Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

A high frequency test bench for rapid single-flux-quantum circuits

Henrik Engseth, Samuel Intiso, M R Rafique, E. Tolkacheva, Anna Kidiyarova-Shevchenko

Published Mar 16, 2006• 6 citations
Publisher

Abstract

We have designed and experimentally verified a test bench for high frequency testing of Rapid Single Flux Quantum (RSFQ) circuits. This test bench uses an external tuneable clock signal that is stable in amplitude, phase and frequency. The high frequency external clock reads out the clock pattern stored in a long shift-register. The clock pattern is consequently shifted out at high speed and splitted to feed both the circuit under test and an additional shift register in the test bench for later verification at low speed. This method can be employed for reliable high speed verification of RSFQ circuit operation, with use of only low speed readout electronics. The test bench consists of 158 Josephson junctions and occupied area is 3300 * 660 (mikro meter)^2. It was\nexperimentally verified up to 33 GHz with +- 21.7 % margins on the global bias supply current.

DOI
10.1088/0953-2048/19/5/s44

Related papers

Design and testing of rapid single flux quantum shift registers with magnetically coupled readout gates

Perng-Fei Yuh, Oleg A. Mukhanov

Experimental superconducting shift registers consisting of on-chip clock generators, clock regeneration and distribution circuits, shift register elements, and readout circuits are designed using rapid single flux quantum logic/memory (RSFQ) gates. A 7-b shift register has been tested to 12 GHz and a 17-b to 21 GHz using external triggering clocks with relative delay measurements. Testing with internal clocks generated from Josephson oscillations shows a potential high-speed operation of 45 GHz for the 7-b and 30 GHz for the 17-b shift registers. Two types of magnetically coupled readout gates are discussed. The chips are fabricated using a Nb/AlO/sub /x/Nb Josephson-junction process at a critical-current density of 1000 A/cm/sup 2/. The power dissipation per bit is 3 mu W.>

IEEE Transactions on Applied Superconductivity•Jan 1, 1992•20 citations

Bit-Error-Rate Measurements of RSFQ Shift Register Memories

T. Hikida, K. Fujiwara, Nobuyuki Yoshikawa +3 more

Error rates of rapid-single-flux-quantum (RSFQ) shift register memories were investigated using a high-speed error-rate measurement system in order to demonstrate their reliability and stability. We designed and implemented an 8 times 8-bit shift register memory using the CONNECT cell library and the SRL 2.5 kA/cm2Nb process. The total number of Josephson junctions including the test system is 4184, and the circuit area is 2.1 mm times 3.2 mm. We measured the error rates of every storage node by reading out the data 216times at the clock frequency of 16 GHz. The measured error rates were lower than 10-10with DC bias margin better than plusmn5%.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•5 citations

Performance issues in single flux quantum shift registers

J.H. Hang, John X. Przybysz

Testing on a single-flux-quantum (SFQ) shift register fabricated with a SFQ Nb-AlO/sub x/Nb Josephson junction process indicates that a stable flux quantum can be stored in a rapid SFQ (RSFQ) shift register stage and be shifted by SFQ pulses. Design simulations showed that logic errors can occur in SFQ shift registers even though the circuit passes the average voltage test. Three-junction-per-stage shift registers had an advantage over the two-junction-per-stage shift register in handling data with successive 1's and in incorporating resistors to increase tolerance of trapped magnetic flux. Input and output buffers for data and clock pulses were added to get an RSFQ shift register to obtain correct performance. The highest error-free operation speed for the data with successive 1's is about half of the speed for propagation of a lone data 1. Error-free operation of SFQ shift registers with three junctions per stage could be obtained up to speeds of 30-60 GHz with Josephson junctions having I/sub c/R/sub n/ (critical-current-normal-resistance product) values of 600 mu V.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•8 citations

High-speed operation of RSFQ circuits up to 30 GHz

Futoshi Furuta, Yasutoshi Suzuki, H. Hasegawa +3 more

We have experimentally demonstrated high-speed operation of RSFQ circuits using on-chip testing system and confirmed normal operation up to 30 GHz. The system includes high-frequency pulse generators and shift registers (SRs) serving as an interface circuit between high-speed internal signals and low-speed external signals. We adopted two ladder-type pulse generators. One generates clock pulses of 10 GHz and the other generates 25 GHz. By increasing bias currents of JTLs, clock pulses can be generated at higher frequency. By using the system, an SR and a T flip-flop (TFF) gate are examined. The circuits were fabricated by NEC's standard process based on Nb/AlO x /Nb junction technology with J c = 2.5 kA cm -2 . We optimized circuit parameters by using Monte Carlo simulation. In addition, the effect of parasitic inductances can be reduced by decreasing I c . As a result, the systems for SR and TFF worked correctly up to 30 GHz and 27.5 GHz, respectively. The SR and TFF have wide bias margins of ±39% and ±20%, respectively. We confirmed that the bias margins of the SR are independent of operation frequency. The limits of operation frequency are thought to be much higher than 30 GHz.

