Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Towards the creation of high-fidelity Fock states of neutral atoms

Medellin Salas, David de Jesus

Published Aug 1, 2013• 1 citation
OpenAlex

Abstract

This dissertation presents the implementation of a technique to generate atomic Fock states of Lithium 6 with ultra-high fidelity, called laser culling. Fock states, atomic states with a definite number of particles, are a mandatory step for studying few-body quantum phenomena such as quantum tunneling, quantum entanglement, and serve as building blocks for quantum simulators. The creation of ultra-high fidelity Fock states begins with a degenerate Fermi gas in an optical dipole trap. Being fermions, lithium-6 atoms fill the energy levels of the dipole trap with 2 atoms per energy level. Introducing a magnetic field gradient creates a linear potential that tilts the potential produced by the optical dipole trap. The initially bound energy levels become quasi-bound states, each with a different lifetime. By exploiting the difference between these lifetimes, one can generate a single pair of atoms in the ground state of the trap with fidelities that can exceed 99.9%. This dissertation first presents the details of the design and construction of an apparatus for laser culling, and then reports on the progress made towards the creation of atomic Fock states with ultra-high fidelity.

Related papers

Experiments to control atom number and phase-space density in cold gases

Kirsten Viering

This dissertation presents the development and implementation of two novel experimental techniques for controlling atom number and phase-space density in cold atomic gases. The first experiment demonstrates the method of single-photon cooling, an optical realization of Maxwell's demon, using an ensemble of rubidium atoms. Single-photon cooling increases the phase-space density of a cloud of magnetically trapped atoms, reducing the entropy of the ensemble by irreversibly transferring atoms through a one-way wall via a single-photon scattering event. While traditional laser cooling methods are limited in their applicability to a small number of atoms, single-photon cooling is much more general and should in principle be applicable to almost all atoms in the periodic table. The experiment described in this dissertation demonstrates a one-dimensional implementation of the cooling scheme. Complete phase-space compression along this dimension is observed. The limitations on the cooling performance are shown to be given by trap dynamics in the magnetic trap. The second part of this dissertation is dedicated to the experiment built to control the atom number of a degenerate Fermi gas on a single particle level. Creating Fock states of atoms with ultra-high fidelity is a mandatory step for studying quantum entanglement on a single atom level. The experimental technique implemented to control the atom number in this experiment is called laser culling. Decreasing the trapping potential reduces the atom number in a controlled way, giving precise control over the number of atoms remaining in the trap. This dissertation details the design and construction of this experiment and reports on the progress towards the creation of neutral lithium Fock states.

•Aug 1, 2012•1 citation

Towards the creation of Fock states of atoms

Hrishikesh Kelkar

Ultracold atoms have been successfully used to study numerous systems, previously unaccessible, but a precise control over the atom number of the sample still remains a challenge. This dissertation describes our progress towards achieving Fock states of atoms. The first three chapters cover the basic physics necessary to understand the techniques we use in our lab to manipulate atoms. We then summarize our experimental results from an earlier setup where we did two experiments. In the first experiment we compare the transport of cold atoms and a Bose Einstein Condensate (BEC) in a periodic potential. We find a critical potential height beyond which the condensate behavior deviates significantly from that of thermal atoms. In the second experiment we study the effect of periodic temporal kicks by a spatially periodic potential on a BEC in a quasi one dimensional trap. We observe a limit on the energy that the system can absorb from the kicks, which we conclude is due to the finite height of the trap rather than quantum effects. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during transport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during tr₀ansport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during transport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during transport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection.

