Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of the IEEE

Millimeter and submillimeter wave detection and mixing with superconducting weak links

P. L. Richards, F. Auracher, T. Van Duzer

Published Jan 1, 1973• 41 citations
Publisher

Abstract

A weak link between two bulk superconductors can exhibit Josephson effects and can be used as a fast sensitive detector or mixer for electromagnetic radiation. Emphasis is placed on the millimeter and submillimeter range where such applications are potentially most important, though such devices should also work well at lower frequencies. The peculiar properties of the weak link make possible a variety of modes of operation including one in which it is both local oscillator and mixer. These modes of operation are analyzed and the pivotal experiments are reviewed. Noise and impedance matching are considered and comparison is made with other types of detectors of millimeter and submillimeter waves.

DOI
10.1109/proc.1973.8967

Related papers

Superconducting devices for millimeter and submillimeter wavelengths

P. L. Richards

Josephson junctions are highly nonlinear and respond up to infrared frequencies. A wide variety of high frequency applications have been explored. In addition, several high frequency superconducting devices are being developed which do not use the Josephson effect. These include a superconducting version of the Schottky barrier diode for use as a heterodyne mixer and a video detector, and also a composite superconducting bolometer. In this review, the state of development of superconducting mixers, detectors, and parametric amplifiers at microwave, millimeter, and submillimeter wavelengths is discussed. Emphasis will be placed on developments which have taken place since 1974 when a previous review was circulated.

De Gruyter eBooks•Dec 31, 1977•7 citations

Millimeter and submillimeter wave mixers based on superconducting weak links

Janusz Konopka, I. Wolff

Principles of operation of superconducting mixers based on: Superconductor-Insulator-Superconductor (SIS) tunnel junctions, Josephson junctions in high temperature superconductors and on superconducting hot-electron-microbolometers are presented. Most recent results on all types of superconducting mixers, with special attention paid to noise properties is reviewed.

International Conference on Microwaves, Radar & Wireless Communications•Nov 27, 2002•0 citations

THE JOSEPHSON JUNCTION AS A 100 GHz OSCILLATOR-MIXER,

Andrew Longacre, Sidney Shapiro

Abstract : The term 'Josephson effects' refers to a number of unusual properties of current flow through a barrier or weak link between two superconductors. Such a structure--called a Josephson junction--gives rise to frequency conversion effects that suggest its use as an oscillator-mixer in the millimeter and submillimeter region. Such a device would offer high sensitivity, broad bandwidth, tunability, and, in certain modes of operation, the possibility of conversion gain. These frequency conversion effects were observed in the range of 100 GHz to 600 GHz and beyond. The junctions were driven by a 75 GHz or 25 GHz klystron while coupled either to a coaxial cavity resonant at 20 GHz or to a resonance at about 500 GHz associated with the junction structure. Lines in the junction voltage-current characteristic were observed which demonstrated that, at certain values of junction bias, power at the rf--or its harmonics--was converted to power at the resonance frequency. An explanation of the experiment is given together with the necessary background, which provides the basis for a discussion of such operational considerations as upper frequency limit, sensitivity, temperature of operation, and saturation behavior at high signal levels. (Author)

•Apr 1, 1970•1 citation

Submillimeter-wave detection with superconducting tunnel diodes

Michael J. Wengler

The review presents a theoretical framework for understanding submillimeter detection using an optical photodiode theory. Both gain and noise in the superconductor-insulator-superconductor (SIS) mixer are described in terms of mixing on a photodiode. The role of impedance matching in the proper design of an SIS mixer is described. A variety of methods for achieving good impedance match at submillimeter frequencies are presented. The state of the submillimeter SIS mixer art as practiced in a variety of laboratories is described and summarized.>

