Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Performance issues in single flux quantum shift registers

J.H. Hang, John X. Przybysz

Published Mar 1, 1993• 8 citations
Publisher

Abstract

Testing on a single-flux-quantum (SFQ) shift register fabricated with a SFQ Nb-AlO/sub x/Nb Josephson junction process indicates that a stable flux quantum can be stored in a rapid SFQ (RSFQ) shift register stage and be shifted by SFQ pulses. Design simulations showed that logic errors can occur in SFQ shift registers even though the circuit passes the average voltage test. Three-junction-per-stage shift registers had an advantage over the two-junction-per-stage shift register in handling data with successive 1's and in incorporating resistors to increase tolerance of trapped magnetic flux. Input and output buffers for data and clock pulses were added to get an RSFQ shift register to obtain correct performance. The highest error-free operation speed for the data with successive 1's is about half of the speed for propagation of a lone data 1. Error-free operation of SFQ shift registers with three junctions per stage could be obtained up to speeds of 30-60 GHz with Josephson junctions having I/sub c/R/sub n/ (critical-current-normal-resistance product) values of 600 mu V.>

DOI
10.1109/77.233511

Related papers

Design and testing of rapid single flux quantum shift registers with magnetically coupled readout gates

Perng-Fei Yuh, Oleg A. Mukhanov

Experimental superconducting shift registers consisting of on-chip clock generators, clock regeneration and distribution circuits, shift register elements, and readout circuits are designed using rapid single flux quantum logic/memory (RSFQ) gates. A 7-b shift register has been tested to 12 GHz and a 17-b to 21 GHz using external triggering clocks with relative delay measurements. Testing with internal clocks generated from Josephson oscillations shows a potential high-speed operation of 45 GHz for the 7-b and 30 GHz for the 17-b shift registers. Two types of magnetically coupled readout gates are discussed. The chips are fabricated using a Nb/AlO/sub /x/Nb Josephson-junction process at a critical-current density of 1000 A/cm/sup 2/. The power dissipation per bit is 3 mu W.>

IEEE Transactions on Applied Superconductivity•Jan 1, 1992•20 citations

RSFQ 1024-bit shift register for acquisition memory

Oleg A. Mukhanov

Rapid single flux quantum (RSFQ) 512-bit and 1024-bit shift registers have been demonstrated. These are the longest superconducting shift registers reported to date, employing 1045 and 2069 Josephson junctions, respectively. The circuit functionality has been confirmed with dc bias margins of +or-23% and +or-14% for the 512-bit and the 1024-bit shift registers, respectively. The 512-bit shift register has been tested to 20 GHz and 1024-bit register to 19 GHz using an external clock trigger with relative delay measurements at single and double SFQ clock frequencies. The shift registers with the same design have been used for successful implementation of the acquisition shift register (ASR) memory for the projected transient digitizer. These shift registers have the ability to acquire data at high speeds (gigahertz range), statically hold the acquired data, and then read-out the data into conventional room-temperature electronics at low speeds (megahertz range). A 32-bit ASR has been tested up to 18 GHz (the limit of our test setup), and a 1024-bit ASR-up to 16 GHz of acquisition rates, both at 33 MHz read-out frequency. Total power dissipation is about 1 mW for the 1024-bit circuit. The chips are fabricated using Hypres' Nb/AlO/sub x//Nb process with a junction critical current density of 1.0 kA/cm/sup 2/.>

IEEE Transactions on Applied Superconductivity•Jan 1, 1993•69 citations

A fast Josephson SFQ shift register

F. Kuo, Stephen R. Whiteley, S. M. Faris

A Josephson SFQ (single flux quantum) shift register circuit operating under a two-phase power was designed and tested. The test cell was fabricated using the Nb/AlO/sub x//Nb junction SNEAP process. The main data latch is DC biased; the data storage is accomplished by the transfer of a single flux quantum in or out of a SQUID (superconducting quantum interference device) superconducting loop. A two-phase sinusoidal clock with offset is used to operate the circuit. Simulations verify that the operating frequency can go beyond 70 GHz, with operating margins exceeding 20%. Preliminary measurements indicate that the circuit operates as intended.>

IEEE Transactions on Magnetics•Mar 1, 1989•5 citations

Single flux quantum digital devices

V. P. Koshelets

A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.

