Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Electronics Letters

Compact atomic clock based on coherent populationtrapping

J. Kitching, Leo W. Hollberg, S. Knappe, R. Wynands

Published Nov 22, 2001• 57 citations
Publisher

Abstract

A simple, compact, low-power physics package for a vapour-cell atomic clock is described. The device measures 6.6 × 1.6 × 1.3 cm and dissipates less than 30 mW of electrical power without thermal control. The instability is 1.3 × 10-10/√[τ/(s)] for integration times τ below 100 s. Applications for this device include distributed telecommunications systems, advanced global positioning system (GPS) receivers and laboratory instrumentation.

DOI
10.1049/el:20010959

Related papers

The Chip-Scale Atomic Clock - Low-Power Physics Package

Robert Lutwak, Jinyi Deng, William Riley +7 more

We have undertaken a development effort to produce a prototype chip-scale atomic clock (CSAC). The design goals include short-term stability, with a total power consumption of less than 30 mW and overall device volume <1 cubic cm. The stringent power requirement dominates the physics package architecture, necessarily dictating a small volume gaseous atomic ensemble interrogated by a low-power semiconductor laser. At PTTI 2002 and PTTI 2003, we reported on laboratory experiments that underlie the fundamental architecture of our CSAC, based on interrogation of the cesium D1 transition by the technique of coherent population trapping (CPT). In the past year, the development effort has shifted from fundamental research and feasibility investigation to engineering and prototype development. In this paper, we report on the design of a rugged and compact physics package that is expected to exceed the ultimate performance and power requirements of the CSAC.

•Dec 1, 2004•63 citations

Microfabricated atomic clocks and magnetometers

Svenja A. Knappe, Peter D. D. Schwindt, Vladislav P. Gerginov +6 more

We demonstrate the critical subsystems of a compact atomic clock based on a microfabricated physics package. The clock components have a total volume below 10 cm3, a fractional frequency instability of 6 × 10−10/τ1/2, and consume 200 mW of power. The physics package is easily adapted to function as a magnetometer with sensitivity below 50 pT Hz−1/2 at 10 Hz.

Journal of Optics A Pure and Applied Optics•May 31, 2006•70 citations

CPT atomic clock based on rubidium 85

C. Schori, G. Mileti, B. Leuenbeger +1 more

We present a compact physics package based on coherent population trapping (CPT) in rubidium 85. The architecture of the package is described along with results obtained using optical- and microwave spectroscopy. We also report the stability of the CPT resonance to variations in operating parameters such as microwave modulation power and vapour cell temperature. With this package we obtain a short term frequency stability σy(τ) = 7·10-11·τ-1/2(τy(τ) ~ 1·10-11( 100 sec4sec).

European Frequency and Time Forum•Apr 1, 2010•12 citations

The Chip-Scale Atomic Clock - Recent Development Progress

Robert Lutwak, Donald A. Emmons, Thomas C. English +1 more

We have undertaken the development of a chip-scale atomic clock (CSAC) whose design goals include short-term stability, sigma(sub y)(tau=1 hour), of 1x10(exp 11) with a total power consumption of 30 mW and an overall device volume of 1 cu cm. The stringent power requirement dominates the physics package architecture, dictating a small (<5 mm(exp 3) gaseous atomic ensemble interrogated by a low-power semiconductor laser. At PTTI 2002, we reported on initial experimental investigations leading to the decision to employ the coherent population trapping (CPT) interrogation technique. This paper describes our further progress on the CSAC effort, including the development of custom vertical cavity surface emitting laser (VCSEL) sources and techniques for microfabricating miniature cesium vapor cells comprised of anodically bonded silicon and glass. Measurements of the signal contrast and linewidth of both the cesium D1 and D2 resonance transitions are compared, and frequency stability measurements of the CSAC testbed are presented.

•Sep 1, 2004•55 citations

Microfabricated atomic clocks and magnetometers

Svenja A. Knappe, Peter D. D. Schwindt, Vladislav P. Gerginov +6 more

We demonstrate the critical subsystems of compact atomic clocks and magnetometers based on microfabricated physics packages. The clock components have a volume below 5 cm3, a fractional frequency instability below 6times10-10tau1/2, and consume 200 mW of power. The magnetometer has a sensitivity below 40pT/Hz1/2at 50 Hz

IEEE/LEOS International Conference on Optical MEMS•Oct 11, 2006•2 citations

COMPACT MICROWAVE FREQUENCY REFERENCE BASED ON COHERENT POPULATION TRAPPING

John E. Kitching, H. G. Robinson, Leo W. Hollberg +2 more

A simple, compact and low-power microwave frequency reference based on CPT resonances in Cs vapor is described. The 14 cm 3 physics package exhibits a resonance width of 620 Hz at 4.6 GHz, a short-term fractional frequency instability of , and dissipates less than 30 mW, not including temperature control. We discuss the prospects for extreme miniaturization to sub-millimeter dimensions.

Symposium on Frequency Standards and Metrology•May 1, 2002•8 citations
A simple, compact, low-power physics package for a vapour-cell atomic clock is described. The device measures 6.6 × 1.6 × 1.3 cm and dissipates less than 30 mW of electrical power without thermal control. The instability is 1.3 × 10-10/√[τ/(s)] for integration times τ below 100 s. Applications for this device include distributed telecommunications systems, advanced global positioning system (GPS) receivers and laboratory instrumentation.
We have undertaken a development effort to produce a prototype chip-scale atomic clock (CSAC). The design goals include short-term stability, with a total power consumption of less than 30 mW and overall device volume <1 cubic cm. The stringent power requirement dominates the physics package architecture, necessarily dictating a small volume gaseous atomic ensemble interrogated by a low-power semiconductor laser. At PTTI 2002 and PTTI 2003, we reported on laboratory experiments that underlie the fundamental architecture of our CSAC, based on interrogation of the cesium D1 transition by the technique of coherent population trapping (CPT). In the past year, the development effort has shifted from fundamental research and feasibility investigation to engineering and prototype development. In this paper, we report on the design of a rugged and compact physics package that is expected to exceed the ultimate performance and power requirements of the CSAC.
We have undertaken the development of a chip-scale atomic clock (CSAC) whose design goals include short-term stability, sigma(sub y)(tau=1 hour), of 1x10(exp 11) with a total power consumption of 30 mW and an overall device volume of 1 cu cm. The stringent power requirement dominates the physics package architecture, dictating a small (<5 mm(exp 3) gaseous atomic ensemble interrogated by a low-power semiconductor laser. At PTTI 2002, we reported on initial experimental investigations leading to the decision to employ the coherent population trapping (CPT) interrogation technique. This paper describes our further progress on the CSAC effort, including the development of custom vertical cavity surface emitting laser (VCSEL) sources and techniques for microfabricating miniature cesium vapor cells comprised of anodically bonded silicon and glass. Measurements of the signal contrast and linewidth of both the cesium D1 and D2 resonance transitions are compared, and frequency stability measurements of the CSAC testbed are presented.