Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Superconducting modulators for high dynamic range delta-sigma analog-to-digital converters

A. Hodge Worsham, Donald L. Miller, Paul D. Dresselhaus, A. H. Miklich, John X. Przybysz

Published Jun 1, 1999• 26 citations
Publisher

Abstract

Superconducting digital circuits are capable of producing high dynamic range analog-to-digital converters (ADCs). We present sigma-delta architectures using large (>100) oversampling ratios to give signal-to-noise ratios of greater than 100 dB in simulation. Three distinct designs, using two distinct mechanisms for feedback, are presented. All of the designs use only shunted junctions, and are therefore compatible with HTS SNS junctions. Simulations are presented for a modulator which creates feedback pulses by SQUID lobe-crossings, a modulator which uses the transresistance of a SQUID for feedback, and a modulator which uses threshold crossings in both the first and second loops for feedback.

DOI
10.1109/77.783699

Related papers

Flux quantum sigma-delta analog-to-digital converters for rf signals

Donald L. Miller, John X. Przybysz, A. Hodge Worsham +1 more

The sigma-delta architecture is the method of choice for analog-to-digital converters (ADCs) for high dynamic range applications. This architecture uses oversampling and precise feedback to generate a shaped spectral distribution of the quantization noise. Subsequent digital filtering suppresses out-of-band quantization noise, yielding a large signal to in-band noise ratio. A unique advantage of superconducting electronics is the availability of the flux quantum to provide quantum mechanically accurate feedback at GHz rates. Josephson digital technology extends sigma-delta ADCs from MHz sampling rates to GHz sampling rates, from kHz signal bandwidths to MHz signal bandwidths, with comparable or better dynamic range when compared to semiconductor implementations. This paper presents circuits for Josephson sigma-delta ADCs, including single-loop and double-loop modulators operating at sampling rates up to 2 GHz, and circuits for quantized feedback. The first demonstration of double-loop noise shaping is also presented.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•25 citations

A Quantum-Accurate Two-Loop Data Converter

Quentin Herr, Donald L. Miller, Aaron A. Pesetski +1 more

High performance oversampling delta-sigma data converters require high clock rates and accurate feedback of the digital output to the analog regime. Superconductor modulators offer the unique advantages of clock rates in the tens-of-gigahertz, comparator switching energy below attoJoules, and quantum-accurate digital-to-analog feedback. We have designed a two-loop baseband modulator whose noise transfer function was calculated using a simple, linear circuit model. The circuit was fabricated in a commercial superconductor IC process with 4.5 kA-per-square cm Josephson junctions and 1.5 micron minimum feature size. The circuit was tested at a derated sample rate of 5 GHz. Measured signal-to-noise dynamic range was 81 dB over a 10 MHz band. Third-order intercept was measured to be +24 dBsat in two-tone test. The measured noise transfer function was in excellent agreement with our linear model. The linear model indicates that with appropriate parameter values, this family of modulators extrapolates to significantly higher performance.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•6 citations

Superconducting modulators for analog-to-digital converters

Peter Magnusson

The main topic of this thesis is the evaluation of performance of super-conducting rst- and second-order low-pass sigma-delta modulators. Superconducting electronics comprise characteristics such as very high switching speed, natural quantization, high sensitivity and low noise, proper-ties that are all essential for modulators used in high performance analog-to-digital converters (ADC). Sigma-delta modulators trade speed for improved resolution using feedback mechanisms making superconducting electronics an interesting alternative technology for the implementation. With linear models and device-level simulations the performance of these modulators have been evaluated. The linear model of the rst-order sigma-delta modulator shows that the performance, for a given oversampling ratio, only depends on the cut-o frequency of the RL-lter used. This is veried by device-level simulations and the results from the two methods are in good agreement. Device-level simulations of the second-order sigma-delta modu-

•Jan 1, 2005•1 citation

Analogue demonstration of a high temperature superconducting sigma-delta modulator with 27 GHz sampling

Martin G. Forrester, B. D. Hunt, Donald L. Miller +2 more

We have successfully fabricated and tested a high temperature superconducting (HTS) sigma-delta modulator for analogue-to-digital conversion. This is the first demonstration of a GHz sampling A-to-D in HTS. The 15-junction single-flux-quantum (SFQ) circuit, fabricated using an epitaxial multilayer HTS process with YBCO/Co-YBCO/YBCO edge junctions, was internally clocked at 27 GHz and used to convert a 5.01 MHz signal. The modulator demonstrated a spur-free dynamic range of more than 75 dB. Two-tone measurements with 5.01 MHz and 5.51 MHz signals demonstrated third-order intermodulation products to be lower than -59 dBc. Demonstration of a functional HTS modulator represents a significant milestone in the development of high dynamic range ADCs suitable for such applications as surveillance radar.