Superconductor Science and Technology•Nov 1, 1999•8 citations

Superconductive single-flux quantum technology

Oleg A. Mukhanov

Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Dec 17, 2002•8 citations

Experimental Verification of Superconductor Digital Circuits

Henrik Engseth

AbstractSuperconducting digital technology based on Rapid Single Flux Quantum (RSFQ) logic offers a 50 times faster clock rate and 100 times less on chip power consumption than today's mainstream semiconductor electronics. This technology is attractive for many applications and in particular for Digital Signal Processing (DSP). The applications of the RSFQ DSPs are numerous and include multi-user detection in spread spectrum system, channel equalization for Multi-in, Multi-out (MIMO) systems, and blind detection and signal tracking for signal intelligence.At Chalmers we are developing a hybrid DSP with target performance of 30 giga operations per second. It consists of an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory, and an external semiconductor memory. The development of the complex high speed cryogenic digital system requires interface, packaging and testing solutions. The main difficulties are due to the 4 K operational temperature, the high magnetic field sensitivity of the RSFQ circuits, the multi-channel high bandwidth interface required in the hybrid architecture, and the high speed RSFQ digital core. The key steps towards addressing each of these problems are the subject of this thesis. The main emphasis is put on the experimental testing and interfacing of superconductor electronics. A large part of the work is connected to the experimental verification of DSP components and their incremental improvement towards functionality. The RSFQ circuits tested were fabricated using the four-metal layer VLSI processes available from NGST(8 kA/cm^2 Josephson junction critical current) and HYPRES (both 1 kA/cm^2 and HYPRES 4.5 kA/cm^2. The main results of the work are demonstrations of the RSFQ cache memory with more than 2,000 Josephson junctions, 33.5 GHz operation of the digital clock controller, and 20.48 GHz operation of the autocorrelator. In addition, various experiments have been done for investigation of parasitic effects in RSFQ circuits such as flux trapping and influence of the high current bias lines.At the final stage of the work, a unique high bandwidth 4 K cryocooler based experimental setup has been developed. The system, developed in close cooperation with Hypres Inc. USA, has 40 high speed I/Os with bandwidth of 2 Gbps, 64 DC bias channels, 4 high frequency clock lines, and 4 auxiliary control lines. It supports exchangeable test units for 10 mm x 10 mm and 20 mm x 20 mm Multi Chip Module (MCM) carriers. The availability of such a system is critical to demonstration of the hybrid DSP prototype and future commercialization.