Bulletin of the American Physical Society•May 22, 2009•0 citations

Atomic Fock states and quantum computing

Shoupu Wan

The potential impact of quantum computing has stimulated a worldwide effort to develop the necessary experimental and theoretical resources. In \nthe race for the quantum computer, several candidate systems have emerged, but the ultimate system is still unclear. We study theoretically how to realize atomic Fock states both for fermionic and bosonic atoms, mainly in \none-dimensional optical traps. We demonstrate a new approach of quantum \ncomputing based on ultracold fermionic atomic Fock states in optical traps. \nWith the Pauli exclusion principle, producing fermionic atomic Fock \nstates in optical traps is straightforward. We find that laser culling of fermionic \natoms in optical traps can produce a scalable number of ultra-high fidelity \nqubits. We show how each qubit can be independently prepared, and how \nto perform the required entanglement operations and detect the qubit states with spatially resolved, single-atom detection with adiabatic trap-splitting and \nfluorescence imaging. On the other hand, bosonic atoms have a strong tendency to stay together. One must rely on strong repulsive interactions to produce bosonic \natomic Fock states. To simulate the physical conditions of producing Fock \nstates with ultracold bosonic atoms, we study a many-boson system with arbitrary interaction strength using the Bethe ansatz method. This approach \nprovides a general framework, enabling the study of Fock state production \nover a wide range of realistic experimental parameters.

•Aug 1, 2009•1 citation

A single apparatus for the production of ultracold fermionic lithium and cold bosonic caesium gases

Asaf Paris-Mandoki

Ultracold mixture experiments hold the promise of providing new insights into many-body quantum systems as well as ultracold chemistry and few-body phenomena. The work presented in this thesis dealt with the construction of a new apparatus for the production and study of ultracold gases of fermionic lithium-6 and bosonic caesium-133. These isotopes offer a wide tunability in their interaction strength, both in inter-species and intra-species collisions, through magnetic Feshbach resonances. Additionally, the widely different resonance frequencies of lithium and caesium enables independent control of each of the species. With this apparatus, Bose-Einstein condensates (BEC) containing 10^4 lithium Feshbach molecules are routinely produced. The cooling system for caesium has been developed in parallel and important steps towards producing ultracold caesium gases have been made. An optical dipole trap has been loaded with 2x10^6 caesium atoms and evaporative cooling towards quantum degeneracy can now be pursued. Laser, vacuum, magnetic and control systems have been developed for the implementation of this experiment. Light produced with this laser system was used to laser cool atoms, create conservative dipole traps as well as to provide means of imaging atomic clouds. Additionally, a system to produce strong magnetic fields of up to 1400 G has been established in order to exploit the wide tunability in the atomic interactions. Software that was developed for the computerised control system facilitated the coordination of all the components involved in the experimental sequence. Measurements and calculations that showcase the functionality of relevant parts of the setup are presented in this thesis. In this experiment, lithium and caesium atoms are obtained from a novel type of Zeeman slower and are loaded into a magneto-optical trap (MOT). The system is capable of doing this independently for each of the atomic species as well as sequentially. After the MOT has been loaded with atoms, they are transferred into a conservative far-off-resonance optical dipole trap. By adjusting the interactions between atoms and lowering the depth of the dipole trap, efficient evaporative cooling of lithium was carried out from which a molecular BEC was obtained. Time-of-flight measurements were used to characterise the condensate and study its expansion dynamics.

•Dec 10, 2015•0 citations

An apparatus for the production of molecular Bose-Einstein condensates

Thomas Lompe

This thesis reports on the construction of an apparatus capable of producing a molecular Bose-Einstein-Condensate (BEC) of 6Li2. To create a condensate fermionic lithium is first evaporated in an oven, slowed by a Zeeman slower and captured in a magneto-optical-trap (MOT). A scheme for creating time-averaged arbitrary optical potentials for optimized transfer of the atoms from the MOT to a high-power, far detuned optical dipole trap was implemented, as well as magnetic field coils to tune the interactions of the atoms via Feshbach resonances. The first experiments with the new machine include the characterization of the optical dipole trap and evaporative cooling of 6Li.

•Jan 1, 2008•1 citation

Erbium quantum gas microscope

Aaron Krahn

Quantum gas microscopy of dipolar atoms is a promising opportunity to expand upon previous quantum simulations of neutral atoms in optical lattices. Erbium atoms interact via the long-range magnetic dipole-dipole interaction, which leads to a variety of new many-body effects and strongly correlated phases that are currently unexplored in microscopes with only short-range interactions. In this thesis I will detail progress toward the construction of an erbium quantum gas microscope as well as the techniques we implemented to produce a Bose-Einstein condensate of $8\times10^4$ atoms in under a second. These include the installation of a dual-stage magneto-optical trap, a stroboscopic optical dipole trap, as well as a tunable crossed optical dipole trap that allows for efficient evaporation of both bosonic and fermionic isotopes. I will also discuss the frequency stabilization systems we have implemented to produce laser linewidths of less than $1$ kHz for near-resonant laser cooling on narrow transitions and a custom, high NA reflective objective to be used as part of a high resolution imaging system. Finally, I will discuss the noise properties of charge-coupled devices and the photon counting techniques that are needed for having high fidelities while using fast imaging schemes.

