Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

High-speed operation of a 64-bit circular shift register

Andrea M. Herr, C.A. Mancini, Nada Vukovic, Mark F. Bocko, M. J. Feldman

Published Jan 1, 1998• 15 citations
Publisher

Abstract

A 64-bit superconducting rapid single flux quantum (RSFQ) circular shift register (CSR) has been demonstrated to operate at clock frequencies up to 18 GHz. The CSR was designed with special attention to timing constraints, which are more severe for "recurrent" circuits (where data must circulate around closed feedback loops) than for systolic arrays where only local timing constraints are relevant. The longest recurrent data path ever demonstrated previously was only several stages long. The testing scheme demonstrated here is unique in that the data circulated up to 50 million times before verification.

DOI
10.1109/77.712142

Related papers

Experimental investigation of RSFQ circular shift registers

Cesar A. Mancini, Nada Vukovic, Mark F. Bocko +2 more

Circular shift registers (CSRs) can be used in the implementation of superconducting digital signal processing blocks requiring the storage of data that needs to be accessed periodically with short access times and high throughput rate. The clock distribution networks of these shift registers has the unique constraint that the overall clock skew must be zero. Centered around this requirement, a design methodology for the design of these circuits has previously been developed and presented, resulting in three different designs for 64-bit versions of CSRs. We now present experimental results of the functional testing of two of these designs. These results show correct operation up to 13 GHz and set an important step for the complete validation of the design methodology presented earlier.

Applied Superconductivity•Oct 1, 1999•1 citation

RSFQ 1024-bit shift register for acquisition memory

Oleg A. Mukhanov

Rapid single flux quantum (RSFQ) 512-bit and 1024-bit shift registers have been demonstrated. These are the longest superconducting shift registers reported to date, employing 1045 and 2069 Josephson junctions, respectively. The circuit functionality has been confirmed with dc bias margins of +or-23% and +or-14% for the 512-bit and the 1024-bit shift registers, respectively. The 512-bit shift register has been tested to 20 GHz and 1024-bit register to 19 GHz using an external clock trigger with relative delay measurements at single and double SFQ clock frequencies. The shift registers with the same design have been used for successful implementation of the acquisition shift register (ASR) memory for the projected transient digitizer. These shift registers have the ability to acquire data at high speeds (gigahertz range), statically hold the acquired data, and then read-out the data into conventional room-temperature electronics at low speeds (megahertz range). A 32-bit ASR has been tested up to 18 GHz (the limit of our test setup), and a 1024-bit ASR-up to 16 GHz of acquisition rates, both at 33 MHz read-out frequency. Total power dissipation is about 1 mW for the 1024-bit circuit. The chips are fabricated using Hypres' Nb/AlO/sub x//Nb process with a junction critical current density of 1.0 kA/cm/sup 2/.>

IEEE Transactions on Applied Superconductivity•Jan 1, 1993•69 citations

Rapid single flux quantum (RSFQ) shift register family

Oleg A. Mukhanov

The author presents the design and test results for a novel, buffered RSFQ shift register. The register design makes it possible to build a circular 64-b shift register which is insensitive to the clock pulse direction within the experimentally measured DC bias margin of +or-15%. The implementation of a large variety of unidirectional shift registers using either a buffered or a two-Josephson-junction cell design confirms an expected wide DC bias margin of +or-30% (for a 32-b) and high speed, up to 60 GHz (for a 4-b register). Among these circuits is a 256-b shift register. To the author's knowledge, this is the largest RSFQ circuit (533 junctions) reported to date. This shift register was tested to have a DC bias margin of +or-6% and proper high-speed operation up to 12 GHz.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•76 citations

RSFQ circular shift registers

C.A. Mancini, Nada Vukovic, Andrea M. Herr +3 more

The circular shift register is a versatile building block for RSFQ digital circuits. It can be used for local memory and it is essential for the proposed implementation of residue number system arithmetic. It is surprising that the successful recurrent operation of such a shift register has never been reported m the RSFQ literature. Circular shift registers have a design constraint that is unusual in RSFQ circuits-the requirement of zero overall clock skew. We propose and analyze three novel designs and compare their simulated parameter margins as well as their maximum operating frequencies, latencies and areas. These designs differ in the topology of the clock distribution network as well as the type of storage element employed in the data path. Two designs show satisfactory parameter margins and large maximum clock frequency.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•26 citations

A high frequency test bench for rapid single-flux-quantum circuits

Henrik Engseth, Samuel Intiso, M R Rafique +2 more

We have designed and experimentally verified a test bench for high frequency testing of Rapid Single Flux Quantum (RSFQ) circuits. This test bench uses an external tuneable clock signal that is stable in amplitude, phase and frequency. The high frequency external clock reads out the clock pattern stored in a long shift-register. The clock pattern is consequently shifted out at high speed and splitted to feed both the circuit under test and an additional shift register in the test bench for later verification at low speed. This method can be employed for reliable high speed verification of RSFQ circuit operation, with use of only low speed readout electronics. The test bench consists of 158 Josephson junctions and occupied area is 3300 * 660 (mikro meter)^2. It was\nexperimentally verified up to 33 GHz with +- 21.7 % margins on the global bias supply current.

