Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Metrological Study of YBCO Josephson Junction Arrays Integrated in a Fabry-Perot Resonator

A. Sosso, Domenico Andreone, V. Lacquaniti, Alexander M. Klushin, M. He, N. Klein

Published Jun 1, 2007• 9 citations
Publisher

Abstract

The application of high temperature superconductor Josephson junctions to voltage metrology is promising for many reasons, beyond the evident advantage of simplified cryogenics and reduced costs of the apparatus. Owing to their intrinsic non-hysteretic behavior, arrays of shunted bicrystal YBCO junctions are particularly interesting for the realization of an AC voltage standard with quantum accuracy. Moreover, shunted bicrystal YBCO junctions arrays are advantageous because of the reduced area of the junctions, the wide range of characteristic voltages, and large critical currents. However, some specific problems arise, like possible effects related to the higher operating temperature. Furthermore, fabrication technology sets tight constraints on the design of structures for the distribution of microwave currents along the array junctions. We investigated the step properties under millimeter wave irradiation at frequencies about 75 GHz of HTS junction and arrays prepared on bicrystal substrates having grain boundaries. High sensitivity techniques were adopted to evaluate the step flatness at nV level and assess the accuracy of the step voltage. A new method that makes use of an open resonator, was implemented to irradiate the array, providing synchronization of a large number of junctions.

DOI
10.1109/tasc.2007.898581

Related papers

Optimization of the coupling of mm wave power to arrays of high-TcJosephson junctions

Alexander M. Klushin, M He, M. Levitchev +2 more

We explored high-temperature superconductor Josephson junction arrays embedded in a hemispherical Fabry-Perot resonator. We compared the characteristics of three designs of arrays to achieve steps at higher voltage with a better coupling to the millimeter wave irradiation power. With an optimal design, we achieved a maximum Josephson voltage of about 0.1V for an array of 620 bicrystal junctions at a temperature of 79.2K and a frequency of 77.465 GHz. Also steps from 0.01 V up to 0.1 V were observed. Our results showed that such circuits are challenging for applications in quantum voltage metrology. It is important to note that our quasioptical coupling method can be extended up to terahertz frequencies.

Journal of Physics Conference Series•Feb 1, 2008•8 citations

Quantum Voltage Characteristics of High-Temperature Superconducting Josephson Junction Arrays with Varied Junction Widths

Da Xu, Yafang Lian, Changhao Zhao +3 more

High-temperature superconducting (HTS) Josephson junction (JJ) arrays with varied junction widths of 2-5 μm were fabricated on REBCO/Au-coated (La,Sr)(Al,Ta)O3 (LSAT) bicrystal substrates for quantum voltage standard applications. The HTS JJ arrays, consisting of five Josephson junctions connected in series, were irradiated via a Fabry-Pérot resonator. The HTS JJ series array with a 5 μm junction width exhibits the best overall performance. Under 66.72 GHz microwave irradiation at 77 K, the 5 μm-wide junction array exhibits a second-order quantum voltage of 1.3794 mV with a step width of 250 μA and voltage fluctuation of within 0.1 μV. At a lower temperature of 58.66 K and 69.516 GHz microwave irradiation, the same device produced a stable quantum voltage of 8.0494 mV, corresponding to the 11th to 12th order steps, with a step width of 100 μA and voltage fluctuation also confined to 0.1 μV.

Conference on Precision Electromagnetic Measurements•Sep 1, 2026•0 citations

Bicrystal Josephson junctions and arrays in a Fabry-Perot resonator

Alexander M. Klushin, D. M. Druzhnov, N. Klein

Full frequency locking of an array of 121 Josephson junctions was demonstrated upon millimeter wave irradiation employing a Fabry-Perot resonator at 73 GHz. This result indicates that such arrays exhibit promising properties to be utilized in quantum voltage metrology. On the other hand, the combination of such arrays with THz-Fabry Perot resonators is very challenging for developing Josephson array radiation sources for the THz frequency band.