•Jan 20, 2021•1 citation
This dissertation presents the implementation of a technique to generate atomic Fock states of Lithium 6 with ultra-high fidelity, called laser culling. Fock states, atomic states with a definite number of particles, are a mandatory step for studying few-body quantum phenomena such as quantum tunneling, quantum entanglement, and serve as building blocks for quantum simulators. The creation of ultra-high fidelity Fock states begins with a degenerate Fermi gas in an optical dipole trap. Being fermions, lithium-6 atoms fill the energy levels of the dipole trap with 2 atoms per energy level. Introducing a magnetic field gradient creates a linear potential that tilts the potential produced by the optical dipole trap. The initially bound energy levels become quasi-bound states, each with a different lifetime. By exploiting the difference between these lifetimes, one can generate a single pair of atoms in the ground state of the trap with fidelities that can exceed 99.9%. This dissertation first presents the details of the design and construction of an apparatus for laser culling, and then reports on the progress made towards the creation of atomic Fock states with ultra-high fidelity.
This dissertation presents the development and implementation of two novel experimental techniques for controlling atom number and phase-space density in cold atomic gases. The first experiment demonstrates the method of single-photon cooling, an optical realization of Maxwell's demon, using an ensemble of rubidium atoms. Single-photon cooling increases the phase-space density of a cloud of magnetically trapped atoms, reducing the entropy of the ensemble by irreversibly transferring atoms through a one-way wall via a single-photon scattering event. While traditional laser cooling methods are limited in their applicability to a small number of atoms, single-photon cooling is much more general and should in principle be applicable to almost all atoms in the periodic table. The experiment described in this dissertation demonstrates a one-dimensional implementation of the cooling scheme. Complete phase-space compression along this dimension is observed. The limitations on the cooling performance are shown to be given by trap dynamics in the magnetic trap. The second part of this dissertation is dedicated to the experiment built to control the atom number of a degenerate Fermi gas on a single particle level. Creating Fock states of atoms with ultra-high fidelity is a mandatory step for studying quantum entanglement on a single atom level. The experimental technique implemented to control the atom number in this experiment is called laser culling. Decreasing the trapping potential reduces the atom number in a controlled way, giving precise control over the number of atoms remaining in the trap. This dissertation details the design and construction of this experiment and reports on the progress towards the creation of neutral lithium Fock states.
Ultracold atoms have been successfully used to study numerous systems, previously unaccessible, but a precise control over the atom number of the sample still remains a challenge. This dissertation describes our progress towards achieving Fock states of atoms. The first three chapters cover the basic physics necessary to understand the techniques we use in our lab to manipulate atoms. We then summarize our experimental results from an earlier setup where we did two experiments. In the first experiment we compare the transport of cold atoms and a Bose Einstein Condensate (BEC) in a periodic potential. We find a critical potential height beyond which the condensate behavior deviates significantly from that of thermal atoms. In the second experiment we study the effect of periodic temporal kicks by a spatially periodic potential on a BEC in a quasi one dimensional trap. We observe a limit on the energy that the system can absorb from the kicks, which we conclude is due to the finite height of the trap rather than quantum effects. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during transport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during tr₀ansport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during transport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during transport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection.
