Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Double barrier long Josephson junctions with a contact to the intermediate superconducting layer

H. Kohlstedt, Alexey Vladimirovich Ustinov, F. Peter

Published Jun 1, 1995• 5 citations
Publisher

Abstract

We demonstrate a double barrier long Josephson tunnel junction device of overlap geometry with an external electric contact to the middle electrode. The junctions were fabricated with a standard Nb/Al-AlO/sub x//Nb process. To exhibit fluxon coupling effects in stacked junctions, the intermediate Nb layer thickness between two barriers has to be of the order of the London penetration depth, i.e. 90 nm for sputtered Nb films. By using a planarization process, we were able to avoid steep steps on the wafer and so to reduce the intermediate layer thickness to 90 nm. Double-junction stacks with areas from 10/spl times/10 /spl mu/m/sup 2/ to 20/spl times/600 /spl mu/m/sup 2/ were fabricated. In the best stacks, the difference in the critical currents of two junctions was less than 3%. Clear voltage locking effects were observed in current-voltage (I-V) characteristics.>

DOI
10.1109/77.403208

Related papers

Coherent flux-flow in vertically stacked long Josephson tunnel junctions

Alexey Vladimirovich Ustinov, H. Kohlstedt, Christoph Heiden

Vertical stacks of two Nb/Al-AlO/sub x//Nb long Josephson junctions with nearly identical parameters have been studied experimentally. The magnetic coupling between the junctions was provided by their common electrode of thickness d/spl sime//spl lambda//sub L/. The I-V characteristics displayed flux-flow resonances of the two junctions. Two different mutually phase-locked regimes were found: the lower velocity anti-phase mode, and the high velocity in-phase mode. These modes, while staying locked, could be tuned by the magnetic field in a broad voltage range which corresponds to the Josephson frequencies of 150-600 GHz for the lower mode and 280-400 GHz for the upper mode. Our observations suggest applications of the stacked long Josephson junctions as local oscillators for millimeter and sub-millimeter wave circuits.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•10 citations

Overdamped NbN Josephson Junctions Based on Nb/AlOx/Nb Trilayer Technology

Takao Iwai, Takashi Aoyama, Ryutaro Oke +3 more

We have fabricated overdamped NbN Josephson junctions based on Nb/AlO x /Nb trilayer technology. The junctions have the structure of NbN/Nb/AlO x /Nb/NbN, where Nb/AlO x /Nb acts as a junction barrier. The overdamped junctions showed a critical current density J c and characteristic voltage as high as 0.44 kA/cm2 and 160 µV at 10 K, respectively. The junction characteristics at 4.2 K were investigated from the viewpoint of their dependence on the film thickness of the Nb layers. The junction uniformity was also evaluated. The standard deviation, 1-σ, was 2.1% for a series of 64 5×5 µm2 junctions at 4.2 K.

Japanese Journal of Applied Physics•Aug 1, 1999•5 citations

Investigation of dc Josephson current distribution in double-barrier three-terminal devices with a thin middle superconducting layer

Ivan P. Nevirkovets, T. Doderer, A. Laub +2 more

Nb/Al–AlOx–Nb/Al–AlOx–Nb double-barrier three-terminal Josephson devices with a thin middle Nb/Al bilayer, which have potential for use as switching and amplifying elements in superconducting electronics, have been investigated in the stationary state by means of low-temperature scanning electron microscopy. For the devices with lateral sizes comparable with the effective Josephson penetration depth, we observed nearly homogeneous current distribution over the region common to the top and bottom junctions when the devices were biased across both the barriers in the absence of an external magnetic field. When the two junctions are biased separately, the current is concentrated at the junction edges in accordance with the behavior characteristic of distributed junctions. In an applied magnetic field, the vortex structure is confined to the area shared by both junctions when the device is biased as a whole. The experiment gives an indication that in the stationary state the spatial phase difference distribution of the two junctions coincides in the shared region at least in some interval of the external magnetic field.

Journal of Applied Physics•Aug 15, 1996•5 citations

Fabrication and characterization of high-quality Nb/Al-AlO x /Nb cross-type Josephson tunnel junctions utilising CMP-based planarisation techniques

