Ultracold atoms have been successfully used to study numerous systems, previously unaccessible, but a precise control over the atom number of the sample still remains a challenge. This dissertation describes our progress towards achieving Fock states of atoms. The first three chapters cover the basic physics necessary to understand the techniques we use in our lab to manipulate atoms. We then summarize our experimental results from an earlier setup where we did two experiments. In the first experiment we compare the transport of cold atoms and a Bose Einstein Condensate (BEC) in a periodic potential. We find a critical potential height beyond which the condensate behavior deviates significantly from that of thermal atoms. In the second experiment we study the effect of periodic temporal kicks by a spatially periodic potential on a BEC in a quasi one dimensional trap. We observe a limit on the energy that the system can absorb from the kicks, which we conclude is due to the finite height of the trap rather than quantum effects. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during transport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during tr₀ansport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during transport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection. The majority of the dissertation discusses our experimental setup designed to produce Fock states. The setup is designed to use the method of laser culling to produce Fock states. We are able to create a BEC and transport it into a glass cell 25 cm away. We tried different innovative methods to reduce vibrations during transport before finally settling to a commercial air bearing translation stage. We create a high confinement one dimensional optical trap using the Hermite Gaussian TEM₀₁ mode of a laser beam. Such a trap gives trapping frequencies comparable to an optical lattice and allows us to create a single one dimensional trap. We creating the TEM₀₁ mode using an appropriate phase object (phase plate) in the path of a TEM₀₀ mode beam. The method for producing the phase plate was very well controlled to obtain a good quality mode. Once the atoms are loaded into this one dimensional trap we can proceed to do laser culling to observe Sub-Poissonian number statistics and eventually create Fock states of few atoms. Finally, we describe a novel method to create a real time tunable optical lattice which would provide us with the ability of spatially resolved single atom detection.
This dissertation presents the implementation of a technique to generate atomic Fock states of Lithium 6 with ultra-high fidelity, called laser culling. Fock states, atomic states with a definite number of particles, are a mandatory step for studying few-body quantum phenomena such as quantum tunneling, quantum entanglement, and serve as building blocks for quantum simulators. The creation of ultra-high fidelity Fock states begins with a degenerate Fermi gas in an optical dipole trap. Being fermions, lithium-6 atoms fill the energy levels of the dipole trap with 2 atoms per energy level. Introducing a magnetic field gradient creates a linear potential that tilts the potential produced by the optical dipole trap. The initially bound energy levels become quasi-bound states, each with a different lifetime. By exploiting the difference between these lifetimes, one can generate a single pair of atoms in the ground state of the trap with fidelities that can exceed 99.9%. This dissertation first presents the details of the design and construction of an apparatus for laser culling, and then reports on the progress made towards the creation of atomic Fock states with ultra-high fidelity.
The power of quantum computation derives from algorithmic methods that exploit the availability of quantum superposition and entanglement to perform computations that are intractable with classical devices. The race is on to develop hardware that will unleash the promise of quantum algorithms. A handful of different types of hardware are currently being developed with the greatest efforts directed at superconducting, quantum-dot, trapped-ion, photonic, and neutral-atom approaches [1]. While all approaches have strengths and weaknesses, and are at different stages of development, the challenge of creating a practical design that can be scaled to a million or more qubits has not yet been met with any of the existing platforms. One may wonder if we really need a million qubits for a useful quantum computer. The answer depends on our ambition level. On the one hand it is widely believed that a quantum computer with less than 100 reliable qubits will be able to demonstrate a quantum advantage for a well defined computational problem [2]. Demonstration of a quantum computational advantage will generate great excitement in the halls of academia, but will have little broader import. A problem of great practical interest such as ab initio design of chemicals for increasing the yield of fertilizers for crop production, to name but one example, may also require just a few hundred qubits, provided computational sequences with circuit depth of 1010 or more operations can be reliably performed [3]. However, given the current performance of qubit hardware, which has demonstrated error rates not less than ∼10−3, computations with depth 1010 will only produce random outcomes of negligible value. The solution lies in the construction of error-correction circuitry operating on logical qubits, each composed of many physical qubits, which will enable logical error rates