The potential impact of quantum computing has stimulated a worldwide effort to develop the necessary experimental and theoretical resources. In \nthe race for the quantum computer, several candidate systems have emerged, but the ultimate system is still unclear. We study theoretically how to realize atomic Fock states both for fermionic and bosonic atoms, mainly in \none-dimensional optical traps. We demonstrate a new approach of quantum \ncomputing based on ultracold fermionic atomic Fock states in optical traps. \nWith the Pauli exclusion principle, producing fermionic atomic Fock \nstates in optical traps is straightforward. We find that laser culling of fermionic \natoms in optical traps can produce a scalable number of ultra-high fidelity \nqubits. We show how each qubit can be independently prepared, and how \nto perform the required entanglement operations and detect the qubit states with spatially resolved, single-atom detection with adiabatic trap-splitting and \nfluorescence imaging. On the other hand, bosonic atoms have a strong tendency to stay together. One must rely on strong repulsive interactions to produce bosonic \natomic Fock states. To simulate the physical conditions of producing Fock \nstates with ultracold bosonic atoms, we study a many-boson system with arbitrary interaction strength using the Bethe ansatz method. This approach \nprovides a general framework, enabling the study of Fock state production \nover a wide range of realistic experimental parameters.
Ultracold mixture experiments hold the promise of providing new insights into many-body quantum systems as well as ultracold chemistry and few-body phenomena. The work presented in this thesis dealt with the construction of a new apparatus for the production and study of ultracold gases of fermionic lithium-6 and bosonic caesium-133. These isotopes offer a wide tunability in their interaction strength, both in inter-species and intra-species collisions, through magnetic Feshbach resonances. Additionally, the widely different resonance frequencies of lithium and caesium enables independent control of each of the species. With this apparatus, Bose-Einstein condensates (BEC) containing 10^4 lithium Feshbach molecules are routinely produced. The cooling system for caesium has been developed in parallel and important steps towards producing ultracold caesium gases have been made. An optical dipole trap has been loaded with 2x10^6 caesium atoms and evaporative cooling towards quantum degeneracy can now be pursued. Laser, vacuum, magnetic and control systems have been developed for the implementation of this experiment. Light produced with this laser system was used to laser cool atoms, create conservative dipole traps as well as to provide means of imaging atomic clouds. Additionally, a system to produce strong magnetic fields of up to 1400 G has been established in order to exploit the wide tunability in the atomic interactions. Software that was developed for the computerised control system facilitated the coordination of all the components involved in the experimental sequence. Measurements and calculations that showcase the functionality of relevant parts of the setup are presented in this thesis. In this experiment, lithium and caesium atoms are obtained from a novel type of Zeeman slower and are loaded into a magneto-optical trap (MOT). The system is capable of doing this independently for each of the atomic species as well as sequentially. After the MOT has been loaded with atoms, they are transferred into a conservative far-off-resonance optical dipole trap. By adjusting the interactions between atoms and lowering the depth of the dipole trap, efficient evaporative cooling of lithium was carried out from which a molecular BEC was obtained. Time-of-flight measurements were used to characterise the condensate and study its expansion dynamics.
This thesis reports on the construction of an apparatus capable of producing a molecular Bose-Einstein-Condensate (BEC) of 6Li2. To create a condensate fermionic lithium is first evaporated in an oven, slowed by a Zeeman slower and captured in a magneto-optical-trap (MOT). A scheme for creating time-averaged arbitrary optical potentials for optimized transfer of the atoms from the MOT to a high-power, far detuned optical dipole trap was implemented, as well as magnetic field coils to tune the interactions of the atoms via Feshbach resonances. The first experiments with the new machine include the characterization of the optical dipole trap and evaporative cooling of 6Li.
Quantum gas microscopy of dipolar atoms is a promising opportunity to expand upon previous quantum simulations of neutral atoms in optical lattices. Erbium atoms interact via the long-range magnetic dipole-dipole interaction, which leads to a variety of new many-body effects and strongly correlated phases that are currently unexplored in microscopes with only short-range interactions. In this thesis I will detail progress toward the construction of an erbium quantum gas microscope as well as the techniques we implemented to produce a Bose-Einstein condensate of 8×1048\times10^48×104 atoms in under a second. These include the installation of a dual-stage magneto-optical trap, a stroboscopic optical dipole trap, as well as a tunable crossed optical dipole trap that allows for efficient evaporation of both bosonic and fermionic isotopes. I will also discuss the frequency stabilization systems we have implemented to produce laser linewidths of less than 111 kHz for near-resonant laser cooling on narrow transitions and a custom, high NA reflective objective to be used as part of a high resolution imaging system. Finally, I will discuss the noise properties of charge-coupled devices and the photon counting techniques that are needed for having high fidelities while using fast imaging schemes.