Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Fabrication and characterization of NbN/(TaN/NbN) N stacked Josephson junctions

Lu Zhang, Yuanhe Tao, Yulong Zhong, Kaixin Yan, Junwen Zeng, Weifeng Shi, Ling Wu, Huiwu Wang, Lei Chen, Wei Peng, Zhen Wang

Published Nov 2, 2022• 5 citations
Publisher

Abstract

Abstract In this work, we present a detailed study of the electrical properties of stacked NbN/(TaN/NbN) N Josephson junctions. Cross-sectional scanning transmission electron microscopy analysis of the 5-stacked junction shows that the multilayer interface is very flat, each barrier has the same thickness, and the sidewalls of the junctions are nearly perpendicular to the substrate. Stacked junctions of different sizes and stacking numbers all have only one transition in their current–voltage curves. This indicates that the critical currents of the junctions in the stacked junctions are almost the same, showing the stability and repeatability of the multilayer fabrication and etching process. At 4.2 K, the 4-stacked junction shows excellent Josephson properties with characteristic voltage V c of 3.54 mV, which is about four times the 0.88 mV of the single junction. The temperature dependence of critical current density J c and V c of the stacked junction with N = 1, 2, 4 were measured, all of which can be fitted with dirty-limit theory. Stacked junctions with larger V c or more stacked layers can be achieved by optimizing electrode and barrier thickness, barrier resistivity, and thermal relaxation rate, etc.

DOI
10.1088/1361-6668/ac9f83

Related papers

Electrical properties of NbN/NbN x /NbN Josephson junctions

Lu Zhang, Kaixin Yan, Yuanhe Tao +9 more

Abstract In this work, we report the electrical properties of NbN internally shunted Josephson junctions with NbN x barriers. Cross-sectional scanning transmission electron microscopy analysis shows that all layers have the same cubic structure; NbN/NbN x /NbN trilayers were epitaxially grown on MgO substrates. The resistivity of the NbN x films could be varied in the range of 1–104 mΩ cm by controlling both the N2 partial pressure and the deposition time during reactive sputtering. The temperature dependence of the critical current density (J c) and characteristic voltage (I c R n) of the junctions with different barrier resistivities were measured for various barrier thicknesses. For the 10 nm-thick NbN x layer with resistivities of 73.44, 385.72, and 711 mΩ cm, the coherence length of the barrier was determined to be 5.55 ± 0.07, 4.88 ± 0.06, and 1.40 ± 0.13 nm, respectively, corresponding to carrier diffusion rates of 2.741 ± 0.004, 1.211 ± 0.002, and 0.008 ± 0.001 cm2 s−1, respectively. Thus, the reduction in barrier resistivity leads to a larger coherence length and a faster diffusion rate, which will further increase the J c and I c R n of the junction. By adjusting the barrier resistivity and thickness, the J c of the junction can be easily tuned over more than four orders of magnitude, and an I c R n value of 0.97 ± 0.07 mV was obtained at 10 K. The results indicate that the all-NbN self-shunt junction is a promising candidate in high-speed and high-temperature applications.

Superconductor Science and Technology•Oct 11, 2021•7 citations

Microwave-Induced Characteristics of ${({\rm NbN/TiN}_{\rm x})}_{N}/{\rm NbN}$ StackedJosephson Junction Arrays

Nobuko Koda, Alexandre Shoji, Hirotake Yamamori +1 more

Stacked (NbN/TiNx)N/NbN (N = 2, 3, 4, 5 and 10) Josephson junctions and their arrays have been fabricated on a Si chip and their microwave-induced characteristics were measured at a temperature around 10 K. To achieve a vertical and smooth edge of an NbN - TiNxmultilayer, an inductively coupled plasma reactive ion etching (ICP-RIE) technique was used. Current-voltage characteristics measured for stacks of (NbN/TiNx)N/NbN Josephson junctions without microwave indicated that critical currents for those junctions distribute in a certain range. We defined Ic- spread as (IcMAX- IcMIN)/IcAverage to measure the distribution of Ic. The Ic- spread was minimized when the thickness of intermediate electrodes was d = 50 nm. We also evaluated values of Ic- spread for stacks prepared at different fabrication runs as a function of the number of junctions in a stack N. As a result, we found N = 3 is the maximum for practical use. For arrays, we obtained a constant-voltage step height of about 2 m A for 2 048 stacks of double-barrier junctions (N = 2), and about 1 mA for 1 024 stacks of triple-barrier junctions (N = 3).