Superconductor Science and Technology•Nov 1, 1991•5 citations

Low error operation of a 4 stage single flux quantum shift register built with Y-Ba-Cu-O bicrystal Josephson junctions

J.H. Park, J.H. Kang, Tae Bong Jung +5 more

We fabricated a 4 stage single flux quantum shift register with YBa/sub 2/Cu/sub 3/O/sub x/ (YBCO) bicrystal Josephson junctions and demonstrated the circuit's low error operation by using a computer controlled digital measurement set-up. The circuit was operated at 65 K. Binary data sequences of "1000", "1010", "1011," and "1111" were successfully loaded and shifted in the circuit. The two read SQUIDs placed next to each side of the shift register were used to sense all the individual data states. By operating the circuit with the proper current pulses, we observed no errors during 16 hours, which is equivalent to 21,000 error-free data shifts. We also found that temperature dependent inductance and junction critical currents limit the operating temperature range of the circuit, and the effective thermal noise temperature can be lower than 100 K.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•3 citations

Superconductive single-flux quantum technology

Oleg A. Mukhanov

Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Dec 17, 2002•8 citations
Testing on a single-flux-quantum (SFQ) shift register fabricated with a SFQ Nb-AlO/sub x/Nb Josephson junction process indicates that a stable flux quantum can be stored in a rapid SFQ (RSFQ) shift register stage and be shifted by SFQ pulses. Design simulations showed that logic errors can occur in SFQ shift registers even though the circuit passes the average voltage test. Three-junction-per-stage shift registers had an advantage over the two-junction-per-stage shift register in handling data with successive 1's and in incorporating resistors to increase tolerance of trapped magnetic flux. Input and output buffers for data and clock pulses were added to get an RSFQ shift register to obtain correct performance. The highest error-free operation speed for the data with successive 1's is about half of the speed for propagation of a lone data 1. Error-free operation of SFQ shift registers with three junctions per stage could be obtained up to speeds of 30-60 GHz with Josephson junctions having I/sub c/R/sub n/ (critical-current-normal-resistance product) values of 600 mu V.>
Experimental superconducting shift registers consisting of on-chip clock generators, clock regeneration and distribution circuits, shift register elements, and readout circuits are designed using rapid single flux quantum logic/memory (RSFQ) gates. A 7-b shift register has been tested to 12 GHz and a 17-b to 21 GHz using external triggering clocks with relative delay measurements. Testing with internal clocks generated from Josephson oscillations shows a potential high-speed operation of 45 GHz for the 7-b and 30 GHz for the 17-b shift registers. Two types of magnetically coupled readout gates are discussed. The chips are fabricated using a Nb/AlO/sub /x/Nb Josephson-junction process at a critical-current density of 1000 A/cm/sup 2/. The power dissipation per bit is 3 mu W.>
Rapid single flux quantum (RSFQ) 512-bit and 1024-bit shift registers have been demonstrated. These are the longest superconducting shift registers reported to date, employing 1045 and 2069 Josephson junctions, respectively. The circuit functionality has been confirmed with dc bias margins of +or-23% and +or-14% for the 512-bit and the 1024-bit shift registers, respectively. The 512-bit shift register has been tested to 20 GHz and 1024-bit register to 19 GHz using an external clock trigger with relative delay measurements at single and double SFQ clock frequencies. The shift registers with the same design have been used for successful implementation of the acquisition shift register (ASR) memory for the projected transient digitizer. These shift registers have the ability to acquire data at high speeds (gigahertz range), statically hold the acquired data, and then read-out the data into conventional room-temperature electronics at low speeds (megahertz range). A 32-bit ASR has been tested up to 18 GHz (the limit of our test setup), and a 1024-bit ASR-up to 16 GHz of acquisition rates, both at 33 MHz read-out frequency. Total power dissipation is about 1 mW for the 1024-bit circuit. The chips are fabricated using Hypres' Nb/AlO/sub x//Nb process with a junction critical current density of 1.0 kA/cm/sup 2/.>
A Josephson SFQ (single flux quantum) shift register circuit operating under a two-phase power was designed and tested. The test cell was fabricated using the Nb/AlO/sub x//Nb junction SNEAP process. The main data latch is DC biased; the data storage is accomplished by the transfer of a single flux quantum in or out of a SQUID (superconducting quantum interference device) superconducting loop. A two-phase sinusoidal clock with offset is used to operate the circuit. Simulations verify that the operating frequency can go beyond 70 GHz, with operating margins exceeding 20%. Preliminary measurements indicate that the circuit operates as intended.>
A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.
We fabricated a 4 stage single flux quantum shift register with YBa/sub 2/Cu/sub 3/O/sub x/ (YBCO) bicrystal Josephson junctions and demonstrated the circuit's low error operation by using a computer controlled digital measurement set-up. The circuit was operated at 65 K. Binary data sequences of "1000", "1010", "1011," and "1111" were successfully loaded and shifted in the circuit. The two read SQUIDs placed next to each side of the shift register were used to sense all the individual data states. By operating the circuit with the proper current pulses, we observed no errors during 16 hours, which is equivalent to 21,000 error-free data shifts. We also found that temperature dependent inductance and junction critical currents limit the operating temperature range of the circuit, and the effective thermal noise temperature can be lower than 100 K.
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>