Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Signal Processing and Communication Technology (SPCT)

Hardware-in-the-loop simulation research on cooling effect of different modulated waveform signals with vacuum optical trap parameter feedback

Zhanming Hu, Huibing Han, Haonan Liu, Gongchang Wang, Huiying Fan, Qiongnan Huang, Fang Lin

Published Apr 6, 2023• 0 citations
Publisher

Abstract

Vacuum optical trap is a technology that captures and manipulates particles in a near-vacuum environment by means of laser mechanical effects. It is an ideal platform for precision measurement with high quality factor. Due to its low environmental damping, vacuum optical traps require feedback cooling to reduce the equivalent temperature of particle centroid motion to prevent particle escape. Parametric feedback cooling is a mainstream solution to achieve stable trapping of particles in optical traps. Monte Carlo method and finite difference method were used to simulate the displacement fluctuation of the microsphere without feedback, and the FPGA circuit was used to output control signals with different waveforms to test the feedback cooling effect. Under the premise of reaching mK cooling level, square wave control signals have advantages in fast feedback cooling, and sine wave control signals have advantages in maintaining phase matching.

DOI
10.1117/12.2673781

Related papers

Cooling of a mesoscopic single-particle harmonic oscillator using real-time digital control systems

Ashley Setter

Optically levitated systems provide an ideal environment for isolating objects extremely well from the environment such that their behaviour can be more easily studied without external influences. Moreover, using optical detection, very high levels of sensitivity to that behaviour can be achieved, allowing precise detection of their motion and measurement of forces upon such a system. In the experiment we describe in this thesis, one can construct an optical gradient force trap by simply directing a collimated light beam onto a parabolic mirror with a sufficiently high numerical aperture. The resulting focusing not only generates the optical trapping potential but also allows detection as a particle trapped at the focal spot of the mirror has the light it scatters onto the mirror collimated and sent back in the direction of the incident trapping light beam. The trap described here allows levitation of dielectric nanoparticles with radii from 10nm to 300nm at pressures from 103 —10-8 mbar. In this thesis I describe the experimental setup and the theory describing a particle levitated in this setup, detailing how, from the detected light intensity on a photodetector, we can extract the properties describing the physical system, including the frequency of motion, the damping upon the motion, the temperature associated with the motion, the radius of the trapped nanoparticle and the conversion factor which allows us to convert from the photo-current measured by the detector to the physical displacement of the particle. Cooling of the translational motion to the ground state is a much targeted goal in the field of levitated optomechanics as it has applications in producing quantum states, performing matter-wave interferometry, testing collapse models and as a very precise force sensor. In this thesis I demonstrate and investigate a number of different cooling methods applied to the translational motion. First, I describe how one can utilise an FIR (Finite Impulse Response) band-pass filter to isolate the signal due to the motion of a single translational degree of freedom and utilise this to perform active feedback cooling upon this degree of freedom. I demonstrate this by implementing an FIR filter on a FPGA (Field Programmable Gate Array) and utilising it in real-time to cool the motion to 2.5K ± 0.4 K. Secondly I utilise a tracking algorithm called a Kalman Filter, I describe how this algorithm functions to track the state of objects from noisy partial measurements of the state and how this can be applied to track levitated nanoparticles. I then detail how this was implemented in an FPGA so that the Kalman Filter could be used in real-time to estimate the position of a levitated nanoparticle. We demonstrate cooling of the translation centre-of-mass motion along the optical axis by 3 orders of magnitude to a temperature of 162mK ± 15 mK. Next I describe a classical model of the motion of a levitated nanoparticle and describe how this model can be simulated numerically to produce simulated time traces of the motion. I then demonstrate how this simulation can be used to reproduce several theoretical relations as well as reproduce experimental results and be utilised to simulate and test the performance of cooling algorithms without requiring experimental implementation. Next I use this simulation to model the effect of a Dung non-linearity in the trapping potential. I match the behaviour of the simulation when exposed to as a pulsed reduction of the laser power with the behaviour of the experimental system when exposed to the same stimulus and in doing so extract the Dung non-linearity in the optical trapping potential generated by the parabolic mirror, which takes a value of ξ = -0.100 m-2. Finally I describe a quantum model of the motion of a levitated nanosphere, which takes into account the various decoherence sources in the experimental system, namely the interaction with the background gas, the laser photons and decoherence due to the measurement. Using this I investigate several different forms of active feedback cooling, including the "optimal" cooling as determined from the tools of control theory, which takes the form of a square wave, and the more traditional sinusoidal feedback signal. In addition I compare both linear cooling by applying a force directly to the nanoparticle and quadratic cooling by modulating the power of the trapping laser. I determine that cooling to mean phonon numbers of less than 10 with the current experimental setup is achievable utilising any of the feedback schemes described here when they are tuned appropriately.

