Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Controlling the Motion of a Nanoparticle Trapped in Vacuum

Jamie Vovrosh, Muddassar Rashid, David Hempston, James Bateman, Hendrik Ulbricht

Published Mar 9, 2016• 4 citations
OpenAlex

Abstract

We demonstrate a simple and robust geometry for optical trapping in vacuum of a single nanoparticle based on a parabolic mirror and the optical gradient force, and we demonstrate rapid parametric feedback cooling of all three motional degrees of freedom from room temperature to a few mK. A single laser at 1550nm, and a single photodiode, are used for trapping, position detection, and cooling for all three dimensions. Particles with diameters from 26nm to 160nm are trapped without feedback to 10$^{-5}$mbar and with feedback engaged the pressure is reduced to 10$^{-6}$mbar. Modifications to the harmonic motion in the presence of noise and feedback are studied, and an experimental mechanical quality factor $>4\times 10^7$ is estimated.

Related papers

Subkelvin Parametric Feedback Cooling of a Laser-Trapped Nanoparticle

Jan Gieseler, Bradley Deutsch, Romain Quidant +1 more

We optically trap a single nanoparticle in high vacuum and cool its three spatial degrees of freedom by means of active parametric feedback. Using a single laser beam for both trapping and cooling we demonstrate a temperature compression ratio of four orders of magnitude. The absence of a clamping mechanism provides robust decoupling from the heat bath and eliminates the requirement of cryogenic precooling. The small size and mass of the nanoparticle yield high resonance frequencies and high quality factors along with low recoil heating, which are essential conditions for ground state cooling and for low decoherence. The trapping and cooling scheme presented here opens new routes for testing quantum mechanics with mesoscopic objects and for ultrasensitive metrology and sensing.

arXiv:1202.6435•Physical Review Letters•Sep 7, 2012•608 citations

Electric feedback cooling of single charged nanoparticles in an optical trap

M. Iwasaki, T. Yotsuya, Naruki Tsubasa +3 more

We demonstrate feedback cooling of the center-of-mass motion of single charged nanoparticles to millikelvin temperatures in three dimensions via applying oscillating electric fields synchronized to their optically observed motion. The observed motional temperatures at weak feedback agree with a simple model and allow us to estimate the charge number of trapped nanoparticles. The agreement between our model and experiments is confirmed by independent measurements of the charge numbers based on a shift in the oscillation frequency induced by a constant electric field. The demonstrated temperature of less than $10\phantom{\rule{0.16em}{0ex}}\mathrm{mK}$ at $4\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}3}\phantom{\rule{0.16em}{0ex}}\mathrm{Pa}$ is lower than that with the conventional optical cooling approach at this pressure by one to two orders of magnitude. Our results form the basis of manipulating cold charged nanoparticles and pave the way to quantum mechanical studies with trapped nanoparticles near their ground state.

arXiv:1812.01230•Physical Review A•May 16, 2019•31 citations

Optical and electrical feedback cooling of a silica nanoparticle in a Paul trap

Lorenzo Dania, Dmitry S. Bykov, Matthias Samuel Günter Knoll +2 more

All three motional modes of a charged dielectric nanoparticle in a Paul trap are cooled by direct feedback to temperatures of a few mK. We test two methods, one based on electrical forces and the other on optical forces; for both methods, we find similar cooling efficiencies. Cooling is characterized for both feedback forces as a function of feedback parameters, background pressure, and the particle’s position.

arXiv:2007.04434•Jul 5, 2020•2 citations

Optical trap and control of a nanoparticle in vacuum towards a mixture with ultracold atoms

Daisuke Akamatsu

We design and build a new experimental setup to demonstrate a mixture of a single nanoparticle and laser-cooled atoms. This system aims for investigating the low-energy scattering of ultracold atoms by a dielectric nanoparticle. The wave nature of the cold atoms manifests itself in both elastic and inelastic cross sections. In the new experimental system at Yokohama National University, we demonstrated optical trapping and cooling of a glass nanoparticle in vacuum. The ballistic Brownian motion of the nanoparticle in the harmonic potential was observed. We also demonstrated parametric cooling of the center of mass motion of the nanoparticle. We discuss the prospects for realization of a mixture of a single nanoparticle and laser-cooled atoms.

