Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Utilizing Nonlinearity in a Superconducting NbN Stripline Resonator for Radiation Detection

Eran Segev, Baleegh Abdo, Oleg Shtempluck, Eyal Buks

Published Jun 1, 2007• 3 citations
Publisher

Abstract

We study a microwave superconducting stripline resonator made of NbN on a sapphire substrate. A radiation detector (RD) having a thin meander shape is integrated into the resonator. We harness an extremely strong nonlinear instability occurring in the device in order to enhance its sensitivity to infrared radiation impinging on the RD. Characterization measurements yield a noise equivalent power of 34 fW/radicHz at a modulation frequency of 7.74 GHz. Such a device may be exploited for fast and sensitive radiation detection.

DOI
10.1109/tasc.2007.897723

Related papers

Thermal instability and self-sustained modulation in superconducting NbN stripline resonators

Eran Segev, Baleegh Abdo, Oleg Shtempluck +1 more

We study theoretically and experimentally the response of a microwave superconducting stripline resonator, integrated with a microbridge, to a monochromatic injected signal. We find that there is a certain range of driving parameters in which a novel nonlinear phenomenon emerges, and self-sustained modulation of the reflected power off the resonator is generated by the resonator. A theoretical model which attributes the self-modulation to a thermal instability yields a good agreement with the experimental results.

arXiv:cond-mat/0607261•Journal of Physics Condensed Matter•Feb 14, 2007•15 citations

Experimental characterization of NbN nanowire optical detectors with parallel stripline configuration

A. Casaburi, Mikkel Ejrnaes, Orlando Quaranta +10 more

We have developed a novel geometrical configuration for NbN-based superconducting single photon optical detector (SSPD) that achieves two goals: a much lower intrinsic impedance, and a consequently greater bandwidth, and a much larger signal amplitude compared to the standard meandered configuration. This has been obtained by implementing a properly designed parallel stripline structure where a cascade switching mechanism occurs when one of the striplines is hit by an optical photon. The overall switching occurs synchronously and in a very short time, giving rise to a strong and fast voltage pulse. The SSPD have been realized using state of the art NbN deposition technology and e-beam lithography. The strips are 100 nm wide and 5 μm long and have been realized with 4 nm NbN film on sapphire and Si substrate. We report on experimental characterization of such novel devices. The performances of the proposed novel type of SSPD are compared with standard SSPD design and results in terms of signal amplitude, risetime and effective detection area.

Journal of Physics Conference Series•Feb 1, 2008•1 citation

Superconducting noise bolometer for terahertz radiation

A. D. Semenov, Heiko Richter, Heinz‐Wilhelm Hübers +2 more

We present a superconducting noise bolometer that is a bolometric detector sensing radiation via radiation-induced changes of its own microwave noise. The detector represents a nanostrip made from a thin NbN superconducting film. It operates in the superconducting state and carries a supercurrent slightly less than the critical current. Radiation couples with the detector via an immersion lens and a planar antenna, which jointly define the useful spectral range from 1to5THz. At an ambient temperature of 4.2K, the optically measured noise-equivalent power amounts at ≈10−13WHz−1∕2 along with a time constant of approximately 150ps.

Applied Physics Letters•Oct 18, 2005•6 citations

Advanced superconducting optical detectors

David Pérez de Lara, Mikkel Ejrnaes, S. Pagano +4 more

We have investigated advanced superconducting optical and infrared detectors for their integration with superconductive active circuits. The detectors are based on ultra-thin NbN striplines. NbN is the material of choice for single photon optical and infrared detectors, as already demonstrated in the literature. The detectors so far proposed are based on conceptually simple, although difficult to realize, sub-micrometric meander type structures. Most applications of such detectors require some treatment of the signal generated, either as pulse shaping or signal amplification, to fully exploit the detection capabilities, such as sub-ns response time and proportional response. We have developed a room temperature process that, while preserving reasonable superconducting properties of NbN, allows a simple integration of the detectors in Nb-based circuits. Moreover we have developed a passivation technique, by using a protective AlN layer on top of the NbN one. The developed technology allows complex detector configurations, such as integrated RSFQ circuits or SQUID readout, to be relatively easily realized. The response of our NbN strip to photon irradiation will be presented.

Journal of Physics Conference Series•Jun 1, 2006•0 citations

Operation of a titanium nitride superconducting microresonator detector in the nonlinear regime

Loren J. Swenson, Peter K. Day, Byeong Ho Eom +5 more

If driven sufficiently strongly, superconducting microresonators exhibit nonlinear behavior including response bifurcation. This behavior can arise from a variety of physical mechanisms including heating effects, grain boundaries or weak links, vortex penetration, or through the intrinsic nonlinearity of the kinetic inductance. Although microresonators used for photon detection are usually driven fairly hard in order to optimize their sensitivity, most experiments to date have not explored detector performance beyond the onset of bifurcation. Here, we present measurements of a lumped-element superconducting microresonator designed for use as a far-infrared detector and operated deep into the nonlinear regime. The 1 GHz resonator was fabricated from a 22 nm thick titanium nitride film with a critical temperature of 2 K and a normal-state resistivity of 100 μΩ cm. We measured the response of the device when illuminated with 6.4 pW optical loading using microwave readout powers that ranged from the low-power, linear regime to 18 dB beyond the onset of bifurcation. Over this entire range, the nonlinear behavior is well described by a nonlinear kinetic inductance. The best noise-equivalent power of 2×10−16 W/Hz1/2 at 10 Hz was measured at the highest readout power, and represents a ∼10 fold improvement compared with operating below the onset of bifurcation.