•Jan 1, 2005•0 citations
We have designed and experimentally verified a test bench for high frequency testing of Rapid Single Flux Quantum (RSFQ) circuits. This test bench uses an external tuneable clock signal that is stable in amplitude, phase and frequency. The high frequency external clock reads out the clock pattern stored in a long shift-register. The clock pattern is consequently shifted out at high speed and splitted to feed both the circuit under test and an additional shift register in the test bench for later verification at low speed. This method can be employed for reliable high speed verification of RSFQ circuit operation, with use of only low speed readout electronics. The test bench consists of 158 Josephson junctions and occupied area is 3300 * 660 (mikro meter)^2. It was\nexperimentally verified up to 33 GHz with +- 21.7 % margins on the global bias supply current.
Experimental superconducting shift registers consisting of on-chip clock generators, clock regeneration and distribution circuits, shift register elements, and readout circuits are designed using rapid single flux quantum logic/memory (RSFQ) gates. A 7-b shift register has been tested to 12 GHz and a 17-b to 21 GHz using external triggering clocks with relative delay measurements. Testing with internal clocks generated from Josephson oscillations shows a potential high-speed operation of 45 GHz for the 7-b and 30 GHz for the 17-b shift registers. Two types of magnetically coupled readout gates are discussed. The chips are fabricated using a Nb/AlO/sub /x/Nb Josephson-junction process at a critical-current density of 1000 A/cm/sup 2/. The power dissipation per bit is 3 mu W.>
Error rates of rapid-single-flux-quantum (RSFQ) shift register memories were investigated using a high-speed error-rate measurement system in order to demonstrate their reliability and stability. We designed and implemented an 8 times 8-bit shift register memory using the CONNECT cell library and the SRL 2.5 kA/cm2Nb process. The total number of Josephson junctions including the test system is 4184, and the circuit area is 2.1 mm times 3.2 mm. We measured the error rates of every storage node by reading out the data 216times at the clock frequency of 16 GHz. The measured error rates were lower than 10-10with DC bias margin better than plusmn5%.
Testing on a single-flux-quantum (SFQ) shift register fabricated with a SFQ Nb-AlO/sub x/Nb Josephson junction process indicates that a stable flux quantum can be stored in a rapid SFQ (RSFQ) shift register stage and be shifted by SFQ pulses. Design simulations showed that logic errors can occur in SFQ shift registers even though the circuit passes the average voltage test. Three-junction-per-stage shift registers had an advantage over the two-junction-per-stage shift register in handling data with successive 1's and in incorporating resistors to increase tolerance of trapped magnetic flux. Input and output buffers for data and clock pulses were added to get an RSFQ shift register to obtain correct performance. The highest error-free operation speed for the data with successive 1's is about half of the speed for propagation of a lone data 1. Error-free operation of SFQ shift registers with three junctions per stage could be obtained up to speeds of 30-60 GHz with Josephson junctions having I/sub c/R/sub n/ (critical-current-normal-resistance product) values of 600 mu V.>
We have experimentally demonstrated high-speed operation of RSFQ circuits using on-chip testing system and confirmed normal operation up to 30 GHz. The system includes high-frequency pulse generators and shift registers (SRs) serving as an interface circuit between high-speed internal signals and low-speed external signals. We adopted two ladder-type pulse generators. One generates clock pulses of 10 GHz and the other generates 25 GHz. By increasing bias currents of JTLs, clock pulses can be generated at higher frequency. By using the system, an SR and a T flip-flop (TFF) gate are examined. The circuits were fabricated by NEC's standard process based on Nb/AlO x /Nb junction technology with J c = 2.5 kA cm -2 . We optimized circuit parameters by using Monte Carlo simulation. In addition, the effect of parasitic inductances can be reduced by decreasing I c . As a result, the systems for SR and TFF worked correctly up to 30 GHz and 27.5 GHz, respectively. The SR and TFF have wide bias margins of ±39% and ±20%, respectively. We confirmed that the bias margins of the SR are independent of operation frequency. The limits of operation frequency are thought to be much higher than 30 GHz.
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>
AbstractSuperconducting digital technology based on Rapid Single Flux Quantum (RSFQ) logic offers a 50 times faster clock rate and 100 times less on chip power consumption than today's mainstream semiconductor electronics. This technology is attractive for many applications and in particular for Digital Signal Processing (DSP). The applications of the RSFQ DSPs are numerous and include multi-user detection in spread spectrum system, channel equalization for Multi-in, Multi-out (MIMO) systems, and blind detection and signal tracking for signal intelligence.At Chalmers we are developing a hybrid DSP with target performance of 30 giga operations per second. It consists of an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory, and an external semiconductor memory. The development of the complex high speed cryogenic digital system requires interface, packaging and testing solutions. The main difficulties are due to the 4 K operational temperature, the high magnetic field sensitivity of the RSFQ circuits, the multi-channel high bandwidth interface required in the hybrid architecture, and the high speed RSFQ digital core. The key steps towards addressing each of these problems are the subject of this thesis. The main emphasis is put on the experimental testing and interfacing of superconductor electronics. A large part of the work is connected to the experimental verification of DSP components and their incremental improvement towards functionality. The RSFQ circuits tested were fabricated using the four-metal layer VLSI processes available from NGST(8 kA/cm^2 Josephson junction critical current) and HYPRES (both 1 kA/cm^2 and HYPRES 4.5 kA/cm^2. The main results of the work are demonstrations of the RSFQ cache memory with more than 2,000 Josephson junctions, 33.5 GHz operation of the digital clock controller, and 20.48 GHz operation of the autocorrelator. In addition, various experiments have been done for investigation of parasitic effects in RSFQ circuits such as flux trapping and influence of the high current bias lines.At the final stage of the work, a unique high bandwidth 4 K cryocooler based experimental setup has been developed. The system, developed in close cooperation with Hypres Inc. USA, has 40 high speed I/Os with bandwidth of 2 Gbps, 64 DC bias channels, 4 high frequency clock lines, and 4 auxiliary control lines. It supports exchangeable test units for 10 mm x 10 mm and 20 mm x 20 mm Multi Chip Module (MCM) carriers. The availability of such a system is critical to demonstration of the hybrid DSP prototype and future commercialization.