•Jan 1, 2020•0 citations

Cooling of a levitated nanoparticle with digital parametric feedback

Yu Zheng, Guang-Can Guo, Fang-Wen Sun

The motion control of a levitated nanoparticle plays a central role in optical levitation for fundamental studies and practical applications. Here, we presented digital parametric feedback cooling based on square wave modulation by switching trapping laser intensity between two levels. The effects of the modulation depth and modulation signal phase on the cooling result were investigated in detail. Using such a digital parametric feedback method, the center-of-mass temperature of all three motional degrees of freedom can be cooled to dozens of millikelvin. The flexibility and agility of the digital feedback control pave the way for a variety of motion control modes.

arXiv:1904.06410•Applied Physics Letters•Sep 2, 2019•19 citations

Detection Optimization of an Optically Trapped Microparticle in Vacuum with Kalman Filter

Shidong Xu, Ming Chen, Jianyu Yang +3 more

The optical trapping of micro-nano particles in a high vacuum has become a popular research platform in various frontier fields of physics because of its excellent isolation from the environment. The precise measurement of particle motion information is required to analyze and control particle motion modes in traps. However, the detection accuracy is limited by measurement noise and coupling signals from other axes in microparticle optical traps. In this study, we use the Kalman filter to extract the real motion information of each axis under simulation conditions, and the results show that the Kalman filter performs well in noise suppression, improving the RMSE from 12.64 to 5.18 nm and enhancing the feedback cooling performance by approximately 27% through reducing the axes’ signal coupling ratio. We believe that as a solution to these challenges, the Kalman filter will bring a significant achievement to micrometer particle optical traps in vacuums.

Photonics•Sep 27, 2022•3 citations

Numerical investigation of the waveform dependence in sympathetic cooling of trapped particles

Andreas Wolfgang Schell, Oskar Sund

To control the motion of a trapped particle and prevent quantum state decoherence, cooling is required. In order to trap particles that do not offer cooling transitions, sympathetic cooling can be used. We are going to investigate the effects that arise from changing the trapping waveform applied to a Paul trap. We are especially interested in the comparison of the sympathetic cooling performance of the sinusoidal wave with its alternatives. We investigate different waveforms such as normal sine driven traps, but also traps driven with a saw-tooth, triangle, or square waveforms. From the simulation results, cooling rates as well as stability parameters are extracted. Ours findings indicate potential benefits of further in-depth studies on the key properties that trap driving waveforms should possess to enhance the sympathetic cooling efficiency in Paul traps.

Optical and Quantum Sensing and Precision Metrology II•Mar 19, 2025•0 citations

Controlling the Motion of a Nanoparticle Trapped in Vacuum

Jamie Vovrosh, Muddassar Rashid, David Hempston +2 more

We demonstrate a simple and robust geometry for optical trapping in vacuum of a single nanoparticle based on a parabolic mirror and the optical gradient force, and we demonstrate rapid parametric feedback cooling of all three motional degrees of freedom from room temperature to a few mK. A single laser at 1550nm, and a single photodiode, are used for trapping, position detection, and cooling for all three dimensions. Particles with diameters from 26nm to 160nm are trapped without feedback to 10$^{-5}$mbar and with feedback engaged the pressure is reduced to 10$^{-6}$mbar. Modifications to the harmonic motion in the presence of noise and feedback are studied, and an experimental mechanical quality factor $>4\times 10^7$ is estimated.

