Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Frontiers in Optics

Heterodyne Interferometric Control of Vacuum-Trapped Nano-Particles

Vijay Jain, Bradley Deutsch, J. Gieseler, Romain Quidant, Lukáš Novotný

Published Jan 1, 2012• 0 citations
Publisher

Abstract

To optimize the signal-to-noise ratio of optically trapped nano-particles in high vacuum, we implemented a heterodyne interferometer to monitor particle motion in a backscattering configuration. The signal relays to a feedback loop that cools the nano-particle to sub-Kelvin temperatures.
DOI
10.1364/ls.2012.ltu5i.4

Related papers

Controlling the Motion of a Nanoparticle Trapped in Vacuum

Jamie Vovrosh, Muddassar Rashid, David Hempston +2 more

We demonstrate a simple and robust geometry for optical trapping in vacuum of a single nanoparticle based on a parabolic mirror and the optical gradient force, and we demonstrate rapid parametric feedback cooling of all three motional degrees of freedom from room temperature to a few mK. A single laser at 1550nm, and a single photodiode, are used for trapping, position detection, and cooling for all three dimensions. Particles with diameters from 26nm to 160nm are trapped without feedback to 10$^{-5}$mbar and with feedback engaged the pressure is reduced to 10$^{-6}$mbar. Modifications to the harmonic motion in the presence of noise and feedback are studied, and an experimental mechanical quality factor $>4\times 10^7$ is estimated.

•Mar 9, 2016•4 citations

Optical trap of a nanoparticle in ultra-high vacuum towards a mixture of a nanoparticle and a laser-cooled gas

Daisuke Akamatsu

A single nanoparticle of SiO2is optically trapped inside an ultrahigh-vacuum compatible chamber system. The motion of the particle inside the trap is observed with the Michelson-type interferometer. The system presented in this paper will enable us to realize a mixture of a single nanoparticle and a laser-cooled gas for investigating interaction between a mesoscopic particle and laser-cooled atoms.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jul 1, 2017•0 citations

Cooling and manipulation of a levitated nanoparticle with an optical fiber trap

Pau Mestres, Johann Berthelot, Marko Spasenović +3 more

Accurate delivery of small targets in high vacuum is a pivotal task in many branches of science and technology. Beyond the different strategies developed for atoms, proteins, macroscopic clusters, and pellets, the manipulation of neutral particles over macroscopic distances still poses a formidable challenge. Here, we report an approach based on a mobile optical trap operated under feedback control that enables cooling and long range 3D manipulation of a silica nanoparticle in high vacuum. We apply this technique to load a single nanoparticle into a high-finesse optical cavity through a load-lock vacuum system. We foresee our scheme to benefit the field of optomechanics with levitating nano-objects as well as ultrasensitive detection and monitoring.

arXiv:1505.02012•Applied Physics Letters•Oct 12, 2015•65 citations

Subkelvin Parametric Feedback Cooling of a Laser-Trapped Nanoparticle

Jan Gieseler, Bradley Deutsch, Romain Quidant +1 more

We optically trap a single nanoparticle in high vacuum and cool its three spatial degrees of freedom by means of active parametric feedback. Using a single laser beam for both trapping and cooling we demonstrate a temperature compression ratio of four orders of magnitude. The absence of a clamping mechanism provides robust decoupling from the heat bath and eliminates the requirement of cryogenic precooling. The small size and mass of the nanoparticle yield high resonance frequencies and high quality factors along with low recoil heating, which are essential conditions for ground state cooling and for low decoherence. The trapping and cooling scheme presented here opens new routes for testing quantum mechanics with mesoscopic objects and for ultrasensitive metrology and sensing.

arXiv:1202.6435•Physical Review Letters•Sep 7, 2012•608 citations

Detection Optimization of an Optically Trapped Microparticle in Vacuum with Kalman Filter

Shidong Xu, Ming Chen, Jianyu Yang +3 more

The optical trapping of micro-nano particles in a high vacuum has become a popular research platform in various frontier fields of physics because of its excellent isolation from the environment. The precise measurement of particle motion information is required to analyze and control particle motion modes in traps. However, the detection accuracy is limited by measurement noise and coupling signals from other axes in microparticle optical traps. In this study, we use the Kalman filter to extract the real motion information of each axis under simulation conditions, and the results show that the Kalman filter performs well in noise suppression, improving the RMSE from 12.64 to 5.18 nm and enhancing the feedback cooling performance by approximately 27% through reducing the axes’ signal coupling ratio. We believe that as a solution to these challenges, the Kalman filter will bring a significant achievement to micrometer particle optical traps in vacuums.

