertz frequencies. Research efforts are now under way to further extend and ex-pand these studies. A high critical current density all NbN tunnel junction system is now under development for Terahertz applications and a new set of coupled Josephson oscillator - SIS detector experiments is being initiated using NbN tunnel junc-tions. In this paper we will review the original coupled junction high frequency experiments and report on the recent progress of the current NbN tunnel junction experiments.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 18, 1988•1 citation

Investigation of the Harmonic Mixer and Low-Frequency Converter Regimes in a Superconducting Tunnel Junction

K. V. Kalashnikov, Anton A. Artanov, Gert J. de Lange +1 more

We experimentally investigate different mixing regi-mes in Nb/AlOx/Nb and Nb/AlN/NbN tunnel superconductor-insulator-superconductor (SIS) junctions. The SIS mixers were studied with regard to the following modes of operation: in an extremely low-frequency range (0.1-20 GHz) and as high harmonic mixers; n ≈ 20-30 at signal frequencies of about 500 GHz that requires high power of a local oscillator. The quasiparticle and Josephson mixing regimes have been compared. We demonstrate that, in some applications requiring high conversion efficiency, the Josephson regime can be more preferable than the quasiparticle regime due to a larger output signal and better signal-to-noise ratio. As an example of such an application, we consider the phase locking of a THz oscillator using a cryogenic harmonic phase detector, which only ought to realize all of its benefits under the Josephson mixing regime. In addition, we demonstrate that the presence of the Josephson effect results in considerable increase in conversion efficiency at the expense of the dynamic range decrease; it was measured for low-frequency up- and down-convertors, which are promising for cryogenic multiplexing systems.

IEEE Transactions on Applied Superconductivity•Feb 6, 2018•6 citations

Millimeter and submillimeter wave mixers based on superconducting weak links

Janusz Konopka, I. Wolff

Principles of operation of superconducting mixers based on: Superconductor-Insulator-Superconductor (SIS) tunnel junctions, Josephson junctions in high temperature superconductors and on superconducting hot-electron-microbolometers are presented. Most recent results on all types of superconducting mixers, with special attention paid to noise properties is reviewed.

International Conference on Microwaves, Radar & Wireless Communications•Nov 27, 2002•0 citations

High frequency behaviour of coupled and uncoupled Josephson junctions based on high temperature superconductors

Jens Scherbel

Josephson junctions made from high temperature superconductors (HTS) are active high frequency devices which can be used as oscillators or frequency mixers in the submillimeter-wave region. The frequencies of these electromagnetic waves range from 300 GHz up to 3 THz. Up to now, this wave band is a relatively unexploited region of the electromagnetic spectrum because it is very difficult to produce and detect submillimeter-waves. However, submillimeter-wave technologies are becoming important in many practical scientific applications such as radio astronomy, atmospheric research, plasma diagnostics and THz-imaging, recently. In this work, the behaviour HTS Josephson junctions have been investigated experimentally and theoretically with the aim to THz-applications. In the first part the behaviour of intrinsic Josephson junction stacks are measured, and the possibility of phase locking is discussed by the theoretical analysis of two different shunt technologies depending on the parameter spread of the junction and the shunt parameters. It could be shown that stacks made from sputtered BSCCO layers does not act as intrinsic Josephson junction arrays because of their many micro shorts resulting from the layer growth. However, the stacks made from sputtered TBCCO show clear intrinsic Josephson junction behaviour. But their quasiparticle branches in the current-voltage characteristic deviate from the behaviour predicted by the common used RCSJ model. These branches can be discussed within a tunneling model using d-wave superconductor density of states. A temperature dependent current distribution and a zero bias anomaly was found. Furthermore, the coherent behaviour is studied for intrinsic arrays with additional side-wall shunts. The existence of thresholds of phase locking at especial junction and shunt parameters are demonstrated and discussed in regard to THz-oscillator applications. It was found that the Josephson junctions in a stack can be phase locked even if they have a parameter spread in the critical current up to 15% using a resonant shunt. In the second part of this work the mixing properties of HTS bicrystal Josephson junctions as wave guide mixers for 115 and 345 GHz have been investigated. (orig.)