•Mar 9, 2016•4 citations

Subkelvin Parametric Feedback Cooling of a Laser-Trapped Nanoparticle

Jan Gieseler, Bradley Deutsch, Romain Quidant +1 more

We optically trap a single nanoparticle in high vacuum and cool its three spatial degrees of freedom by means of active parametric feedback. Using a single laser beam for both trapping and cooling we demonstrate a temperature compression ratio of four orders of magnitude. The absence of a clamping mechanism provides robust decoupling from the heat bath and eliminates the requirement of cryogenic precooling. The small size and mass of the nanoparticle yield high resonance frequencies and high quality factors along with low recoil heating, which are essential conditions for ground state cooling and for low decoherence. The trapping and cooling scheme presented here opens new routes for testing quantum mechanics with mesoscopic objects and for ultrasensitive metrology and sensing.

arXiv:1202.6435•Physical Review Letters•Sep 7, 2012•608 citations
Vacuum optical trap is a technology that captures and manipulates particles in a near-vacuum environment by means of laser mechanical effects. It is an ideal platform for precision measurement with high quality factor. Due to its low environmental damping, vacuum optical traps require feedback cooling to reduce the equivalent temperature of particle centroid motion to prevent particle escape. Parametric feedback cooling is a mainstream solution to achieve stable trapping of particles in optical traps. Monte Carlo method and finite difference method were used to simulate the displacement fluctuation of the microsphere without feedback, and the FPGA circuit was used to output control signals with different waveforms to test the feedback cooling effect. Under the premise of reaching mK cooling level, square wave control signals have advantages in fast feedback cooling, and sine wave control signals have advantages in maintaining phase matching.
Optically levitated systems provide an ideal environment for isolating objects extremely well from the environment such that their behaviour can be more easily studied without external influences. Moreover, using optical detection, very high levels of sensitivity to that behaviour can be achieved, allowing precise detection of their motion and measurement of forces upon such a system. In the experiment we describe in this thesis, one can construct an optical gradient force trap by simply directing a collimated light beam onto a parabolic mirror with a sufficiently high numerical aperture. The resulting focusing not only generates the optical trapping potential but also allows detection as a particle trapped at the focal spot of the mirror has the light it scatters onto the mirror collimated and sent back in the direction of the incident trapping light beam. The trap described here allows levitation of dielectric nanoparticles with radii from 10nm to 300nm at pressures from 103 —10-8 mbar. In this thesis I describe the experimental setup and the theory describing a particle levitated in this setup, detailing how, from the detected light intensity on a photodetector, we can extract the properties describing the physical system, including the frequency of motion, the damping upon the motion, the temperature associated with the motion, the radius of the trapped nanoparticle and the conversion factor which allows us to convert from the photo-current measured by the detector to the physical displacement of the particle. Cooling of the translational motion to the ground state is a much targeted goal in the field of levitated optomechanics as it has applications in producing quantum states, performing matter-wave interferometry, testing collapse models and as a very precise force sensor. In this thesis I demonstrate and investigate a number of different cooling methods applied to the translational motion. First, I describe how one can utilise an FIR (Finite Impulse Response) band-pass filter to isolate the signal due to the motion of a single translational degree of freedom and utilise this to perform active feedback cooling upon this degree of freedom. I demonstrate this by implementing an FIR filter on a FPGA (Field Programmable Gate Array) and utilising it in real-time to cool the motion to 2.5K ± 0.4 K. Secondly I utilise a tracking algorithm called a Kalman Filter, I describe how this algorithm functions to track the state of objects from noisy partial measurements of the state and how this can be applied to track levitated nanoparticles. I then detail how this was implemented in an FPGA so that the Kalman Filter could be used in real-time to estimate the position of a levitated nanoparticle. We demonstrate cooling of the translation centre-of-mass motion along the optical axis by 3 orders of magnitude to a temperature of 162mK ± 15 mK. Next I describe a classical model of the motion of a levitated nanoparticle and describe how this model can be simulated numerically to produce simulated time traces of the motion. I then demonstrate how this simulation can be used to reproduce several theoretical relations as well as reproduce experimental results and be utilised to simulate and test the performance of cooling algorithms without requiring experimental implementation. Next I use this simulation to model the