Optical Technology and Measurement for Industrial Applications Conference (OPTM)•Dec 8, 2022•0 citations

Cooling of a mesoscopic single-particle harmonic oscillator using real-time digital control systems

Ashley Setter

Optically levitated systems provide an ideal environment for isolating objects extremely well from the environment such that their behaviour can be more easily studied without external influences. Moreover, using optical detection, very high levels of sensitivity to that behaviour can be achieved, allowing precise detection of their motion and measurement of forces upon such a system. In the experiment we describe in this thesis, one can construct an optical gradient force trap by simply directing a collimated light beam onto a parabolic mirror with a sufficiently high numerical aperture. The resulting focusing not only generates the optical trapping potential but also allows detection as a particle trapped at the focal spot of the mirror has the light it scatters onto the mirror collimated and sent back in the direction of the incident trapping light beam. The trap described here allows levitation of dielectric nanoparticles with radii from 10nm to 300nm at pressures from 103 —10-8 mbar. In this thesis I describe the experimental setup and the theory describing a particle levitated in this setup, detailing how, from the detected light intensity on a photodetector, we can extract the properties describing the physical system, including the frequency of motion, the damping upon the motion, the temperature associated with the motion, the radius of the trapped nanoparticle and the conversion factor which allows us to convert from the photo-current measured by the detector to the physical displacement of the particle. Cooling of the translational motion to the ground state is a much targeted goal in the field of levitated optomechanics as it has applications in producing quantum states, performing matter-wave interferometry, testing collapse models and as a very precise force sensor. In this thesis I demonstrate and investigate a number of different cooling methods applied to the translational motion. First, I describe how one can utilise an FIR (Finite Impulse Response) band-pass filter to isolate the signal due to the motion of a single translational degree of freedom and utilise this to perform active feedback cooling upon this degree of freedom. I demonstrate this by implementing an FIR filter on a FPGA (Field Programmable Gate Array) and utilising it in real-time to cool the motion to 2.5K ± 0.4 K. Secondly I utilise a tracking algorithm called a Kalman Filter, I describe how this algorithm functions to track the state of objects from noisy partial measurements of the state and how this can be applied to track levitated nanoparticles. I then detail how this was implemented in an FPGA so that the Kalman Filter could be used in real-time to estimate the position of a levitated nanoparticle. We demonstrate cooling of the translation centre-of-mass motion along the optical axis by 3 orders of magnitude to a temperature of 162mK ± 15 mK. Next I describe a classical model of the motion of a levitated nanoparticle and describe how this model can be simulated numerically to produce simulated time traces of the motion. I then demonstrate how this simulation can be used to reproduce several theoretical relations as well as reproduce experimental results and be utilised to simulate and test the performance of cooling algorithms without requiring experimental implementation. Next I use this simulation to model the effect of a Dung non-linearity in the trapping potential. I match the behaviour of the simulation when exposed to as a pulsed reduction of the laser power with the behaviour of the experimental system when exposed to the same stimulus and in doing so extract the Dung non-linearity in the optical trapping potential generated by the parabolic mirror, which takes a value of ξ = -0.100 m-2. Finally I describe a quantum model of the motion of a levitated nanosphere, which takes into account the various decoherence sources in the experimental system, namely the interaction with the background gas, the laser photons and decoherence due to the measurement. Using this I investigate several different forms of active feedback cooling, including the "optimal" cooling as determined from the tools of control theory, which takes the form of a square wave, and the more traditional sinusoidal feedback signal. In addition I compare both linear cooling by applying a force directly to the nanoparticle and quadratic cooling by modulating the power of the trapping laser. I determine that cooling to mean phonon numbers of less than 10 with the current experimental setup is achievable utilising any of the feedback schemes described here when they are tuned appropriately.

