Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Spectral hole-burning of Eu3+: Y2SiO5 crystal at 579.62 mm

Xue Sl, Chen Lb, Yy Zhao, Li Fm, Zhang Sd, HB Wang

Published Jan 1, 2005• 0 citations
OpenAlex

Abstract

By using an Ar+ ion laser, a tunable Rh 6G dye laser(Linewidth : 0.5 cm(-1)) and a Coherent 899-21 dye laser as light sources and using a monochromator and a phase-locking amplifier, the optical properties of Eu3+ : Y2SiO5 crystal were detected. Persistent spectral hole burning (PSHB) were also observed in (5)Do-(7)Fo transition in the crystal at the temperature of 16 K. For 15 mW dye laser (Wavelength : 579.62 nm) burning the crystal for 0.1 s a spectral hole with about 80 MHz hole width were detected and the hole can been keep for longer than 10 h.

Related papers

Spectral Hole-Burning of Eu 3+ :Y 2 SiO 5 Crystal at 16 K

Xue Shao-Lin, Muhuo Yu, Lingbing Chen +4 more

By using an Ar + ion laser, a tunable Rh 6 G dye laser (linewidth 0.5 cm −1 ) pumped by the second harmonic of a YAG:Nd laser and a Coherent 899-21 dye laser as light sources and using a monochromator, a phase-locking amplifier and a computer as the data detecting system, we detect the optical properties of Eu 3+ -doped Y 2 SiO 5 crystal. Persistent spectral hole burning (PSHB) are observed in the Eu 3+ ions spectral lines ( 5 D 0 − 7 F 0 transition) in the crystal at the temperature of 16 K. For 15 mW dye laser burning the crystal for 0.1 s spectral holes with hole width about 80 MHz both at 579.62 nm and at 579.82 nm are detected and the holes can remain for a long time, more than 10 h.

Chinese Physics Letters•Apr 1, 2007•0 citations

Spectrally Narrow, Long-Term Stable Optical Frequency Reference Based on a Eu3+∶Y2SiO5 Crystal at Cryogenic Temperature

Qunfeng Chen, Andrei Troshyn, Ingo Ernsting +4 more

Using an ultrastable continuous-wave laser at 580 nm we performed spectral hole burning of Eu(3+):Y(2)SiO(5) at a very high spectral resolution. The essential parameters determining the usefulness as a macroscopic frequency reference, linewidth, temperature sensitivity, and long-term stability, were characterized using a H-maser stabilized frequency comb. Spectral holes with a linewidth as low as 6 kHz were observed and the upper limit of the drift of the hole frequency was determined to be 5±3 mHz/s. We discuss the necessary requirements for achieving ultrahigh stability in laser frequency stabilization to these spectral holes.

arXiv:1107.3764•Physical Review Letters•Nov 21, 2011•34 citations

Converting Eu^3+ between defect sites in BaFCl for persistent spectral hole burning

Songfeng Li, G. K. Liu, Wei Zhao

Persistent spectral hole burning (PSHB) is demonstrated in the (7)F(0)-->(5)D(0) optical transition of Eu(3+) doped into crystals of BaFCl. For Eu(3+) ions at two different lattice sites, persistent holes can be burned at temperatures below 77 K. The characteristics of the hole-burning process suggest that the observed PSHB effect is due to laser-excitation-induced site-to-site conversion. One type of Eu(3+) site is converted into another type of defect site. This process is not optically reversible, and holes can be erased only when the temperature increases to 150 K.

Optics Letters•Jun 15, 1999•13 citations

Detection Techniques and Fundamental Limits in Frequency Stabilization via Spectral Hole Burning

Michael Hartman, Xiuji Lin, Benjamin Pointard +5 more

This poster presents the status of the development of an ultra-frequency stable laser via a spectroscopic technique known as Spectral Hole Burning (SHB). In short, we can use a pump laser to imprint, or ’burn’, transmissive spectral lines, or ’spectral holes’, in the otherwise inhomogeneously broadened absorptive spectral sites of a Eu3+ doped Y2SiO5 crystal. We can then lock a probe laser to these narrow spectral features achieving our frequency stabilized laser. Of great concern is the frequency stability of the spectral holes, such as their sensitivity to temperature changes which we characterize here. Additionally, a challenge this experiment faces is the restriction of probe laser power to avoid damaging the spectral features. This sets a relatively high level of shot noise, limiting the detection sensitivity. Here we present our solution to overcome this difficulty by using a multi-spectral- hole probing scheme to average the probing signals of several burned spectral holes.