Journal of Physics Conference Series•Jun 1, 2006•6 citations

A method for self-radiation of Josephson junction arrays

Zh Wang, Xinjie Zhao, H W Yue +6 more

We proposed a novel approach to self-radiation of Josephson junction arrays. Bicrystal Josephson junction arrays fabricated on a bicrystal substrate were integrated with a half-wavelength dipole array and embedded in a Fabry–Perot resonator. Considered as a dielectric resonator, the substrate could be stimulated to resonate in an appropriate mode at the same frequency as the Fabry–Perot resonator, which realized a coupling between Josephson junctions as well as a coupling between the junctions and microwave structures by means of a resonant interaction between junctions and resonators. Both simulations and experiments were performed. A YBCO bicrystal Josephson junction array with 166 junctions was measured at liquid nitrogen temperature. The maximal self-radiation power of 10 pW was detected at 75.2 GHz, which was in agreement with the simulation results.

Superconductor Science and Technology•May 4, 2010•12 citations

Noise Analysis for Millimeter-Wave Driving of High-Temperature Superconductor Josephson Junction Arrays

Changhao Zhao, Yafang Lian, Da Xu +6 more

High-temperature superconductor Josephson junction arrays were irradiated with millimeter-wave of approximately 70 GHz. The junction arrays were composed of 15 bicrystal YBCO junctions in series and produced DC voltage output of up to 2 mV, which was sampled by a commercial nanovoltmeter. The measured Vppof voltage fluctuations was on the order of 0.6 μV, exceeding the intrinsic fluctuation of the nanovoltmeter itself. To identify the origin of the excessive fluctuations, the phase noise and harmonic distortion of the millimeter-wave signal were analyzed and finally excluded from the major cause of the performance degradation. While millimeter-wave filtering and DC wiring of the apparatus can be improved, the results showed the feasibility of the millimeter-wave driving architecture and the noise analysis framework can be applied to development of even higher frequency drives into THz range.

Conference on Precision Electromagnetic Measurements•Sep 1, 2026•0 citations

Millimeter Wave Mixing Properties of EuBa 2Cu 3O 7-δ Bicrystal Grain Boundary Junction Arrays

Koji Tsuru, Kazunori Miyahara, Minoru Suzuki

We report the millimeter wave mixing properties of high-T c superconductor Josephson junction arrays using a waveguide-to-microstrip converter in the 100 GHz frequency range. The junction arrays consist of 3 weak links fabricated from EuBa2Cu3O7-δ thin films grown on an MgO bicrystal substrate. In these junction arrays, Shapiro steps are observed in the presence of 100 GHz irradiation at intervals of 3 times the fundamental step voltage. Millimeter wave mixing with an input local oscillator frequency of 99.142 GHz and an input signal frequency of 99.880 GHz is detected as the IF output at 738 MHz. The IF output power peaks at voltages corresponding to those of the dynamic resistance dV/ dI. A mixing conversion efficiency of -24.1 dB is obtained for a 3-junction array.