arXiv:1305.4281•Journal of Applied Physics•Mar 8, 2013•123 citations

Fast Resonance Frequency Optical Modulation in Superconducting Stripline Resonator

Eran Segev, Baleegh Abdo, Oleg Shtempluck +1 more

Fast resonance frequency optical modulation of a superconducting stripline resonator is investigated. The experiments are performed using a novel device which integrates a hot electron detector (HED) into a superconducting stripline ring resonator. Frequency modulation is demonstrated by both applying dc current or voltage to the HED, and by applying optical illumination, with modulation frequencies of up to 4.2 GHz. Potential applications for such a device are in telecommunication, quantum cryptography, and biofluorescence

IEEE Transactions on Applied Superconductivity•Sep 1, 2006•12 citations
We study a microwave superconducting stripline resonator made of NbN on a sapphire substrate. A radiation detector (RD) having a thin meander shape is integrated into the resonator. We harness an extremely strong nonlinear instability occurring in the device in order to enhance its sensitivity to infrared radiation impinging on the RD. Characterization measurements yield a noise equivalent power of 34 fW/radicHz at a modulation frequency of 7.74 GHz. Such a device may be exploited for fast and sensitive radiation detection.
We study theoretically and experimentally the response of a microwave superconducting stripline resonator, integrated with a microbridge, to a monochromatic injected signal. We find that there is a certain range of driving parameters in which a novel nonlinear phenomenon emerges, and self-sustained modulation of the reflected power off the resonator is generated by the resonator. A theoretical model which attributes the self-modulation to a thermal instability yields a good agreement with the experimental results.
We have developed a novel geometrical configuration for NbN-based superconducting single photon optical detector (SSPD) that achieves two goals: a much lower intrinsic impedance, and a consequently greater bandwidth, and a much larger signal amplitude compared to the standard meandered configuration. This has been obtained by implementing a properly designed parallel stripline structure where a cascade switching mechanism occurs when one of the striplines is hit by an optical photon. The overall switching occurs synchronously and in a very short time, giving rise to a strong and fast voltage pulse. The SSPD have been realized using state of the art NbN deposition technology and e-beam lithography. The strips are 100 nm wide and 5 μm long and have been realized with 4 nm NbN film on sapphire and Si substrate. We report on experimental characterization of such novel devices. The performances of the proposed novel type of SSPD are compared with standard SSPD design and results in terms of signal amplitude, risetime and effective detection area.
We present a superconducting noise bolometer that is a bolometric detector sensing radiation via radiation-induced changes of its own microwave noise. The detector represents a nanostrip made from a thin NbN superconducting film. It operates in the superconducting state and carries a supercurrent slightly less than the critical current. Radiation couples with the detector via an immersion lens and a planar antenna, which jointly define the useful spectral range from 1to5THz. At an ambient temperature of 4.2K, the optically measured noise-equivalent power amounts at ≈10−13WHz−1∕2 along with a time constant of approximately 150ps.
We have investigated advanced superconducting optical and infrared detectors for their integration with superconductive active circuits. The detectors are based on ultra-thin NbN striplines. NbN is the material of choice for single photon optical and infrared detectors, as already demonstrated in the literature. The detectors so far proposed are based on conceptually simple, although difficult to realize, sub-micrometric meander type structures. Most applications of such detectors require some treatment of the signal generated, either as pulse shaping or signal amplification, to fully exploit the detection capabilities, such as sub-ns response time and proportional response. We have developed a room temperature process that, while preserving reasonable superconducting properties of NbN, allows a simple integration of the detectors in Nb-based circuits. Moreover we have developed a passivation technique, by using a protective AlN layer on top of the NbN one. The developed technology allows complex detector configurations, such as integrated RSFQ circuits or SQUID readout, to be relatively easily realized. The response of our NbN strip to photon irradiation will be presented.
If driven sufficiently strongly, superconducting microresonators exhibit nonlinear behavior including response bifurcation. This behavior can arise from a variety of physical mechanisms including heating effects, grain boundaries or weak links, vortex penetration, or through the intrinsic nonlinearity of the kinetic inductance. Although microresonators used for photon detection are usually driven fairly hard in order to optimize their sensitivity, most experiments to date have not explored detector performance beyond the onset of bifurcation. Here, we present measurements of a lumped-element superconducting microresonator designed for use as a far-infrared detector and operated deep into the nonlinear regime. The 1 GHz resonator was fabricated from a 22 nm thick titanium nitride film with a critical temperature of 2 K and a normal-state resistivity of 100 μΩ cm. We measured the response of the device when illuminated with 6.4 pW optical loading using microwave readout powers that ranged from the low-power, linear regime to 18 dB beyond the onset of bifurcation. Over this entire range, the nonlinear behavior is well described by a nonlinear kinetic inductance. The best noise-equivalent power of 2×10−16 W/Hz1/2 at 10 Hz was measured at the highest readout power, and represents a ∼10 fold improvement compared with operating below the onset of bifurcation.
Fast resonance frequency optical modulation of a superconducting stripline resonator is investigated. The experiments are performed using a novel device which integrates a hot electron detector (HED) into a superconducting stripline ring resonator. Frequency modulation is demonstrated by both applying dc current or voltage to the HED, and by applying optical illumination, with modulation frequencies of up to 4.2 GHz. Potential applications for such a device are in telecommunication, quantum cryptography, and biofluorescence