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•2 citations

Self-Shunted NbN Junctions With ${\rm NbN}_{x}/{\rm AlN}$ Bilayered Barriers for 4 K Operation

R. Kanada, Y. Nagai, Hiroyuki Akaike +1 more

We report the fabrication and electrical characteristics of self-shunted Josephson junctions consisting of NbN electrodes, an AlN barrier, and an NbNx normal layer for an SFQ circuit application. To fabricate such junctions with a high characteristic voltage V c, we have studied their preparation conditions including the surface treatments of MgO substrates. Junction characteristics at 4 K were dependent on the electrical properties and film thickness of the NbNx layer; the underdamped junctions changed into overdamped ones with an increase in the film thickness. The overdamped junctions showed a characteristic voltage Vc of 0.8 mV and a critical current density Jc of 22 A/cm2 at 4.2 K.

IEEE Transactions on Applied Superconductivity•May 27, 2009•5 citations

NbN Josephson Junctions for Single-Flux-Quantum Circuits

Hiroyuki Akaike, Naoto Naito, Yuki NAGAI +1 more

We describe the fabrication processes and electrical characteristics of two types of NbN junctions. One is a self-shunted NbN/NbNx/AlN/NbN Josephson junction, which is expected to improve the density of integrated circuits; the other is an underdamped NbN/AlNx/NbN tunnel junction with radical-nitride AlNx barriers, which has highly controllable junction characteristics. In the former, the junction characteristics were changed from underdamped to overdamped by varying the thickness of the NbNx layer. Overdamped junctions with a 6-nm-thick NbNx film exhibited a characteristic voltage of Vc =0.8mV and a critical current density of Jc =22A/cm2 at 4.2K. In the junctions with radical-nitride AlNx barriers, Jc could be controlled in the range 0.01-3kA/cm2 by varying the process conditions, and good uniformity of the junction characteristics was obtained.

IEICE Transactions on Electronics•Jan 1, 2011•0 citations

Properties of stacked NbN tunnel junctions

H.J. Hedbabny, Horst Rogalla

Stacks of up to three tunnel junctions were fabricated using the NbN-MgO technique. Different preparation methods were tested, and two gave favorable results. In the first one, the whole stack is prepared in situ and structured afterwards by lift-off and reactive and argon ion etching. The authors investigated the resulting I-V (current-voltage) characteristics of stacks of 8.3 mV. Since it was not possible to establish electrical connections to the intermediate electrodes by this method, a second one was applied in which each NbN/MgO layer is prepared in a separate step and structured by lift-off. Here the I-V characteristics, the interaction between the tunnel junctions, and their RF properties were investigated. Shapiro steps and photon-assisted tunneling were observed in the I-V characteristics of a receiver junction, while the bottom tunnel junctions were used as microwave generators.>

IEEE Transactions on Magnetics•Mar 1, 1989•6 citations

Single-flux-quantum circuits utilizing self-shunted NbN/TaN/NbN Josephson junctions grown on silicon substrates

Yulong Zhong, Lu Zhang, Junjie Xie +9 more

Abstract We report on the electrical properties of NbN/TaN/NbN Josephson junctions grown on thermally oxidized silicon substrates, along with the design and fabrication of superconducting single-flux-quantum (SFQ) circuits based on these NbN superconductor/normal metal/superconductor (SNS) junctions. The critical current density ( J c ) of the junctions was found to be relatively sensitive to the barrier thickness, decreasing from 108.0 ± 8.1 kA cm −2 for a 15 nm barrier to 12.8 ± 1.9 kA cm −2 for a 30 nm barrier. For a J c of approximately 24.5 ± 2.1 kA cm −2 and a barrier thickness of 25 nm, the NbN SNS junctions are self-shunted and exhibit nonhysteretic current–voltage ( I – V ) characteristics. Especially for junctions with diameter ( φ ) ranging from 0.8 to 1.6 μ m, their critical current ( I c ) falls within the range of 110–450 μ A, making them suitable for SFQ circuits. By considering the impact of excess current and incorporating it as an additional term in the conventional resistively and capacitively shunted junction model, the I – V curves of NbN SNS junctions can be precisely described, successfully minimizing the deviation between simulations and test results. The DC-SFQ and SFQ-DC interface circuits can both operate normally, and the bias margins of cell circuits such as Josephson transmission line, confluence buffer, D flip-flop, and splitter are greater than 40%. Compared to Nb superconductor/insulator/superconductor junctions, their self-shunting characteristics and relatively thick 25 nm barriers can also enhance the integration of circuits and increase the yield to complex circuits.