Alexander Stoll, Andreas Reifenberger, Daniel Hengstler +2 more

Abstract Josephson tunnel junctions (JJs) are the fundamental building blocks of today's most advanced superconducting electronic components, such as qubits and superconducting quantum interference devices (SQUIDs). Given the ongoing demand for scalability of these devices on the wafer-scale, it is crucial to control the fabrication process as precisely as possible to ensure uniform quality and reproducibility. Today, window-type JJs are often used in the production of DC SQUIDs and while they are reliable and reproducible, they suffer from alignment inaccuracies caused by photolithography and unavoidable parasitic capacitances, thus limiting the energy sensitivity of DC SQUIDs. These problems can be circumvented by producing JJs with cross-type geometry, which allows for smaller junction areas and eliminates parasitic capacitances. Here we discuss the fabrication of Nb/Al-AlO x /Nb-based cross-type JJs, where the trilayer is embedded in sputter-deposited SiO 2 to allow for planarisation of structures and to ensure reliable insulation of the sidewalls of the bottom electrode. Instead of lift-off processes that can require processing times of several hours and potentially produce residual dielectric features along the structure edges that might compromise subsequent layers, we use chemical-mechanical polishing (CMP) for the removal of excess SiO 2 . This reduces the duration of the planarization step from hours to minutes and yields smooth, uniform surfaces with a within-wafer non-uniformity of below 5%. The resulting process achieves a junction yield above 90% across 3 inch wafers. In addition, we discuss the influence of fabrication details on the quality and electrical properties of our JJs with different junction areas down to 1 µm × 1 µm distributed across the wafer and extract the junction specific quality parameters from their IV -characteristics. Across the junctions, the spreads are approximately 1% for gap voltage, below 3% for critical current, below 4% for the subgap-to-normal resistance ratio, and below 1% for characteristic voltage.

arXiv:2609.08569•Superconductor Science and Technology•Nov 10, 2026•0 citations

Fabrication and characterization of NbN/(TaN/NbN) N stacked Josephson junctions

Lu Zhang, Yuanhe Tao, Yulong Zhong +8 more

Abstract In this work, we present a detailed study of the electrical properties of stacked NbN/(TaN/NbN) N Josephson junctions. Cross-sectional scanning transmission electron microscopy analysis of the 5-stacked junction shows that the multilayer interface is very flat, each barrier has the same thickness, and the sidewalls of the junctions are nearly perpendicular to the substrate. Stacked junctions of different sizes and stacking numbers all have only one transition in their current–voltage curves. This indicates that the critical currents of the junctions in the stacked junctions are almost the same, showing the stability and repeatability of the multilayer fabrication and etching process. At 4.2 K, the 4-stacked junction shows excellent Josephson properties with characteristic voltage V c of 3.54 mV, which is about four times the 0.88 mV of the single junction. The temperature dependence of critical current density J c and V c of the stacked junction with N = 1, 2, 4 were measured, all of which can be fitted with dirty-limit theory. Stacked junctions with larger V c or more stacked layers can be achieved by optimizing electrode and barrier thickness, barrier resistivity, and thermal relaxation rate, etc.

Superconductor Science and Technology•Nov 2, 2022•5 citations

Nb/AlOx/Nb Josephson Tunnel Junctions Using Electron Beam Evaporation

Atsuki Inoue, Akiyoshi Nakayama, Yoichi Okabe

Niobium/aluminum-oxide/niobium Josephson tunnel junctions have been fabricated using electron beam evaporation to form all-metal films in a high vacuum system. A quality factor, V m (the product of the maximum dc Josephson current and the subgap resistance defined at 2 mV) between 36–37 mV, has been obtained for the best junctions of a 6 nm-thick Al layer by cooling down the surface of the base electrode for 100 minutes under a high background pressure, before the deposition of aluminum, after the formation of the base niobium electrode. An array of 80 series-connected junctions has also been fabricated using the selective niobium anodization process and the planarization process. The current-voltage characteristics of the array showed a standard deviation of the maximum dc Josephson current of 3.3%.