Photonics•Sep 27, 2022•3 citations

Hardware-in-the-loop simulation research on cooling effect of different modulated waveform signals with vacuum optical trap parameter feedback

Zhanming Hu, Huibing Han, Haonan Liu +4 more

Vacuum optical trap is a technology that captures and manipulates particles in a near-vacuum environment by means of laser mechanical effects. It is an ideal platform for precision measurement with high quality factor. Due to its low environmental damping, vacuum optical traps require feedback cooling to reduce the equivalent temperature of particle centroid motion to prevent particle escape. Parametric feedback cooling is a mainstream solution to achieve stable trapping of particles in optical traps. Monte Carlo method and finite difference method were used to simulate the displacement fluctuation of the microsphere without feedback, and the FPGA circuit was used to output control signals with different waveforms to test the feedback cooling effect. Under the premise of reaching mK cooling level, square wave control signals have advantages in fast feedback cooling, and sine wave control signals have advantages in maintaining phase matching.

International Conference on Signal Processing and Communication Technology (SPCT)•Apr 6, 2023•0 citations
We demonstrate a simple and robust geometry for optical trapping in vacuum of a single nanoparticle based on a parabolic mirror and the optical gradient force, and we demonstrate rapid parametric feedback cooling of all three motional degrees of freedom from room temperature to a few mK. A single laser at 1550nm, and a single photodiode, are used for trapping, position detection, and cooling for all three dimensions. Particles with diameters from 26nm to 160nm are trapped without feedback to 10−5^{-5}−5mbar and with feedback engaged the pressure is reduced to 10−6^{-6}−6mbar. Modifications to the harmonic motion in the presence of noise and feedback are studied, and an experimental mechanical quality factor >4×107>4\times 10^7>4×107 is estimated.
Accurate delivery of small targets in high vacuum is a pivotal task in many branches of science and technology. Beyond the different strategies developed for atoms, proteins, macroscopic clusters, and pellets, the manipulation of neutral particles over macroscopic distances still poses a formidable challenge. Here, we report an approach based on a mobile optical trap operated under feedback control that enables cooling and long range 3D manipulation of a silica nanoparticle in high vacuum. We apply this technique to load a single nanoparticle into a high-finesse optical cavity through a load-lock vacuum system. We foresee our scheme to benefit the field of optomechanics with levitating nano-objects as well as ultrasensitive detection and monitoring.
We optically trap a single nanoparticle in high vacuum and cool its three spatial degrees of freedom by means of active parametric feedback. Using a single laser beam for both trapping and cooling we demonstrate a temperature compression ratio of four orders of magnitude. The absence of a clamping mechanism provides robust decoupling from the heat bath and eliminates the requirement of cryogenic precooling. The small size and mass of the nanoparticle yield high resonance frequencies and high quality factors along with low recoil heating, which are essential conditions for ground state cooling and for low decoherence. The trapping and cooling scheme presented here opens new routes for testing quantum mechanics with mesoscopic objects and for ultrasensitive metrology and sensing.
The optical trapping of micro-nano particles in a high vacuum has become a popular research platform in various frontier fields of physics because of its excellent isolation from the environment. The precise measurement of particle motion information is required to analyze and control particle motion modes in traps. However, the detection accuracy is limited by measurement noise and coupling signals from other axes in microparticle optical traps. In this study, we use the Kalman filter to extract the real motion information of each axis under simulation conditions, and the results show that the Kalman filter performs well in noise suppression, improving the RMSE from 12.64 to 5.18 nm and enhancing the feedback cooling performance by approximately 27% through reducing the axes’ signal coupling ratio. We believe that as a solution to these challenges, the Kalman filter will bring a significant achievement to micrometer particle optical traps in vacuums.
Vacuum optical trap is a technology that captures and manipulates particles in a near-vacuum environment by means of laser mechanical effects. It is an ideal platform for precision measurement with high quality factor. Due to its low environmental damping, vacuum optical traps require feedback cooling to reduce the equivalent temperature of particle centroid motion to prevent particle escape. Parametric feedback cooling is a mainstream solution to achieve stable trapping of particles in optical traps. Monte Carlo method and finite difference method were used to simulate the displacement fluctuation of the microsphere without feedback, and the FPGA circuit was used to output control signals with different waveforms to test the feedback cooling effect. Under the premise of reaching mK cooling level, square wave control signals have advantages in fast feedback cooling, and sine wave control signals have advantages in maintaining phase matching.