Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Coupled Josephson Local Oscillator And Detector Experiments In The Terahertz Regime

R. P. Robertazzi, Hans D. Hallen, Robert A. Buhrman

Published May 18, 1988• 1 citation
Publisher

Abstract

Recent coupled Josephson junction experiments in our laboratory have demonstrated that high critical current density tunnel junctions can serve as effective local oscillators at frequencies up to and in excess of the gap sum frequency of the junction, i.e. well above 1 Terahertz for a niobium or niobium compound tunnel junction. While the details of the behavior of such a THz. oscillator were found not to be in accord with the predictions of the accepted theory of the A.C. Josephson effect in the gap region significant radiation could be capacitively coupled from the oscillator junction to an adjacent junction, sufficient for SIS mixer experiments at Terahertz frequencies. Research efforts are now under way to further extend and ex-pand these studies. A high critical current density all NbN tunnel junction system is now under development for Terahertz applications and a new set of coupled Josephson oscillator - SIS detector experiments is being initiated using NbN tunnel junc-tions. In this paper we will review the original coupled junction high frequency experiments and report on the recent progress of the current NbN tunnel junction experiments.

DOI
10.1117/12.943978

Related papers

NbN Josephson tunnel junctions for terahertz local oscillators

R. P. Robertazzi, Robert A. Buhrman

Rugged, high current density NbN1−xCx/MgO/NḃN1−xCx tunnel junctions have been fabricated and tested as voltage tunable Josephson junction terahertz oscillators. The emitted radiation from these junctions is detected on chip by a second junction which is capacitively coupled to the first. For oscillator junctions with a critical current density of Jc∼3.5×104 A/cm2 we find that the junction oscillates with a voltage amplitude of ∼1.5 mV. The detected rf voltage level remains essentially constant from 300 GHz to above 1 THz. The oscillator junction produces 0.5 μW of terahertz radiation of which, due to impedance mismatch, 0.01 μW is coupled into the detector junction.

Applied Physics Letters•Dec 12, 1988•15 citations

Coupled tunnel junction experiments at the gap frequency

R. P. Robertazzi, B. Hunt, Robert A. Buhrman

By using a capacitively coupled set of Josephson tunnel junctions we have performed experiments on the feasibility of using a Josephson junction as a local oscillator at frequencies up to and in excess of the gap sum of the junction. One junction was biased to serve as a local oscillator, whose AC power output could be monitored by observing the constant voltage Josephson steps on the current-voltage characteristic of the second junction. Using this coupling scheme we have coupled large oscillator signal levels (∼ 12.5nW) into the detector junction. For frequencies below the gap sum frequency our measurements are consistent with the Werthamer theory. For bias voltages above the gap sum we observe an anomalously fast roll off of the detected power from the oscillator junction.

IEEE Transactions on Magnetics•Mar 1, 1987•9 citations

NBN JOSEPHSON AND TUNNEL JUNCTIONS FOR SPACE THZ OBSERVATION AND SIGNAL PROCESSING

Romano Setzu, N. Hadacek, Vincent Larrey +2 more

ABSTRACT: Active superconducting circuits based on picoseconds switching, i.e. THz oscillating, Josephson tunnel junctions are expected to find a large domain of applications in spatial sub-millimeter wave and FIR detectors as well as in satellite based wideband signal and data processors. In the first case SIS (superconductor-insulator-superconductor) tunnel junctions are required, while in the second case SNS (superconductor-normal metal-superconductor) self-shunted junctions are preferred. We present the advantages of the nitride junction technology currently developed at CEA-Grenoble, based on high-performance MTS (medium temperature superconductor) NbN films in both SIS and SNS junctions. In the SIS case the device performances rely on a sputter deposited and post-annealed, only 0.5-0.7 nm thick, dielectric MgO barrier. This leads to junctions with a Josephson critical current in the range of 10-25 kA/cm, and a large superconducting energy gap (> 5 meV) associated with a low sub-gap quasi-particle leakage current. These parameters are suitable for low “noise temperature ” heterodyne mixers, local oscillators, and integrated receivers in the 0.8 to 1.4 THz frequency range. In the SNS case, a new