•Jan 1, 2020•0 citations

Cooling of a levitated nanoparticle with digital parametric feedback

Yu Zheng, Guang-Can Guo, Fang-Wen Sun

The motion control of a levitated nanoparticle plays a central role in optical levitation for fundamental studies and practical applications. Here, we presented digital parametric feedback cooling based on square wave modulation by switching trapping laser intensity between two levels. The effects of the modulation depth and modulation signal phase on the cooling result were investigated in detail. Using such a digital parametric feedback method, the center-of-mass temperature of all three motional degrees of freedom can be cooled to dozens of millikelvin. The flexibility and agility of the digital feedback control pave the way for a variety of motion control modes.

arXiv:1904.06410•Applied Physics Letters•Sep 2, 2019•19 citations
We demonstrate a simple and robust geometry for optical trapping in vacuum of a single nanoparticle based on a parabolic mirror and the optical gradient force, and we demonstrate rapid parametric feedback cooling of all three motional degrees of freedom from room temperature to a few mK. A single laser at 1550nm, and a single photodiode, are used for trapping, position detection, and cooling for all three dimensions. Particles with diameters from 26nm to 160nm are trapped without feedback to 10−5^{-5}−5mbar and with feedback engaged the pressure is reduced to 10−6^{-6}−6mbar. Modifications to the harmonic motion in the presence of noise and feedback are studied, and an experimental mechanical quality factor >4×107>4\times 10^7>4×107 is estimated.
We optically trap a single nanoparticle in high vacuum and cool its three spatial degrees of freedom by means of active parametric feedback. Using a single laser beam for both trapping and cooling we demonstrate a temperature compression ratio of four orders of magnitude. The absence of a clamping mechanism provides robust decoupling from the heat bath and eliminates the requirement of cryogenic precooling. The small size and mass of the nanoparticle yield high resonance frequencies and high quality factors along with low recoil heating, which are essential conditions for ground state cooling and for low decoherence. The trapping and cooling scheme presented here opens new routes for testing quantum mechanics with mesoscopic objects and for ultrasensitive metrology and sensing.
We demonstrate feedback cooling of the center-of-mass motion of single charged nanoparticles to millikelvin temperatures in three dimensions via applying oscillating electric fields synchronized to their optically observed motion. The observed motional temperatures at weak feedback agree with a simple model and allow us to estimate the charge number of trapped nanoparticles. The agreement between our model and experiments is confirmed by independent measurements of the charge numbers based on a shift in the oscillation frequency induced by a constant electric field. The demonstrated temperature of less than 10mK10\phantom{\rule{0.16em}{0ex}}\mathrm{mK}10mK at $4\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}3}\phantom{\rule{0.16em}{0ex}}\mathrm{Pa}$ is lower than that with the conventional optical cooling approach at this pressure by one to two orders of magnitude. Our results form the basis of manipulating cold charged nanoparticles and pave the way to quantum mechanical studies with trapped nanoparticles near their ground state.
We design and build a new experimental setup to demonstrate a mixture of a single nanoparticle and laser-cooled atoms. This system aims for investigating the low-energy scattering of ultracold atoms by a dielectric nanoparticle. The wave nature of the cold atoms manifests itself in both elastic and inelastic cross sections. In the new experimental system at Yokohama National University, we demonstrated optical trapping and cooling of a glass nanoparticle in vacuum. The ballistic Brownian motion of the nanoparticle in the harmonic potential was observed. We also demonstrated parametric cooling of the center of mass motion of the nanoparticle. We discuss the prospects for realization of a mixture of a single nanoparticle and laser-cooled atoms.