many orders of magnitude smaller than physical error rates. Although error correction is remarkably efficient for classical computing devices—Hamming codes detect and correct errors while only requiring roughly 10% overhead in the number of physical bits—quantum error correction is notoriously expensive. New approaches to error correction are the subject of intensive research with one promising direction being the development of codes that are optimized to suppress the dominant error mechanism in a particular physical platform [4,5]. Nevertheless, with physical error rates of 10−4, a plausible target for current qubit systems, the overhead required to reach logical error rates of 10−10 may be measured in thousands of physical qubits for each logical qubit. Thus a quantum computer able to perform deep calculations on a few hundred logical qubits could require a million physical qubits. A consequence of the cost of quantum error correction is that any viable approach to large-scale quantum computing needs to combine high-fidelity quantum logic operations with a capability for integrating large numbers of physical qubits. From this perspective neutral-atom qubits appear particularly promising [6] as they have already demonstrated control of more qubits than any other platform with recent experiments in 1D [7], 2D [8,9], and 3D [10] geometries showing control of up to 50 atomic qubits. Large qubit arrays can potentially be prepared in 1D, 2D, or 3D geometries. The number of proximal qubits increases with the dimensionality, which is advantageous for implementation of error correction code words, and points towards a preference for 2D or 3D arrays. On the other hand, the added overhead of compensating crosstalk incurred when targeting atoms inside a 3D volume makes parallel operations on multiple qubits challenging. A 2D geometry, as shown schematically in Fig. 1, may be an optimal choice since qubit control and measurement can be performed with lasers propagating normal to the plane of the array so that individual qubit sites can be addressed independently. With demonstrated array periods of a few micrometers we require a footprint of less than 1 mm2 for 104 qubits. Conceptual picture of a 2D neutral-atom qubit array. a) High-numerical-aperture lenses project several different wavelengths of light for control and measurement of the qubits. Specific choices of optical wavelengths depend on the atomic species. Not shown are optics for initial laser cooling, transport to the array, beam scanning, and imaging for qubit measurement. b) Averaged fluorescence image of 49 atomic qubits on a 2D grid with |
3.8μm| spacing [8]. From a fundamental perspective the prospects for scaling neutral-atom systems are particularly promising due to the exceptionally large ratio between coherent and incoherent coupling rates. Neutral-atom qubits are encoded in hyperfine ground states for which coherence times of the order of 10 s have been demonstrated [10]. This implies a dephasing rate |
γ∼0.1s−1|. The coherent coupling that enables quantum logic operations is switched on by exciting atoms to high-lying Rydberg states with principal quantum number close to 100 [11,12]. Rydberg excited atoms at spacings of a few micrometers in an optical lattice interact coherently with rates |
g>109s−1|. The ratio between desired coherent coupling and residual incoherent dephasing of g/γ ∼ 1010 establishes a figure of merit that is enabling for scalability. To our knowledge only trapped ions can claim a similar g/γ ratio [13], but without a correspondingly direct path towards controlling thousands of qubits in a single processing unit. Although the g/γ ratio is exceptionally favorable for neutral-atom qubits a complete set of universal gate operations has not yet been demonstrated with high fidelity. Single-qubit gates in large 2D and 3D arrays have reached fidelity |
F∼0.999| [8,10]. However, the highest demonstrated fidelity for two-qubit entanglement mediated by Rydberg-state interactions is |
F<0.8| [6,14,15], a value that is well short of the theoretical limit of |
F>0.9999| [16,17]. There is healthy optimism within the research community working with neutral-atom qubits that combining improved laser sources with reduced noise, better cooling to reduce motional dephasing, and control of stray electric fields that perturb Rydberg atoms will lead to substantially improved gate fidelity in the near future. Recent results with better filtering of laser phase noise have already demonstrated remarkable improvement in ground–Rydberg entanglement [18]. The outlook for the next few years appears very promising. We anticipate that with advances in lasers, optical lattices for atom trapping, deterministic rearrangement and loading of atoms in multi-dimensional arrays [19,20], and optics for fast beam scanning it will be possible to increase the number of physical qubits in a single neutral-atom module to at least 104. A challenging yet plausible path to a million-qubit processor can then be contemplated by connecting 100 such modules with atom–photon entanglement channels [21]. Beyond the potential for advancing the state of the art in computation, development of techniques for single-atom control inside large multi-atom arrays will enable other applications of quantum science including metrology and time-keeping. Rydberg interactions that are at the heart of a neutral-atom quantum computer may lead to multi-atom entanglement and Heisenberg scaling of atomic-clock precision [22]. This work was supported by the NSF and ARL CDQI.