•Jul 13, 2005•1 citation

0.5-THz waveguide SIS mixers with NbN/AlN/NbN technology

Jing Li, Masanori Takeda, Zhen Wang +1 more

Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 29, 2007•3 citations

SUPERCONDUCTING DETECTORS FOR MM AND SUB-MM WAVES

D. WINKLER, Z. G. Ivanov, T. Claeson

Superconducting tunnel junctions may be used in a number of high frequency devices. Two non-linear effects are employed: the sharp rise in the quasiparticle current at the gap voltage and the highly non-linear Josephson relations. A brief review of high frequency applications, mainly based on Josephson tunneling, is given. The successful SIS mixer is treated in detail and state-of-the-art results are quoted. The use of Nb-based tunnel junctions as SIS mixer elements is surveyed. High T c superconductors give possibilities of extending the operating frequency and temperature of high frequency detectors. However, stringent tunnel junction requirements have to be met. For example, the critical current density of the junction has to exceed 10 5 A/cm 2 for use in the THz regime. Present day junction technology employing high T c superconductors is shortly reviewed. Several methods give I c R N values larger than 1 mV for weak link junctions.

WORLD SCIENTIFIC eBooks•Jul 1, 1991•3 citations

Toward terahertz heterodyne detection with superconducting Josephson junctions

N. Bergeal, M. Malnou, C. Feuillet-Palma +5 more

The terahertz region of the electromagnetic spectrum [0.3-10THz] has, so far, not been exploited fully due to the lack of suitable sources and detectors. Indeed, THz frequency lies between the frequency range of traditional electronics and photonics where the existing technology cannot be simply extended. SIS Niobium tunnel junctions that are currently used as mixing element in heterodyne receivers are intrinsically limited in frequency by the energy gap of Nb and operate only at low temperature (4.2K). An alternative to these devices consists of using High-Tc superconducting receivers. Over the past years, we have developed a new approach based on ion irradiation to make Josephson nano-junctions and SQUIDs with YBCO thin films [1,2]. In this talk, we will present a study of the high-frequency mixing properties of such junctions up to 400 GHz [3]. Conversion gain has been measured at frequencies spanning the range below and above the characteristic frequency fc = (2e/h)IcRn of the junctions. The transition between two distinct mixing regimes has been clearly evidenced, in good agreement with the prediction of the three ports model.[1] N. Bergeal et al., Appl. Phys. Lett. 87, 102502 (2005)[2] N. Bergeal et al., Appl. Phys. Lett. 89, 1112515 (2006)[3] Luo et al, arXiv:1203.1734 (2012)