Superconductor Science and Technology•Nov 1, 1999•11 citations

Superconducting second-order sigma-delta modulators utilizing multi-flux-quantum generators

T. Hashimoto, H. Hasegawa, Shuichi Nagasawa +3 more

We have been developing a superconducting second-order sigma-delta analog-to-digital converter with a large bandwidth and a large dynamic range for software radio applications. In a superconducting second-order sigma-delta modulator utilizing a passive integrator and single-flux-quantum (SFQ) feedback, gain to compensate the large attenuation in the passive integrator of the modulator is required to obtain a large dynamic range. In this paper, a second-order modulator utilizing multi-flux-quantum (MFQ) generators creating the needed gain is reported and the design and experimental test results of the elementary circuits including a comparator, a first-order modulator, and the MFQ generator are described. The digital outputs of the comparator and the first-order modulator were experimentally evaluated, where the input dependence of the comparator switching probability and the noise-shaping properties of the modulator were clearly observed. The low speed operation of the MFQ generator creating three SFQ pulses was experimentally confirmed. The other circuits were also tested at low frequencies.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•12 citations

Analysis of superconducting analog-to-digital converter front-end for improved resolution and large dynamic range

Pascal Febvre, Héla Gassara, Patricia Desgreys +1 more

Analog-to-digital converters (ADCs) are key components of most digital systems, as the necessary interface between the analogue world to send and receive signals. Semiconductor ADC systems are intrinsically limited to low frequency ranges of a few GHz and associated to dynamic ranges limited by linearity issues. Superconductor electronic ADCs rely on the magnetic flux quantization and do not suffer from the linearity issues. Moreover, the Rapid-Single-Flux Quantum (RSFQ) technique [1] allows the sampling of signals far in the microwave range, of the order of 100 GHz for the fastest circuits with state-of-the-art low critical temperature niobium-based technology.Two main applications require the use of fast and high dynamic range superconducting ADCs: future ground- or space-based telecommunication systems for software defined radio (SDR) and all systems requiring very high dynamic range in the 120-180 dB range. In this last category, one can find the digital Superconducting Quantum Interference Devices (SQUIDs) that combine the digitization due to the RSFQ technique, with the ultrasensitive sensing of magnetic fields, that are of interest for several applications, ranging from Non-Destructive Evaluation (NDE) to the detection of faint geomagnetic signatures [2].In this work, we will describe in details an analysis of performances of two different kinds of ADCs, respectively for space and geophysics applications. New designs with their electrical circuits will be described for operation in the microwave frequency band with a sigma-delta architecture, and for improved dynamic range with a delta design. The performance in terms of number of bits or dynamic range, frequency bandwidth and ultimate sampling speed will be compared with the ones of existing ADCs. Considerations about the layout due to technological considerations are taken into account in the design. Trade-offs between performance and technologies will be emphasized.[1] K. Likharev and V. Semenov, IEEE Trans. Appl. Supercond. 1, 3 (1991).[2] T. Reich, P. Febvre, T. Ortlepp, F. H. Uhlmann, J. Kunert, R. Stolz, and H.-G. Meyer, Journal of Applied Physics 104(2), 024509 (2008).