•Nov 8, 2023•0 citations

Tunable laser for persistent spectral hole burning optical memories

R. L. Cone

Abstract : A tunable laser for infrared and visible operation was purchased to expand our work on optical memories based on persistent spectral hole burning. The Coherent 899-21 laser uses Ti:sapphire and dye media to cover the spectral regions required for semiconductor laser operation and for photon-gated memories. A large argon-ion pump laser for use with the tunable laser was purchased with local funds. Searching for new hole burning materials, evaluation of their properties, and studies of the limits on material performance were the goals of our research. Attention was focussed on rare earth or transition metal ion materials. (MM)

STIN•Dec 23, 1994•0 citations

Room-temperature persistent spectral hole burning of Sm/sup 2+/ in silicate-based fiber

Kentarou Nouchi, Tsuneo Mitsuyu, Kimihiko Hirao +2 more

Summary form only given. Persistent spectral hole burning (PSHB) of rare-earth-doped inorganic materials has attracted much attention in view of application to high-density optical memories. In particular, it seems that the glass materials are advantageous for application in wavelength-selective optical devices, as well as the memory devices, because of their large inhomogeneous linewidth. The wavelength-selective devices are key components in the wavelength-division multiplexing system, which is important for the next-generation optical communication technology. The problem for practical application lies in the fact that PSHB of rare-earth ions in glasses is usually observed only at temperature below 20 K. However, room-temperature PSHB has been observed recently for Sm/sup 2+/-doped crystals and glasses.

Conference on Lasers and Electro-Optics•Jan 20, 2003•0 citations
By using an Ar+ ion laser, a tunable Rh 6G dye laser(Linewidth : 0.5 cm(-1)) and a Coherent 899-21 dye laser as light sources and using a monochromator and a phase-locking amplifier, the optical properties of Eu3+ : Y2SiO5 crystal were detected. Persistent spectral hole burning (PSHB) were also observed in (5)Do-(7)Fo transition in the crystal at the temperature of 16 K. For 15 mW dye laser (Wavelength : 579.62 nm) burning the crystal for 0.1 s a spectral hole with about 80 MHz hole width were detected and the hole can been keep for longer than 10 h.
By using an Ar + ion laser, a tunable Rh 6 G dye laser (linewidth 0.5 cm −1 ) pumped by the second harmonic of a YAG:Nd laser and a Coherent 899-21 dye laser as light sources and using a monochromator, a phase-locking amplifier and a computer as the data detecting system, we detect the optical properties of Eu 3+ -doped Y 2 SiO 5 crystal. Persistent spectral hole burning (PSHB) are observed in the Eu 3+ ions spectral lines ( 5 D 0 − 7 F 0 transition) in the crystal at the temperature of 16 K. For 15 mW dye laser burning the crystal for 0.1 s spectral holes with hole width about 80 MHz both at 579.62 nm and at 579.82 nm are detected and the holes can remain for a long time, more than 10 h.
Using an ultrastable continuous-wave laser at 580 nm we performed spectral hole burning of Eu(3+):Y(2)SiO(5) at a very high spectral resolution. The essential parameters determining the usefulness as a macroscopic frequency reference, linewidth, temperature sensitivity, and long-term stability, were characterized using a H-maser stabilized frequency comb. Spectral holes with a linewidth as low as 6 kHz were observed and the upper limit of the drift of the hole frequency was determined to be 5±3 mHz/s. We discuss the necessary requirements for achieving ultrahigh stability in laser frequency stabilization to these spectral holes.
Persistent spectral hole burning (PSHB) is demonstrated in the (7)F(0)-->(5)D(0) optical transition of Eu(3+) doped into crystals of BaFCl. For Eu(3+) ions at two different lattice sites, persistent holes can be burned at temperatures below 77 K. The characteristics of the hole-burning process suggest that the observed PSHB effect is due to laser-excitation-induced site-to-site conversion. One type of Eu(3+) site is converted into another type of defect site. This process is not optically reversible, and holes can be erased only when the temperature increases to 150 K.
This poster presents the status of the development of an ultra-frequency stable laser via a spectroscopic technique known as Spectral Hole Burning (SHB). In short, we can use a pump laser to imprint, or ’burn’, transmissive spectral lines, or ’spectral holes’, in the otherwise inhomogeneously broadened absorptive spectral sites of a Eu3+ doped Y2SiO5 crystal. We can then lock a probe laser to these narrow spectral features achieving our frequency stabilized laser. Of great concern is the frequency stability of the spectral holes, such as their sensitivity to temperature changes which we characterize here. Additionally, a challenge this experiment faces is the restriction of probe laser power to avoid damaging the spectral features. This sets a relatively high level of shot noise, limiting the detection sensitivity. Here we present our solution to overcome this difficulty by using a multi-spectral- hole probing scheme to average the probing signals of several burned spectral holes.
Abstract : A tunable laser for infrared and visible operation was purchased to expand our work on optical memories based on persistent spectral hole burning. The Coherent 899-21 laser uses Ti:sapphire and dye media to cover the spectral regions required for semiconductor laser operation and for photon-gated memories. A large argon-ion pump laser for use with the tunable laser was purchased with local funds. Searching for new hole burning materials, evaluation of their properties, and studies of the limits on material performance were the goals of our research. Attention was focussed on rare earth or transition metal ion materials. (MM)
Summary form only given. Persistent spectral hole burning (PSHB) of rare-earth-doped inorganic materials has attracted much attention in view of application to high-density optical memories. In particular, it seems that the glass materials are advantageous for application in wavelength-selective optical devices, as well as the memory devices, because of their large inhomogeneous linewidth. The wavelength-selective devices are key components in the wavelength-division multiplexing system, which is important for the next-generation optical communication technology. The problem for practical application lies in the fact that PSHB of rare-earth ions in glasses is usually observed only at temperature below 20 K. However, room-temperature PSHB has been observed recently for Sm/sup 2+/-doped crystals and glasses.