In quantum computers, the superposition of quantum states is used to perform calculations that are theoretically impossible or infeasible with classical computers, such as solving the traveling salesman problem for many nodes or conducting unstructured searches for large databases. Due to its scalable and flexible nature, neutral atoms trapped in optical tweezers are a promising technology for performing quantum computation. Here, qubit configurations are not static, allowing arbitrary geometries to be realized, and schemes where qubits are exchanged are readily available. The quantum level structure of neutral atoms is used to encode a qubit between two states, forming the basis for quantum computing. As the atoms are cooled to their electronic and motional ground states, transitions between qubit zero and qubit one can be driven with high fidelity. A multi-qubit gate is then realized when two or more atoms interact, e.g., by moving them close together, or by increasing their dipole radius when they are excited to a Rydberg state. Up to now, different qubits have been realized in neutral atoms, most notably ⁸⁷Rb, where the electronic ground state splits into two sublevels, which are used as encoding of a qubit. We describe progress on realizing a quantum computer based on ⁸⁸Sr. As a boson, its electronic ground state exhibits no hyperfine splitting, such that SPAM errors can be eliminated. The qubit is encoded in the ground state together with the highly studied, long-lived clock state, allowing for high-fidelity control of the transition. In this thesis, we present how the apparatus creates an ultra-high vacuum, as long-lived atoms are necessary for high-performance quantum algorithms. We show the main ideas behind the laser systems used for cooling, trapping, and driving the single-qubit transition. Our work demonstrates that coherently moving atoms is a feasible operation in quantum computing, allowing for the exchange of qubits, the shuttling of qubits to separate registers, or enabling additional phase gates. The results presented here establish ⁸⁸Sr as a viable candidate for quantum computing and lay the foundation for future fault-tolerant quantum systems.
We investigate the possibility of forming high-fidelity atomic Fock states by gradual reduction of a quasi-one-dimensional trap containing spin-polarized fermions or strongly interacting bosons in the Tonk-Girardeau regime. Making the trap shallower and simultaneously squeezing it can lead to the preparation of an ideal atomic Fock state as one approaches either the sudden or the adiabatic limits. Nonetheless, the fidelity of the resulting state is shown to exhibit nonmonotonic behavior with the time scale in which the trapping potential is changed.
Ultracold atoms in optical lattices provide an extremely clean and controllable setting to explore quantum many-body phases of matter. Here we give a brief review of the strong-correlation physics that has been realized using such ultracold atoms in optical lattices ranging from the realization of Hubbard models to studies of quantum magnetism and the detection of single atoms with lattice site resolution. All this has opened up fundamentally new opportunities for the investigation of quantum many-body systems. Introduction Over the past years, ultracold atoms in optical lattices have emerged as versatile new systems to explore the physics of quantum many-body systems. On the one hand, they can be helpful in gaining a better understanding of known phases of matter and their dynamical behavior; on the other hand, they allow one to realize completely novel quantum systems that have not been studied before in nature [1, 2, 3]. Commonly, the approach of exploring quantum many-body systems in such a way is referred to as “quantum simulations.” Examples of some of the first strongly interacting many-body phases that have been realized both in lattices and in the continuum include the quantum phase transition from a superfluid to a Mott insulator [4, 5, 6], fermionic Mott insulators [7, 8], the achievement of a Tonks- Girardeau gas [9, 10], and the realization of the Bose-Einsten condensate (BEC)– Bardeen-Cooper-Schrieffer (BCS) crossover (see also Chapter 12) in Fermi gas mixture [11] using Feshbach resonances [12]. In almost all of these experiments, detection was limited to time-of-flight imaging or more refined derived techniques that mainly characterized the momentum distribution of the quantum gas [2]. For several years, researchers in the field have therefore aspired to employ in situ single-particle detection methods for the analysis of ultracold quantum gases. Only recently has it become possible to implement such imaging techniques, marking a milestone for the characterization and manipulation of ultracold quantum gases [13, 14, 15, 16, 17]. In our discussion, we will focus on one of the most successful of these techniques based on high-resolution fluorescence imaging. Despite being a rather new technique, such quantum gas microscopy has already proven to be an enabling technology for probing and manipulating quantum many-body systems. For the first time, controllable and strongly interacting many-body systems, as realized with ultracold atoms, could be observed on a local scale [17, 16].