Superconductor Science and Technology•Oct 6, 2024•7 citations
Abstract In this work, we present a detailed study of the electrical properties of stacked NbN/(TaN/NbN) N Josephson junctions. Cross-sectional scanning transmission electron microscopy analysis of the 5-stacked junction shows that the multilayer interface is very flat, each barrier has the same thickness, and the sidewalls of the junctions are nearly perpendicular to the substrate. Stacked junctions of different sizes and stacking numbers all have only one transition in their current–voltage curves. This indicates that the critical currents of the junctions in the stacked junctions are almost the same, showing the stability and repeatability of the multilayer fabrication and etching process. At 4.2 K, the 4-stacked junction shows excellent Josephson properties with characteristic voltage V c of 3.54 mV, which is about four times the 0.88 mV of the single junction. The temperature dependence of critical current density J c and V c of the stacked junction with N = 1, 2, 4 were measured, all of which can be fitted with dirty-limit theory. Stacked junctions with larger V c or more stacked layers can be achieved by optimizing electrode and barrier thickness, barrier resistivity, and thermal relaxation rate, etc.
Abstract In this work, we report the electrical properties of NbN internally shunted Josephson junctions with NbN x barriers. Cross-sectional scanning transmission electron microscopy analysis shows that all layers have the same cubic structure; NbN/NbN x /NbN trilayers were epitaxially grown on MgO substrates. The resistivity of the NbN x films could be varied in the range of 1–104 mΩ cm by controlling both the N2 partial pressure and the deposition time during reactive sputtering. The temperature dependence of the critical current density (J c) and characteristic voltage (I c R n) of the junctions with different barrier resistivities were measured for various barrier thicknesses. For the 10 nm-thick NbN x layer with resistivities of 73.44, 385.72, and 711 mΩ cm, the coherence length of the barrier was determined to be 5.55 ± 0.07, 4.88 ± 0.06, and 1.40 ± 0.13 nm, respectively, corresponding to carrier diffusion rates of 2.741 ± 0.004, 1.211 ± 0.002, and 0.008 ± 0.001 cm2 s−1, respectively. Thus, the reduction in barrier resistivity leads to a larger coherence length and a faster diffusion rate, which will further increase the J c and I c R n of the junction. By adjusting the barrier resistivity and thickness, the J c of the junction can be easily tuned over more than four orders of magnitude, and an I c R n value of 0.97 ± 0.07 mV was obtained at 10 K. The results indicate that the all-NbN self-shunt junction is a promising candidate in high-speed and high-temperature applications.
Microwave-Induced Characteristics of (NbN/TiNx)N/NbN{({\rm NbN/TiN}_{\rm x})}_{N}/{\rm NbN}(NbN/TiNx​)N​/NbN StackedJosephson Junction Arrays
Stacked (NbN/TiNx)N/NbN (N = 2, 3, 4, 5 and 10) Josephson junctions and their arrays have been fabricated on a Si chip and their microwave-induced characteristics were measured at a temperature around 10 K. To achieve a vertical and smooth edge of an NbN - TiNxmultilayer, an inductively coupled plasma reactive ion etching (ICP-RIE) technique was used. Current-voltage characteristics measured for stacks of (NbN/TiNx)N/NbN Josephson junctions without microwave indicated that critical currents for those junctions distribute in a certain range. We defined Ic- spread as (IcMAX- IcMIN)/IcAverage to measure the distribution of Ic. The Ic- spread was minimized when the thickness of intermediate electrodes was d = 50 nm. We also evaluated values of Ic- spread for stacks prepared at different fabrication runs as a function of the number of junctions in a stack N. As a result, we found N = 3 is the maximum for practical use. For arrays, we obtained a constant-voltage step height of about 2 m A for 2 048 stacks of double-barrier junctions (N = 2), and about 1 mA for 1 024 stacks of triple-barrier junctions (N = 3).
Self-Shunted NbN Junctions With NbNx/AlN{\rm NbN}_{x}/{\rm AlN}NbNx​/AlN Bilayered Barriers for 4 K Operation