•Jan 1, 2001•0 citations
Superconducting tunnel junctions may be used in a number of high frequency devices. Two non-linear effects are employed: the sharp rise in the quasiparticle current at the gap voltage and the highly non-linear Josephson relations. A brief review of high frequency applications, mainly based on Josephson tunneling, is given. The successful SIS mixer is treated in detail and state-of-the-art results are quoted. The use of Nb-based tunnel junctions as SIS mixer elements is surveyed. High T c superconductors give possibilities of extending the operating frequency and temperature of high frequency detectors. However, stringent tunnel junction requirements have to be met. For example, the critical current density of the junction has to exceed 10 5 A/cm 2 for use in the THz regime. Present day junction technology employing high T c superconductors is shortly reviewed. Several methods give I c R N values larger than 1 mV for weak link junctions.
We have investigated high-frequency limits of superconducting quasiparticle mixers from experiments on Al/Al-oxide-In/Al (or Ag) tunnel junctions, and from calculations based on Tucker’s quantum theory of mixing (QTM). The small superconducting energy gap of Al enabled us to study mixer performance at around the junction gap frequency, fg =(Δ1+Δ2)/h≊87 GHz, of superconductor-insulator-superconductor (SIS) mixers, and at twice the junction gap frequency for S-I-normal metal (SIN) mixers ( fg =Δ1/h) with available millimeter wave sources. Because of the low transition temperature of Al (Tc ≊1.3 K), a dilution refrigerator was used for providing temperatures below 1 K. The best mixer conversion efficiency was obtained for a low-resistance (∼34 Ω) six-junction array SIS mixer operated at f/fg ≊1 (in this case 73 GHz). The coupled single sideband conversion gain (with no image rejection) was −13.8 dB and the available conversion gain was estimated to −8.4 dB. Complicating nonequilibrium phenomena made it difficult to compare the performance of these relatively high-current-density mixers to the QTM. However, good agreement between calculated and corresponding measured conversion efficiencies and dynamic resistance values was obtained for the low-current-density mixers. Noise due to switching between rf-induced Josephson steps and interference from Josephson mixing could be quenched by a magnetic field. Several high-frequency limits are considered in this paper (such as Josephson switching noise, nonequilibrium phenomena, pair breaking, and energy gap limitations). Our results indicate that submillimeter wave SIS mixer receivers are likely to perform well, at least up to their gap frequencies, i.e., the THz region for large gap superconductors. Our QTM calculations showed that conversion gain larger than unity should be possible up to twice the gap frequency. Above this frequency the conversion loss will increase rapidly.
ABSTRACT: Active superconducting circuits based on picoseconds switching, i.e. THz oscillating, Josephson tunnel junctions are expected to find a large domain of applications in spatial sub-millimeter wave and FIR detectors as well as in satellite based wideband signal and data processors. In the first case SIS (superconductor-insulator-superconductor) tunnel junctions are required, while in the second case SNS (superconductor-normal metal-superconductor) self-shunted junctions are preferred. We present the advantages of the nitride junction technology currently developed at CEA-Grenoble, based on high-performance MTS (medium temperature superconductor) NbN films in both SIS and SNS junctions. In the SIS case the device performances rely on a sputter deposited and post-annealed, only 0.5-0.7 nm thick, dielectric MgO barrier. This leads to junctions with a Josephson critical current in the range of 10-25 kA/cm, and a large superconducting energy gap (> 5 meV) associated with a low sub-gap quasi-particle leakage current. These parameters are suitable for low “noise temperature ” heterodyne mixers, local oscillators, and integrated receivers in the 0.8 to 1.4 THz frequency range. In the SNS case, a new
Recent coupled Josephson junction experiments in our laboratory have demonstrated that high critical current density tunnel junctions can serve as effective local oscillators at frequencies up to and in excess of the gap sum frequency of the junction, i.e. well above 1 Terahertz for a niobium or niobium compound tunnel junction. While the details of the behavior of such a THz. oscillator were found not to be in accord with the predictions of the accepted theory of the A.C. Josephson effect in the gap region significant radiation could be capacitively coupled from the oscillator junction to an adjacent junction, sufficient for SIS mixer experiments at Terahertz frequencies. Research efforts are now under way to further extend and ex-pand these studies. A high critical current density all NbN tunnel junction system is now under development for Terahertz applications and a new set of coupled Josephson oscillator - SIS detector experiments is being initiated using NbN tunnel junc-tions. In this paper we will review the original coupled junction high frequency experiments and report on the recent progress of the current NbN tunnel junction experiments.
We experimentally investigate different mixing regi-mes in Nb/AlOx/Nb and Nb/AlN/NbN tunnel superconductor-insulator-superconductor (SIS) junctions. The SIS mixers were studied with regard to the following modes of operation: in an extremely low-frequency range (0.1-20 GHz) and as high harmonic mixers; n ≈ 20-30 at signal frequencies of about 500 GHz that requires high power of a local oscillator. The quasiparticle and Josephson mixing regimes have been compared. We demonstrate that, in some applications requiring high conversion efficiency, the Josephson regime can be more preferable than the quasiparticle regime due to a larger output signal and better signal-to-noise ratio. As an example of such an application, we consider the phase locking of a THz oscillator using a cryogenic harmonic phase detector, which only ought to realize all of its benefits under the Josephson mixing regime. In addition, we demonstrate that the presence of the Josephson effect results in considerable increase in conversion efficiency at the expense of the dynamic range decrease; it was measured for low-frequency up- and down-convertors, which are promising for cryogenic multiplexing systems.
Josephson junctions made from high temperature superconductors (HTS) are active high frequency devices which can be used as oscillators or frequency mixers in the submillimeter-wave region. The frequencies of these electromagnetic waves range from 300 GHz up to 3 THz. Up to now, this wave band is a relatively unexploited region of the electromagnetic spectrum because it is very difficult to produce and detect submillimeter-waves. However, submillimeter-wave technologies are becoming important in many practical scientific applications such as radio astronomy, atmospheric research, plasma diagnostics and THz-imaging, recently. In this work, the behaviour HTS Josephson junctions have been investigated experimentally and theoretically with the aim to THz-applications. In the first part the behaviour of intrinsic Josephson junction stacks are measured, and the possibility of phase locking is discussed by the theoretical analysis of two different shunt technologies depending on the parameter spread of the junction and the shunt parameters. It could be shown that stacks made from sputtered BSCCO layers does not act as intrinsic Josephson junction arrays because of their many micro shorts resulting from the layer growth. However, the stacks made from sputtered TBCCO show clear intrinsic Josephson junction behaviour. But their quasiparticle branches in the current-voltage characteristic deviate from the behaviour predicted by the common used RCSJ model. These branches can be discussed within a tunneling model using d-wave superconductor density of states. A temperature dependent current distribution and a zero bias anomaly was found. Furthermore, the coherent behaviour is studied for intrinsic arrays with additional side-wall shunts. The existence of thresholds of phase locking at especial junction and shunt parameters are demonstrated and discussed in regard to THz-oscillator applications. It was found that the Josephson junctions in a stack can be phase locked even if they have a parameter spread in the critical current up to 15% using a resonant shunt. In the second part of this work the mixing properties of HTS bicrystal Josephson junctions as wave guide mixers for 115 and 345 GHz have been investigated. (orig.)