•Apr 25, 2010•0 citations
Superconducting digital circuits are capable of producing high dynamic range analog-to-digital converters (ADCs). We present sigma-delta architectures using large (>100) oversampling ratios to give signal-to-noise ratios of greater than 100 dB in simulation. Three distinct designs, using two distinct mechanisms for feedback, are presented. All of the designs use only shunted junctions, and are therefore compatible with HTS SNS junctions. Simulations are presented for a modulator which creates feedback pulses by SQUID lobe-crossings, a modulator which uses the transresistance of a SQUID for feedback, and a modulator which uses threshold crossings in both the first and second loops for feedback.
The sigma-delta architecture is the method of choice for analog-to-digital converters (ADCs) for high dynamic range applications. This architecture uses oversampling and precise feedback to generate a shaped spectral distribution of the quantization noise. Subsequent digital filtering suppresses out-of-band quantization noise, yielding a large signal to in-band noise ratio. A unique advantage of superconducting electronics is the availability of the flux quantum to provide quantum mechanically accurate feedback at GHz rates. Josephson digital technology extends sigma-delta ADCs from MHz sampling rates to GHz sampling rates, from kHz signal bandwidths to MHz signal bandwidths, with comparable or better dynamic range when compared to semiconductor implementations. This paper presents circuits for Josephson sigma-delta ADCs, including single-loop and double-loop modulators operating at sampling rates up to 2 GHz, and circuits for quantized feedback. The first demonstration of double-loop noise shaping is also presented.
High performance oversampling delta-sigma data converters require high clock rates and accurate feedback of the digital output to the analog regime. Superconductor modulators offer the unique advantages of clock rates in the tens-of-gigahertz, comparator switching energy below attoJoules, and quantum-accurate digital-to-analog feedback. We have designed a two-loop baseband modulator whose noise transfer function was calculated using a simple, linear circuit model. The circuit was fabricated in a commercial superconductor IC process with 4.5 kA-per-square cm Josephson junctions and 1.5 micron minimum feature size. The circuit was tested at a derated sample rate of 5 GHz. Measured signal-to-noise dynamic range was 81 dB over a 10 MHz band. Third-order intercept was measured to be +24 dBsat in two-tone test. The measured noise transfer function was in excellent agreement with our linear model. The linear model indicates that with appropriate parameter values, this family of modulators extrapolates to significantly higher performance.
The main topic of this thesis is the evaluation of performance of super-conducting rst- and second-order low-pass sigma-delta modulators. Superconducting electronics comprise characteristics such as very high switching speed, natural quantization, high sensitivity and low noise, proper-ties that are all essential for modulators used in high performance analog-to-digital converters (ADC). Sigma-delta modulators trade speed for improved resolution using feedback mechanisms making superconducting electronics an interesting alternative technology for the implementation. With linear models and device-level simulations the performance of these modulators have been evaluated. The linear model of the rst-order sigma-delta modulator shows that the performance, for a given oversampling ratio, only depends on the cut-o frequency of the RL-lter used. This is veried by device-level simulations and the results from the two methods are in good agreement. Device-level simulations of the second-order sigma-delta modu-
We have successfully fabricated and tested a high temperature superconducting (HTS) sigma-delta modulator for analogue-to-digital conversion. This is the first demonstration of a GHz sampling A-to-D in HTS. The 15-junction single-flux-quantum (SFQ) circuit, fabricated using an epitaxial multilayer HTS process with YBCO/Co-YBCO/YBCO edge junctions, was internally clocked at 27 GHz and used to convert a 5.01 MHz signal. The modulator demonstrated a spur-free dynamic range of more than 75 dB. Two-tone measurements with 5.01 MHz and 5.51 MHz signals demonstrated third-order intermodulation products to be lower than -59 dBc. Demonstration of a functional HTS modulator represents a significant milestone in the development of high dynamic range ADCs suitable for such applications as surveillance radar.
We have been developing a superconducting second-order sigma-delta analog-to-digital converter with a large bandwidth and a large dynamic range for software radio applications. In a superconducting second-order sigma-delta modulator utilizing a passive integrator and single-flux-quantum (SFQ) feedback, gain to compensate the large attenuation in the passive integrator of the modulator is required to obtain a large dynamic range. In this paper, a second-order modulator utilizing multi-flux-quantum (MFQ) generators creating the needed gain is reported and the design and experimental test results of the elementary circuits including a comparator, a first-order modulator, and the MFQ generator are described. The digital outputs of the comparator and the first-order modulator were experimentally evaluated, where the input dependence of the comparator switching probability and the noise-shaping properties of the modulator were clearly observed. The low speed operation of the MFQ generator creating three SFQ pulses was experimentally confirmed. The other circuits were also tested at low frequencies.
Analog-to-digital converters (ADCs) are key components of most digital systems, as the necessary interface between the analogue world to send and receive signals. Semiconductor ADC systems are intrinsically limited to low frequency ranges of a few GHz and associated to dynamic ranges limited by linearity issues. Superconductor electronic ADCs rely on the magnetic flux quantization and do not suffer from the linearity issues. Moreover, the Rapid-Single-Flux Quantum (RSFQ) technique [1] allows the sampling of signals far in the microwave range, of the order of 100 GHz for the fastest circuits with state-of-the-art low critical temperature niobium-based technology.Two main applications require the use of fast and high dynamic range superconducting ADCs: future ground- or space-based telecommunication systems for software defined radio (SDR) and all systems requiring very high dynamic range in the 120-180 dB range. In this last category, one can find the digital Superconducting Quantum Interference Devices (SQUIDs) that combine the digitization due to the RSFQ technique, with the ultrasensitive sensing of magnetic fields, that are of interest for several applications, ranging from Non-Destructive Evaluation (NDE) to the detection of faint geomagnetic signatures [2].In this work, we will describe in details an analysis of performances of two different kinds of ADCs, respectively for space and geophysics applications. New designs with their electrical circuits will be described for operation in the microwave frequency band with a sigma-delta architecture, and for improved dynamic range with a delta design. The performance in terms of number of bits or dynamic range, frequency bandwidth and ultimate sampling speed will be compared with the ones of existing ADCs. Considerations about the layout due to technological considerations are taken into account in the design. Trade-offs between performance and technologies will be emphasized.[1] K. Likharev and V. Semenov, IEEE Trans. Appl. Supercond. 1, 3 (1991).[2] T. Reich, P. Febvre, T. Ortlepp, F. H. Uhlmann, J. Kunert, R. Stolz, and H.-G. Meyer, Journal of Applied Physics 104(2), 024509 (2008).