Bulletin of the American Physical Society•Mar 19, 2013•0 citations
Recent coupled Josephson junction experiments in our laboratory have demonstrated that high critical current density tunnel junctions can serve as effective local oscillators at frequencies up to and in excess of the gap sum frequency of the junction, i.e. well above 1 Terahertz for a niobium or niobium compound tunnel junction. While the details of the behavior of such a THz. oscillator were found not to be in accord with the predictions of the accepted theory of the A.C. Josephson effect in the gap region significant radiation could be capacitively coupled from the oscillator junction to an adjacent junction, sufficient for SIS mixer experiments at Terahertz frequencies. Research efforts are now under way to further extend and ex-pand these studies. A high critical current density all NbN tunnel junction system is now under development for Terahertz applications and a new set of coupled Josephson oscillator - SIS detector experiments is being initiated using NbN tunnel junc-tions. In this paper we will review the original coupled junction high frequency experiments and report on the recent progress of the current NbN tunnel junction experiments.
Rugged, high current density NbN1−xCx/MgO/NḃN1−xCx tunnel junctions have been fabricated and tested as voltage tunable Josephson junction terahertz oscillators. The emitted radiation from these junctions is detected on chip by a second junction which is capacitively coupled to the first. For oscillator junctions with a critical current density of Jc∼3.5×104 A/cm2 we find that the junction oscillates with a voltage amplitude of ∼1.5 mV. The detected rf voltage level remains essentially constant from 300 GHz to above 1 THz. The oscillator junction produces 0.5 μW of terahertz radiation of which, due to impedance mismatch, 0.01 μW is coupled into the detector junction.
By using a capacitively coupled set of Josephson tunnel junctions we have performed experiments on the feasibility of using a Josephson junction as a local oscillator at frequencies up to and in excess of the gap sum of the junction. One junction was biased to serve as a local oscillator, whose AC power output could be monitored by observing the constant voltage Josephson steps on the current-voltage characteristic of the second junction. Using this coupling scheme we have coupled large oscillator signal levels (∼ 12.5nW) into the detector junction. For frequencies below the gap sum frequency our measurements are consistent with the Werthamer theory. For bias voltages above the gap sum we observe an anomalously fast roll off of the detected power from the oscillator junction.
ABSTRACT: Active superconducting circuits based on picoseconds switching, i.e. THz oscillating, Josephson tunnel junctions are expected to find a large domain of applications in spatial sub-millimeter wave and FIR detectors as well as in satellite based wideband signal and data processors. In the first case SIS (superconductor-insulator-superconductor) tunnel junctions are required, while in the second case SNS (superconductor-normal metal-superconductor) self-shunted junctions are preferred. We present the advantages of the nitride junction technology currently developed at CEA-Grenoble, based on high-performance MTS (medium temperature superconductor) NbN films in both SIS and SNS junctions. In the SIS case the device performances rely on a sputter deposited and post-annealed, only 0.5-0.7 nm thick, dielectric MgO barrier. This leads to junctions with a Josephson critical current in the range of 10-25 kA/cm, and a large superconducting energy gap (> 5 meV) associated with a low sub-gap quasi-particle leakage current. These parameters are suitable for low “noise temperature ” heterodyne mixers, local oscillators, and integrated receivers in the 0.8 to 1.4 THz frequency range. In the SNS case, a new
Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.
Superconducting tunnel junctions may be used in a number of high frequency devices. Two non-linear effects are employed: the sharp rise in the quasiparticle current at the gap voltage and the highly non-linear Josephson relations. A brief review of high frequency applications, mainly based on Josephson tunneling, is given. The successful SIS mixer is treated in detail and state-of-the-art results are quoted. The use of Nb-based tunnel junctions as SIS mixer elements is surveyed. High T c superconductors give possibilities of extending the operating frequency and temperature of high frequency detectors. However, stringent tunnel junction requirements have to be met. For example, the critical current density of the junction has to exceed 10 5 A/cm 2 for use in the THz regime. Present day junction technology employing high T c superconductors is shortly reviewed. Several methods give I c R N values larger than 1 mV for weak link junctions.
The terahertz region of the electromagnetic spectrum [0.3-10THz] has, so far, not been exploited fully due to the lack of suitable sources and detectors. Indeed, THz frequency lies between the frequency range of traditional electronics and photonics where the existing technology cannot be simply extended. SIS Niobium tunnel junctions that are currently used as mixing element in heterodyne receivers are intrinsically limited in frequency by the energy gap of Nb and operate only at low temperature (4.2K). An alternative to these devices consists of using High-Tc superconducting receivers. Over the past years, we have developed a new approach based on ion irradiation to make Josephson nano-junctions and SQUIDs with YBCO thin films [1,2]. In this talk, we will present a study of the high-frequency mixing properties of such junctions up to 400 GHz [3]. Conversion gain has been measured at frequencies spanning the range below and above the characteristic frequency fc = (2e/h)IcRn of the junctions. The transition between two distinct mixing regimes has been clearly evidenced, in good agreement with the prediction of the three ports model.[1] N. Bergeal et al., Appl. Phys. Lett. 87, 102502 (2005)[2] N. Bergeal et al., Appl. Phys. Lett. 89, 1112515 (2006)[3] Luo et al, arXiv:1203.1734 (2012)