Proceedings of the IEEE•Jan 1, 1992•71 citations

ミリ波・サブミリ波検出器

Kazuo Fujisawa

In this report, Josephson junction detectors for millimeter and submillimeter waves are surveyed. Emphasis is placed on heterodyne detectors (mixers). Others are briefly referred to, such as video detectors, bolometers, quasiparticle mixers and parametric amplifiers. Also, three kinds of Josephson junctions for detector use are mentioned and brief comments are given on them. These are tunnel junctions, thin film microbridges and point contacts.Thermally cyclable oxide barrier tunnel junctions have been obtained and used as low noise quasiparticle mixers at 115GHz. They have lower noise temperatures compared to Josephson effect mixers, but the receiver noise temperatures are not lowered owing to their lower conversion efficiencies. Thin film microbridges suffer from low junction resistances and also from heating effects caused by d.c. bias supply and r.f. incident power. There seems to exist many problems to be overcome in order to make good submillimeter wave detectors by tunnel junctions or microbridges.Point contacts are now widely used as sensitive detectors for millimeter and submillimeter waves. Although there exist difficulties for making rugged and thermally cyclable point contacts, the techniques for making them have made considerable progress, and a new construction of detector mount has appeared, which brought a low noise mixer at 115GHz thermally cyclable.It is shown that the sensitivity of video detectors decreases as proportional to the inverse square of frequency. So, for submillimeter waves, video detectors are inferior to superconducting bolometers.Recent progress in heterodyne detectors (fundamental and harmonic mixers) are touched on. They are superior to Shottky diode mixers in that they have much smaller NEP's and much higher conversion efficiencies (especially in harmonic mixers), and also in that they operate with much smaller LO power. Experimental curves of IF output power v.s. bias voltage are given for harmonic mixers with harmonic number N=7 and N=10. It is noted that harmonic mixers with even harmonic number are preferable, because they can operate at zero bias voltage. Among them, low even numbers 2 or 4 are recommended in regards to good conversion efficiency.By using Josephson junctions, a peculiar parametric operation is possible, namely doubly degenerate mode. This mode operates under zero d.c. bias by choosing pump frequency as 2ωp=ωs+ωi, ωp-ωs-ωi. Zero bias operation allows the adoption of microbridge arrays. A parametric amplifier with 160 microbridge arrays was built at 33GHz, and showed amplifier gain of 15dB and noise temperature of 20K.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 1980•0 citations

Superconductive devices for millimeter wave detection, mixing, and amplification

P. L. Richards, Tek-Ming Shen

Single-particle (quasi-particle) tunneling through an insulating barrier between two superconductors or between a superconductor and a normal conductor is being used to make very-low-noise detectors and mixers for millimeter wavelengths. The nonlinearity of theI-Vcurve obtained from tunneling between two superconductors can be so strong that classical theory breaks down and photon-assisted tunneling theory must be used to understand device performance. Quantum theory predicts that a quasi-particle tunnel junction can be operated as a microwave photon detector with quantum efficiency close to unity or as a heterodyne mixer with conversion gain and with mixer noise temperature comparable with the quantum noise limitT_{M} =\bar{h}\omega/k. Both of these predictions have been experimentally realized at 36 GHz using superconductor-insulator-superconductor (SIS) junctions. It appears probable that these quasi-particle detectors and mixers will supercede the corresponding Josephson-effect devices at millimeter wavelengths.