effect of a Dung non-linearity in the trapping potential. I match the behaviour of the simulation when exposed to as a pulsed reduction of the laser power with the behaviour of the experimental system when exposed to the same stimulus and in doing so extract the Dung non-linearity in the optical trapping potential generated by the parabolic mirror, which takes a value of ξ = -0.100 m-2. Finally I describe a quantum model of the motion of a levitated nanosphere, which takes into account the various decoherence sources in the experimental system, namely the interaction with the background gas, the laser photons and decoherence due to the measurement. Using this I investigate several different forms of active feedback cooling, including the "optimal" cooling as determined from the tools of control theory, which takes the form of a square wave, and the more traditional sinusoidal feedback signal. In addition I compare both linear cooling by applying a force directly to the nanoparticle and quadratic cooling by modulating the power of the trapping laser. I determine that cooling to mean phonon numbers of less than 10 with the current experimental setup is achievable utilising any of the feedback schemes described here when they are tuned appropriately.
The motion control of a levitated nanoparticle plays a central role in optical levitation for fundamental studies and practical applications. Here, we presented digital parametric feedback cooling based on square wave modulation by switching trapping laser intensity between two levels. The effects of the modulation depth and modulation signal phase on the cooling result were investigated in detail. Using such a digital parametric feedback method, the center-of-mass temperature of all three motional degrees of freedom can be cooled to dozens of millikelvin. The flexibility and agility of the digital feedback control pave the way for a variety of motion control modes.
The optical trapping of micro-nano particles in a high vacuum has become a popular research platform in various frontier fields of physics because of its excellent isolation from the environment. The precise measurement of particle motion information is required to analyze and control particle motion modes in traps. However, the detection accuracy is limited by measurement noise and coupling signals from other axes in microparticle optical traps. In this study, we use the Kalman filter to extract the real motion information of each axis under simulation conditions, and the results show that the Kalman filter performs well in noise suppression, improving the RMSE from 12.64 to 5.18 nm and enhancing the feedback cooling performance by approximately 27% through reducing the axes’ signal coupling ratio. We believe that as a solution to these challenges, the Kalman filter will bring a significant achievement to micrometer particle optical traps in vacuums.
To control the motion of a trapped particle and prevent quantum state decoherence, cooling is required. In order to trap particles that do not offer cooling transitions, sympathetic cooling can be used. We are going to investigate the effects that arise from changing the trapping waveform applied to a Paul trap. We are especially interested in the comparison of the sympathetic cooling performance of the sinusoidal wave with its alternatives. We investigate different waveforms such as normal sine driven traps, but also traps driven with a saw-tooth, triangle, or square waveforms. From the simulation results, cooling rates as well as stability parameters are extracted. Ours findings indicate potential benefits of further in-depth studies on the key properties that trap driving waveforms should possess to enhance the sympathetic cooling efficiency in Paul traps.
We demonstrate a simple and robust geometry for optical trapping in vacuum of a single nanoparticle based on a parabolic mirror and the optical gradient force, and we demonstrate rapid parametric feedback cooling of all three motional degrees of freedom from room temperature to a few mK. A single laser at 1550nm, and a single photodiode, are used for trapping, position detection, and cooling for all three dimensions. Particles with diameters from 26nm to 160nm are trapped without feedback to 10−5^{-5}−5mbar and with feedback engaged the pressure is reduced to 10−6^{-6}−6mbar. Modifications to the harmonic motion in the presence of noise and feedback are studied, and an experimental mechanical quality factor >4×107>4\times 10^7>4×107 is estimated.
We optically trap a single nanoparticle in high vacuum and cool its three spatial degrees of freedom by means of active parametric feedback. Using a single laser beam for both trapping and cooling we demonstrate a temperature compression ratio of four orders of magnitude. The absence of a clamping mechanism provides robust decoupling from the heat bath and eliminates the requirement of cryogenic precooling. The small size and mass of the nanoparticle yield high resonance frequencies and high quality factors along with low recoil heating, which are essential conditions for ground state cooling and for low decoherence. The trapping and cooling scheme presented here opens new routes for testing quantum mechanics with mesoscopic objects and for ultrasensitive metrology and sensing.