Japanese Journal of Applied Physics•Jul 1, 1988•10 citations
We demonstrate a double barrier long Josephson tunnel junction device of overlap geometry with an external electric contact to the middle electrode. The junctions were fabricated with a standard Nb/Al-AlO/sub x//Nb process. To exhibit fluxon coupling effects in stacked junctions, the intermediate Nb layer thickness between two barriers has to be of the order of the London penetration depth, i.e. 90 nm for sputtered Nb films. By using a planarization process, we were able to avoid steep steps on the wafer and so to reduce the intermediate layer thickness to 90 nm. Double-junction stacks with areas from 10/spl times/10 /spl mu/m/sup 2/ to 20/spl times/600 /spl mu/m/sup 2/ were fabricated. In the best stacks, the difference in the critical currents of two junctions was less than 3%. Clear voltage locking effects were observed in current-voltage (I-V) characteristics.>
Vertical stacks of two Nb/Al-AlO/sub x//Nb long Josephson junctions with nearly identical parameters have been studied experimentally. The magnetic coupling between the junctions was provided by their common electrode of thickness d/spl sime//spl lambda//sub L/. The I-V characteristics displayed flux-flow resonances of the two junctions. Two different mutually phase-locked regimes were found: the lower velocity anti-phase mode, and the high velocity in-phase mode. These modes, while staying locked, could be tuned by the magnetic field in a broad voltage range which corresponds to the Josephson frequencies of 150-600 GHz for the lower mode and 280-400 GHz for the upper mode. Our observations suggest applications of the stacked long Josephson junctions as local oscillators for millimeter and sub-millimeter wave circuits.>
We have fabricated overdamped NbN Josephson junctions based on Nb/AlO x /Nb trilayer technology. The junctions have the structure of NbN/Nb/AlO x /Nb/NbN, where Nb/AlO x /Nb acts as a junction barrier. The overdamped junctions showed a critical current density J c and characteristic voltage as high as 0.44 kA/cm2 and 160 µV at 10 K, respectively. The junction characteristics at 4.2 K were investigated from the viewpoint of their dependence on the film thickness of the Nb layers. The junction uniformity was also evaluated. The standard deviation, 1-σ, was 2.1% for a series of 64 5×5 µm2 junctions at 4.2 K.
Nb/Al–AlOx–Nb/Al–AlOx–Nb double-barrier three-terminal Josephson devices with a thin middle Nb/Al bilayer, which have potential for use as switching and amplifying elements in superconducting electronics, have been investigated in the stationary state by means of low-temperature scanning electron microscopy. For the devices with lateral sizes comparable with the effective Josephson penetration depth, we observed nearly homogeneous current distribution over the region common to the top and bottom junctions when the devices were biased across both the barriers in the absence of an external magnetic field. When the two junctions are biased separately, the current is concentrated at the junction edges in accordance with the behavior characteristic of distributed junctions. In an applied magnetic field, the vortex structure is confined to the area shared by both junctions when the device is biased as a whole. The experiment gives an indication that in the stationary state the spatial phase difference distribution of the two junctions coincides in the shared region at least in some interval of the external magnetic field.
Abstract Josephson tunnel junctions (JJs) are the fundamental building blocks of today's most advanced superconducting electronic components, such as qubits and superconducting quantum interference devices (SQUIDs). Given the ongoing demand for scalability of these devices on the wafer-scale, it is crucial to control the fabrication process as precisely as possible to ensure uniform quality and reproducibility. Today, window-type JJs are often used in the production of DC SQUIDs and while they are reliable and reproducible, they suffer from alignment inaccuracies caused by photolithography and unavoidable parasitic capacitances, thus limiting the energy sensitivity of DC SQUIDs. These problems can be circumvented by producing JJs with cross-type geometry, which allows for smaller junction areas and eliminates parasitic capacitances. Here we discuss the fabrication of Nb/Al-AlO x /Nb-based cross-type JJs, where the trilayer is embedded in sputter-deposited SiO 2 to allow for planarisation of structures and to ensure reliable insulation of the sidewalls of the bottom electrode. Instead of lift-off processes that can require processing times of several hours and potentially produce residual dielectric features along the structure edges that might compromise subsequent layers, we use chemical-mechanical polishing (CMP) for the removal of excess SiO 2 . This reduces the duration of the planarization step from hours to minutes and yields smooth, uniform surfaces with a within-wafer non-uniformity of below 5%. The resulting process achieves a junction yield above 90% across 3 inch wafers. In addition, we discuss the influence of fabrication details on the quality and electrical properties of our JJs with different junction areas down to 1 µm × 1 µm distributed across the wafer and extract the junction specific quality parameters from their IV -characteristics. Across the junctions, the spreads are approximately 1% for gap voltage, below 3% for critical current, below 4% for the subgap-to-normal resistance ratio, and below 1% for characteristic voltage.
Abstract In this work, we present a detailed study of the electrical properties of stacked NbN/(TaN/NbN) N Josephson junctions. Cross-sectional scanning transmission electron microscopy analysis of the 5-stacked junction shows that the multilayer interface is very flat, each barrier has the same thickness, and the sidewalls of the junctions are nearly perpendicular to the substrate. Stacked junctions of different sizes and stacking numbers all have only one transition in their current–voltage curves. This indicates that the critical currents of the junctions in the stacked junctions are almost the same, showing the stability and repeatability of the multilayer fabrication and etching process. At 4.2 K, the 4-stacked junction shows excellent Josephson properties with characteristic voltage V c of 3.54 mV, which is about four times the 0.88 mV of the single junction. The temperature dependence of critical current density J c and V c of the stacked junction with N = 1, 2, 4 were measured, all of which can be fitted with dirty-limit theory. Stacked junctions with larger V c or more stacked layers can be achieved by optimizing electrode and barrier thickness, barrier resistivity, and thermal relaxation rate, etc.
Niobium/aluminum-oxide/niobium Josephson tunnel junctions have been fabricated using electron beam evaporation to form all-metal films in a high vacuum system. A quality factor, V m (the product of the maximum dc Josephson current and the subgap resistance defined at 2 mV) between 36–37 mV, has been obtained for the best junctions of a 6 nm-thick Al layer by cooling down the surface of the base electrode for 100 minutes under a high background pressure, before the deposition of aluminum, after the formation of the base niobium electrode. An array of 80 series-connected junctions has also been fabricated using the selective niobium anodization process and the planarization process. The current-voltage characteristics of the array showed a standard deviation of the maximum dc Josephson current of 3.3%.