IEEE Transactions on Electron Devices•Oct 1, 1980•61 citations
A weak link between two bulk superconductors can exhibit Josephson effects and can be used as a fast sensitive detector or mixer for electromagnetic radiation. Emphasis is placed on the millimeter and submillimeter range where such applications are potentially most important, though such devices should also work well at lower frequencies. The peculiar properties of the weak link make possible a variety of modes of operation including one in which it is both local oscillator and mixer. These modes of operation are analyzed and the pivotal experiments are reviewed. Noise and impedance matching are considered and comparison is made with other types of detectors of millimeter and submillimeter waves.
Josephson junctions are highly nonlinear and respond up to infrared frequencies. A wide variety of high frequency applications have been explored. In addition, several high frequency superconducting devices are being developed which do not use the Josephson effect. These include a superconducting version of the Schottky barrier diode for use as a heterodyne mixer and a video detector, and also a composite superconducting bolometer. In this review, the state of development of superconducting mixers, detectors, and parametric amplifiers at microwave, millimeter, and submillimeter wavelengths is discussed. Emphasis will be placed on developments which have taken place since 1974 when a previous review was circulated.
Abstract : The term 'Josephson effects' refers to a number of unusual properties of current flow through a barrier or weak link between two superconductors. Such a structure--called a Josephson junction--gives rise to frequency conversion effects that suggest its use as an oscillator-mixer in the millimeter and submillimeter region. Such a device would offer high sensitivity, broad bandwidth, tunability, and, in certain modes of operation, the possibility of conversion gain. These frequency conversion effects were observed in the range of 100 GHz to 600 GHz and beyond. The junctions were driven by a 75 GHz or 25 GHz klystron while coupled either to a coaxial cavity resonant at 20 GHz or to a resonance at about 500 GHz associated with the junction structure. Lines in the junction voltage-current characteristic were observed which demonstrated that, at certain values of junction bias, power at the rf--or its harmonics--was converted to power at the resonance frequency. An explanation of the experiment is given together with the necessary background, which provides the basis for a discussion of such operational considerations as upper frequency limit, sensitivity, temperature of operation, and saturation behavior at high signal levels. (Author)
The review presents a theoretical framework for understanding submillimeter detection using an optical photodiode theory. Both gain and noise in the superconductor-insulator-superconductor (SIS) mixer are described in terms of mixing on a photodiode. The role of impedance matching in the proper design of an SIS mixer is described. A variety of methods for achieving good impedance match at submillimeter frequencies are presented. The state of the submillimeter SIS mixer art as practiced in a variety of laboratories is described and summarized.>
In this report, Josephson junction detectors for millimeter and submillimeter waves are surveyed. Emphasis is placed on heterodyne detectors (mixers). Others are briefly referred to, such as video detectors, bolometers, quasiparticle mixers and parametric amplifiers. Also, three kinds of Josephson junctions for detector use are mentioned and brief comments are given on them. These are tunnel junctions, thin film microbridges and point contacts.Thermally cyclable oxide barrier tunnel junctions have been obtained and used as low noise quasiparticle mixers at 115GHz. They have lower noise temperatures compared to Josephson effect mixers, but the receiver noise temperatures are not lowered owing to their lower conversion efficiencies. Thin film microbridges suffer from low junction resistances and also from heating effects caused by d.c. bias supply and r.f. incident power. There seems to exist many problems to be overcome in order to make good submillimeter wave detectors by tunnel junctions or microbridges.Point contacts are now widely used as sensitive detectors for millimeter and submillimeter waves. Although there exist difficulties for making rugged and thermally cyclable point contacts, the techniques for making them have made considerable progress, and a new construction of detector mount has appeared, which brought a low noise mixer at 115GHz thermally cyclable.It is shown that the sensitivity of video detectors decreases as proportional to the inverse square of frequency. So, for submillimeter waves, video detectors are inferior to superconducting bolometers.Recent progress in heterodyne detectors (fundamental and harmonic mixers) are touched on. They are superior to Shottky diode mixers in that they have much smaller NEP's and much higher conversion efficiencies (especially in harmonic mixers), and also in that they operate with much smaller LO power. Experimental curves of IF output power v.s. bias voltage are given for harmonic mixers with harmonic number N=7 and N=10. It is noted that harmonic mixers with even harmonic number are preferable, because they can operate at zero bias voltage. Among them, low even numbers 2 or 4 are recommended in regards to good conversion efficiency.By using Josephson junctions, a peculiar parametric operation is possible, namely doubly degenerate mode. This mode operates under zero d.c. bias by choosing pump frequency as 2ωp=ωs+ωi, ωp-ωs-ωi. Zero bias operation allows the adoption of microbridge arrays. A parametric amplifier with 160 microbridge arrays was built at 33GHz, and showed amplifier gain of 15dB and noise temperature of 20K.
Single-particle (quasi-particle) tunneling through an insulating barrier between two superconductors or between a superconductor and a normal conductor is being used to make very-low-noise detectors and mixers for millimeter wavelengths. The nonlinearity of theI-Vcurve obtained from tunneling between two superconductors can be so strong that classical theory breaks down and photon-assisted tunneling theory must be used to understand device performance. Quantum theory predicts that a quasi-particle tunnel junction can be operated as a microwave photon detector with quantum efficiency close to unity or as a heterodyne mixer with conversion gain and with mixer noise temperature comparable with the quantum noise limitT_{M} =\bar{h}\omega/k. Both of these predictions have been experimentally realized at 36 GHz using superconductor-insulator-superconductor (SIS) junctions. It appears probable that these quasi-particle detectors and mixers will supercede the corresponding Josephson-effect devices at millimeter wavelengths.