Optically levitated systems provide an ideal environment for isolating objects extremely well from the environment such that their behaviour can be more easily studied without external influences. Moreover, using optical detection, very high levels of sensitivity to that behaviour can be achieved, allowing precise detection of their motion and measurement of forces upon such a system. In the experiment we describe in this thesis, one can construct an optical gradient force trap by simply directing a collimated light beam onto a parabolic mirror with a sufficiently high numerical aperture. The resulting focusing not only generates the optical trapping potential but also allows detection as a particle trapped at the focal spot of the mirror has the light it scatters onto the mirror collimated and sent back in the direction of the incident trapping light beam. The trap described here allows levitation of dielectric nanoparticles with radii from 10nm to 300nm at pressures from 103 —10-8 mbar. In this thesis I describe the experimental setup and the theory describing a particle levitated in this setup, detailing how, from the detected light intensity on a photodetector, we can extract the properties describing the physical system, including the frequency of motion, the damping upon the motion, the temperature associated with the motion, the radius of the trapped nanoparticle and the conversion factor which allows us to convert from the photo-current measured by the detector to the physical displacement of the particle. Cooling of the translational motion to the ground state is a much targeted goal in the field of levitated optomechanics as it has applications in producing quantum states, performing matter-wave interferometry, testing collapse models and as a very precise force sensor. In this thesis I demonstrate and investigate a number of different cooling methods applied to the translational motion. First, I describe how one can utilise an FIR (Finite Impulse Response) band-pass filter to isolate the signal due to the motion of a single translational degree of freedom and utilise this to perform active feedback cooling upon this degree of freedom. I demonstrate this by implementing an FIR filter on a FPGA (Field Programmable Gate Array) and utilising it in real-time to cool the motion to 2.5K ± 0.4 K. Secondly I utilise a tracking algorithm called a Kalman Filter, I describe how this algorithm functions to track the state of objects from noisy partial measurements of the state and how this can be applied to track levitated nanoparticles. I then detail how this was implemented in an FPGA so that the Kalman Filter could be used in real-time to estimate the position of a levitated nanoparticle. We demonstrate cooling of the translation centre-of-mass motion along the optical axis by 3 orders of magnitude to a temperature of 162mK ± 15 mK. Next I describe a classical model of the motion of a levitated nanoparticle and describe how this model can be simulated numerically to produce simulated time traces of the motion. I then demonstrate how this simulation can be used to reproduce several theoretical relations as well as reproduce experimental results and be utilised to simulate and test the performance of cooling algorithms without requiring experimental implementation. Next I use this simulation to model the effect of a Dung non-linearity in the trapping potential. I match the behaviour of the simulation when exposed to as a pulsed reduction of the laser power with the behaviour of the experimental system when exposed to the same stimulus and in doing so extract the Dung non-linearity in the optical trapping potential generated by the parabolic mirror, which takes a value of ξ = -0.100 m-2. Finally I describe a quantum model of the motion of a levitated nanosphere, which takes into account the various decoherence sources in the experimental system, namely the interaction with the background gas, the laser photons and decoherence due to the measurement. Using this I investigate several different forms of active feedback cooling, including the "optimal" cooling as determined from the tools of control theory, which takes the form of a square wave, and the more traditional sinusoidal feedback signal. In addition I compare both linear cooling by applying a force directly to the nanoparticle and quadratic cooling by modulating the power of the trapping laser. I determine that cooling to mean phonon numbers of less than 10 with the current experimental setup is achievable utilising any of the feedback schemes described here when they are tuned appropriately.
The motion control of a levitated nanoparticle plays a central role in optical levitation for fundamental studies and practical applications. Here, we presented digital parametric feedback cooling based on square wave modulation by switching trapping laser intensity between two levels. The effects of the modulation depth and modulation signal phase on the cooling result were investigated in detail. Using such a digital parametric feedback method, the center-of-mass temperature of all three motional degrees of freedom can be cooled to dozens of millikelvin. The flexibility and agility of the digital feedback control pave the way for a variety of motion control modes.