Superconductor Science and Technology•Mar 16, 2006•6 citations

Performance issues in single flux quantum shift registers

J.H. Hang, John X. Przybysz

Testing on a single-flux-quantum (SFQ) shift register fabricated with a SFQ Nb-AlO/sub x/Nb Josephson junction process indicates that a stable flux quantum can be stored in a rapid SFQ (RSFQ) shift register stage and be shifted by SFQ pulses. Design simulations showed that logic errors can occur in SFQ shift registers even though the circuit passes the average voltage test. Three-junction-per-stage shift registers had an advantage over the two-junction-per-stage shift register in handling data with successive 1's and in incorporating resistors to increase tolerance of trapped magnetic flux. Input and output buffers for data and clock pulses were added to get an RSFQ shift register to obtain correct performance. The highest error-free operation speed for the data with successive 1's is about half of the speed for propagation of a lone data 1. Error-free operation of SFQ shift registers with three junctions per stage could be obtained up to speeds of 30-60 GHz with Josephson junctions having I/sub c/R/sub n/ (critical-current-normal-resistance product) values of 600 mu V.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•8 citations
A 64-bit superconducting rapid single flux quantum (RSFQ) circular shift register (CSR) has been demonstrated to operate at clock frequencies up to 18 GHz. The CSR was designed with special attention to timing constraints, which are more severe for "recurrent" circuits (where data must circulate around closed feedback loops) than for systolic arrays where only local timing constraints are relevant. The longest recurrent data path ever demonstrated previously was only several stages long. The testing scheme demonstrated here is unique in that the data circulated up to 50 million times before verification.
Circular shift registers (CSRs) can be used in the implementation of superconducting digital signal processing blocks requiring the storage of data that needs to be accessed periodically with short access times and high throughput rate. The clock distribution networks of these shift registers has the unique constraint that the overall clock skew must be zero. Centered around this requirement, a design methodology for the design of these circuits has previously been developed and presented, resulting in three different designs for 64-bit versions of CSRs. We now present experimental results of the functional testing of two of these designs. These results show correct operation up to 13 GHz and set an important step for the complete validation of the design methodology presented earlier.
Rapid single flux quantum (RSFQ) 512-bit and 1024-bit shift registers have been demonstrated. These are the longest superconducting shift registers reported to date, employing 1045 and 2069 Josephson junctions, respectively. The circuit functionality has been confirmed with dc bias margins of +or-23% and +or-14% for the 512-bit and the 1024-bit shift registers, respectively. The 512-bit shift register has been tested to 20 GHz and 1024-bit register to 19 GHz using an external clock trigger with relative delay measurements at single and double SFQ clock frequencies. The shift registers with the same design have been used for successful implementation of the acquisition shift register (ASR) memory for the projected transient digitizer. These shift registers have the ability to acquire data at high speeds (gigahertz range), statically hold the acquired data, and then read-out the data into conventional room-temperature electronics at low speeds (megahertz range). A 32-bit ASR has been tested up to 18 GHz (the limit of our test setup), and a 1024-bit ASR-up to 16 GHz of acquisition rates, both at 33 MHz read-out frequency. Total power dissipation is about 1 mW for the 1024-bit circuit. The chips are fabricated using Hypres' Nb/AlO/sub x//Nb process with a junction critical current density of 1.0 kA/cm/sup 2/.>
The author presents the design and test results for a novel, buffered RSFQ shift register. The register design makes it possible to build a circular 64-b shift register which is insensitive to the clock pulse direction within the experimentally measured DC bias margin of +or-15%. The implementation of a large variety of unidirectional shift registers using either a buffered or a two-Josephson-junction cell design confirms an expected wide DC bias margin of +or-30% (for a 32-b) and high speed, up to 60 GHz (for a 4-b register). Among these circuits is a 256-b shift register. To the author's knowledge, this is the largest RSFQ circuit (533 junctions) reported to date. This shift register was tested to have a DC bias margin of +or-6% and proper high-speed operation up to 12 GHz.>
The circular shift register is a versatile building block for RSFQ digital circuits. It can be used for local memory and it is essential for the proposed implementation of residue number system arithmetic. It is surprising that the successful recurrent operation of such a shift register has never been reported m the RSFQ literature. Circular shift registers have a design constraint that is unusual in RSFQ circuits-the requirement of zero overall clock skew. We propose and analyze three novel designs and compare their simulated parameter margins as well as their maximum operating frequencies, latencies and areas. These designs differ in the topology of the clock distribution network as well as the type of storage element employed in the data path. Two designs show satisfactory parameter margins and large maximum clock frequency.
We have designed and experimentally verified a test bench for high frequency testing of Rapid Single Flux Quantum (RSFQ) circuits. This test bench uses an external tuneable clock signal that is stable in amplitude, phase and frequency. The high frequency external clock reads out the clock pattern stored in a long shift-register. The clock pattern is consequently shifted out at high speed and splitted to feed both the circuit under test and an additional shift register in the test bench for later verification at low speed. This method can be employed for reliable high speed verification of RSFQ circuit operation, with use of only low speed readout electronics. The test bench consists of 158 Josephson junctions and occupied area is 3300 * 660 (mikro meter)^2. It was\nexperimentally verified up to 33 GHz with +- 21.7 % margins on the global bias supply current.
Testing on a single-flux-quantum (SFQ) shift register fabricated with a SFQ Nb-AlO/sub x/Nb Josephson junction process indicates that a stable flux quantum can be stored in a rapid SFQ (RSFQ) shift register stage and be shifted by SFQ pulses. Design simulations showed that logic errors can occur in SFQ shift registers even though the circuit passes the average voltage test. Three-junction-per-stage shift registers had an advantage over the two-junction-per-stage shift register in handling data with successive 1's and in incorporating resistors to increase tolerance of trapped magnetic flux. Input and output buffers for data and clock pulses were added to get an RSFQ shift register to obtain correct performance. The highest error-free operation speed for the data with successive 1's is about half of the speed for propagation of a lone data 1. Error-free operation of SFQ shift registers with three junctions per stage could be obtained up to speeds of 30-60 GHz with Josephson junctions having I/sub c/R/sub n/ (critical-current-normal-resistance product) values of 600 mu V.>