We report the fabrication and electrical characteristics of self-shunted Josephson junctions consisting of NbN electrodes, an AlN barrier, and an NbNx normal layer for an SFQ circuit application. To fabricate such junctions with a high characteristic voltage V c, we have studied their preparation conditions including the surface treatments of MgO substrates. Junction characteristics at 4 K were dependent on the electrical properties and film thickness of the NbNx layer; the underdamped junctions changed into overdamped ones with an increase in the film thickness. The overdamped junctions showed a characteristic voltage Vc of 0.8 mV and a critical current density Jc of 22 A/cm2 at 4.2 K.
We describe the fabrication processes and electrical characteristics of two types of NbN junctions. One is a self-shunted NbN/NbNx/AlN/NbN Josephson junction, which is expected to improve the density of integrated circuits; the other is an underdamped NbN/AlNx/NbN tunnel junction with radical-nitride AlNx barriers, which has highly controllable junction characteristics. In the former, the junction characteristics were changed from underdamped to overdamped by varying the thickness of the NbNx layer. Overdamped junctions with a 6-nm-thick NbNx film exhibited a characteristic voltage of Vc =0.8mV and a critical current density of Jc =22A/cm2 at 4.2K. In the junctions with radical-nitride AlNx barriers, Jc could be controlled in the range 0.01-3kA/cm2 by varying the process conditions, and good uniformity of the junction characteristics was obtained.
Stacks of up to three tunnel junctions were fabricated using the NbN-MgO technique. Different preparation methods were tested, and two gave favorable results. In the first one, the whole stack is prepared in situ and structured afterwards by lift-off and reactive and argon ion etching. The authors investigated the resulting I-V (current-voltage) characteristics of stacks of 8.3 mV. Since it was not possible to establish electrical connections to the intermediate electrodes by this method, a second one was applied in which each NbN/MgO layer is prepared in a separate step and structured by lift-off. Here the I-V characteristics, the interaction between the tunnel junctions, and their RF properties were investigated. Shapiro steps and photon-assisted tunneling were observed in the I-V characteristics of a receiver junction, while the bottom tunnel junctions were used as microwave generators.>
Abstract We report on the electrical properties of NbN/TaN/NbN Josephson junctions grown on thermally oxidized silicon substrates, along with the design and fabrication of superconducting single-flux-quantum (SFQ) circuits based on these NbN superconductor/normal metal/superconductor (SNS) junctions. The critical current density ( J c ) of the junctions was found to be relatively sensitive to the barrier thickness, decreasing from 108.0 ± 8.1 kA cm −2 for a 15 nm barrier to 12.8 ± 1.9 kA cm −2 for a 30 nm barrier. For a J c of approximately 24.5 ± 2.1 kA cm −2 and a barrier thickness of 25 nm, the NbN SNS junctions are self-shunted and exhibit nonhysteretic current–voltage ( I – V ) characteristics. Especially for junctions with diameter ( φ ) ranging from 0.8 to 1.6 μ m, their critical current ( I c ) falls within the range of 110–450 μ A, making them suitable for SFQ circuits. By considering the impact of excess current and incorporating it as an additional term in the conventional resistively and capacitively shunted junction model, the I – V curves of NbN SNS junctions can be precisely described, successfully minimizing the deviation between simulations and test results. The DC-SFQ and SFQ-DC interface circuits can both operate normally, and the bias margins of cell circuits such as Josephson transmission line, confluence buffer, D flip-flop, and splitter are greater than 40%. Compared to Nb superconductor/insulator/superconductor junctions, their self-shunting characteristics and relatively thick 25 nm barriers can also enhance the integration of circuits and increase the yield to complex circuits.