Japanese Journal of Applied Physics•Dec 1, 1996•1 citation
The application of high temperature superconductor Josephson junctions to voltage metrology is promising for many reasons, beyond the evident advantage of simplified cryogenics and reduced costs of the apparatus. Owing to their intrinsic non-hysteretic behavior, arrays of shunted bicrystal YBCO junctions are particularly interesting for the realization of an AC voltage standard with quantum accuracy. Moreover, shunted bicrystal YBCO junctions arrays are advantageous because of the reduced area of the junctions, the wide range of characteristic voltages, and large critical currents. However, some specific problems arise, like possible effects related to the higher operating temperature. Furthermore, fabrication technology sets tight constraints on the design of structures for the distribution of microwave currents along the array junctions. We investigated the step properties under millimeter wave irradiation at frequencies about 75 GHz of HTS junction and arrays prepared on bicrystal substrates having grain boundaries. High sensitivity techniques were adopted to evaluate the step flatness at nV level and assess the accuracy of the step voltage. A new method that makes use of an open resonator, was implemented to irradiate the array, providing synchronization of a large number of junctions.
We explored high-temperature superconductor Josephson junction arrays embedded in a hemispherical Fabry-Perot resonator. We compared the characteristics of three designs of arrays to achieve steps at higher voltage with a better coupling to the millimeter wave irradiation power. With an optimal design, we achieved a maximum Josephson voltage of about 0.1V for an array of 620 bicrystal junctions at a temperature of 79.2K and a frequency of 77.465 GHz. Also steps from 0.01 V up to 0.1 V were observed. Our results showed that such circuits are challenging for applications in quantum voltage metrology. It is important to note that our quasioptical coupling method can be extended up to terahertz frequencies.
High-temperature superconducting (HTS) Josephson junction (JJ) arrays with varied junction widths of 2-5 μm were fabricated on REBCO/Au-coated (La,Sr)(Al,Ta)O3 (LSAT) bicrystal substrates for quantum voltage standard applications. The HTS JJ arrays, consisting of five Josephson junctions connected in series, were irradiated via a Fabry-Pérot resonator. The HTS JJ series array with a 5 μm junction width exhibits the best overall performance. Under 66.72 GHz microwave irradiation at 77 K, the 5 μm-wide junction array exhibits a second-order quantum voltage of 1.3794 mV with a step width of 250 μA and voltage fluctuation of within 0.1 μV. At a lower temperature of 58.66 K and 69.516 GHz microwave irradiation, the same device produced a stable quantum voltage of 8.0494 mV, corresponding to the 11th to 12th order steps, with a step width of 100 μA and voltage fluctuation also confined to 0.1 μV.
We proposed a novel approach to self-radiation of Josephson junction arrays. Bicrystal Josephson junction arrays fabricated on a bicrystal substrate were integrated with a half-wavelength dipole array and embedded in a Fabry–Perot resonator. Considered as a dielectric resonator, the substrate could be stimulated to resonate in an appropriate mode at the same frequency as the Fabry–Perot resonator, which realized a coupling between Josephson junctions as well as a coupling between the junctions and microwave structures by means of a resonant interaction between junctions and resonators. Both simulations and experiments were performed. A YBCO bicrystal Josephson junction array with 166 junctions was measured at liquid nitrogen temperature. The maximal self-radiation power of 10 pW was detected at 75.2 GHz, which was in agreement with the simulation results.
High-temperature superconductor Josephson junction arrays were irradiated with millimeter-wave of approximately 70 GHz. The junction arrays were composed of 15 bicrystal YBCO junctions in series and produced DC voltage output of up to 2 mV, which was sampled by a commercial nanovoltmeter. The measured Vppof voltage fluctuations was on the order of 0.6 μV, exceeding the intrinsic fluctuation of the nanovoltmeter itself. To identify the origin of the excessive fluctuations, the phase noise and harmonic distortion of the millimeter-wave signal were analyzed and finally excluded from the major cause of the performance degradation. While millimeter-wave filtering and DC wiring of the apparatus can be improved, the results showed the feasibility of the millimeter-wave driving architecture and the noise analysis framework can be applied to development of even higher frequency drives into THz range.
We report the millimeter wave mixing properties of high-T c superconductor Josephson junction arrays using a waveguide-to-microstrip converter in the 100 GHz frequency range. The junction arrays consist of 3 weak links fabricated from EuBa2Cu3O7-δ thin films grown on an MgO bicrystal substrate. In these junction arrays, Shapiro steps are observed in the presence of 100 GHz irradiation at intervals of 3 times the fundamental step voltage. Millimeter wave mixing with an input local oscillator frequency of 99.142 GHz and an input signal frequency of 99.880 GHz is detected as the IF output at 738 MHz. The IF output power peaks at voltages corresponding to those of the dynamic resistance dV/ dI. A mixing conversion efficiency of -24.1 dB is obtained for a 3-junction array.