Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Fabrication and measurement of a Nb based superconducting single electron transistor

Y. Harada, David B. Haviland, Per Delsing, C. D. Chen, T. Claeson

Published Aug 1, 1994• 52 citations
Publisher

Abstract

A new four-layer resist system was developed to fabricate small capacitance niobium tunnel junctions. Nb/AlOx/Al junctions were used to make a superconducting single electron transistor composed of two dc SQUIDs in series. The current-voltage characteristics were measured and two types of resonant tunneling of Cooper pairs were observed at different magnetic fields.

DOI
10.1063/1.112255

Related papers

Cooper-pair resonances and subgap Coulomb blockade in a superconducting single-electron transistor

J. Jussi Toppari, Thomas Kühn, Ari Halvari +3 more

We have fabricated and measured superconducting single-electron transistors with Al leads and Nb islands. At bias voltages below the gap of Nb we observe clear signatures of resonant tunneling of Cooper pairs, and of Coulomb blockade of the subgap currents due to linewidth broadening of the energy levels in the superconducting density of states of Nb. The experimental results are in good agreement with numerical simulations.

arXiv:cond-mat/0311148•Physical Review B•Nov 21, 2007•21 citations

Nb/AlOx/Nb Josephson Tunnel Junctions Using Electron Beam Evaporation

Atsuki Inoue, Akiyoshi Nakayama, Yoichi Okabe

Niobium/aluminum-oxide/niobium Josephson tunnel junctions have been fabricated using electron beam evaporation to form all-metal films in a high vacuum system. A quality factor, V m (the product of the maximum dc Josephson current and the subgap resistance defined at 2 mV) between 36–37 mV, has been obtained for the best junctions of a 6 nm-thick Al layer by cooling down the surface of the base electrode for 100 minutes under a high background pressure, before the deposition of aluminum, after the formation of the base niobium electrode. An array of 80 series-connected junctions has also been fabricated using the selective niobium anodization process and the planarization process. The current-voltage characteristics of the array showed a standard deviation of the maximum dc Josephson current of 3.3%.

Japanese Journal of Applied Physics•Jul 1, 1988•10 citations

Fabrication of ultrasmall Nb-AlOx-Nb Josephson tunnel junctions

John M. Martinis, Ronald H. Ono

We describe a fabrication process to make Nb-AlOx-Nb edge junctions with areas as small as 0.0022 μm2 and with current densities from 10 to 24 000 A/cm2. The junction conductance was low for voltages below the superconducting energy gap which indicates good quality tunnel barriers. Coulomb gap measurements obtained when the junctions were in the normal state were used to find the junction capacitance. Junction capacitance as small as 0.18 fF has been measured.

Applied Physics Letters•Aug 6, 1990•34 citations

Development of Nb/Al–AlOx/Nb Tunnel Junction for Large-Scale Integrated Digital Circuits

Wei Xiong, Liliang Ying, Yu Wu +3 more

We present the latest development of an Nb/Al-AlOx/Nb Josephson junction fabrication process for superconducting integrated circuits at SIMIT. Our fabrication process has four niobium superconducting layers and one Ti/Pd resistor layer with 1.0 Ω/square sheet resistor for junction shunting and circuit biasing. Critical current density Jcof the junctions is controlled from 30 A/cm2to 10 kA/cm2by exposing aluminum layer to pure or mixed O2atmosphere. Correlation between measured Jcand exposure conditions has been established. Average quality factor (Rsg/Rn) of the junctions in our process is larger than 20 with subgap leakage factor (Vm) beyond 30 mV. Critical current uniformity is obtained according to the switching current (Is) distribution of a 1000-JJ array. Measured standard deviation sigma of Isis less than 4% over the 100-mm wafer. Plasma resonance in a large Josephson junction is used to measure specific capacitance (Cs) of the junction. Sheet inductances of superconducting niobium strip-lines are extracted by a SQUID diagnose circuit and the measured results show good agreement with our design values.

IEEE Transactions on Applied Superconductivity•Dec 24, 2016•13 citations

Circuit with small-capacitance high-quality Nb Josephson junctions

道生 渡部, Yasunobu Nakamura, Jaw-Shen Tsai

We have developed a fabrication process for nanoscale tunnel junctions which includes focused-ion-beam etching from different directions. By applying the process to a Nb/(Al–)Al2O3/Nb trilayer, we have fabricated a Nb single-electron transistor (SET), and characterized the SET at low temperatures, T=0.04–40 K. The superconducting gap energy and the transition temperature of the Nb SET agree with the bulk values, which suggests high quality Nb junctions. The single-electron charging energy of the SET is estimated to be larger than 1 K.

arXiv:cond-mat/0311332•Applied Physics Letters•Jan 13, 2004•24 citations

Small-Capacitance Josephson Junctions: One-Dimensional Arrays and Single Junctions

道生 渡部, David B. Haviland

We review experiments on small-capacitance Josephson junctions. When the Josephson junction is fabricated in the configuration of dc superconducting quantum interference device (SQUID), the Josephson coupling can be tuned IN SITU with an external magnetic field. The electrical transport properties of one-dimensional arrays of small-capacitance dc SQUIDs have been investigated in order to study the superconductor-insulator transition. The arrays have also been used to bias a single Josephson junction, and a clear Coulomb blockade of Cooper-pair tunneling has been observed in the single junction.

arXiv:cond-mat/0301340•Jan 20, 2003•6 citations
A new four-layer resist system was developed to fabricate small capacitance niobium tunnel junctions. Nb/AlOx/Al junctions were used to make a superconducting single electron transistor composed of two dc SQUIDs in series. The current-voltage characteristics were measured and two types of resonant tunneling of Cooper pairs were observed at different magnetic fields.
Niobium/aluminum-oxide/niobium Josephson tunnel junctions have been fabricated using electron beam evaporation to form all-metal films in a high vacuum system. A quality factor, V m (the product of the maximum dc Josephson current and the subgap resistance defined at 2 mV) between 36–37 mV, has been obtained for the best junctions of a 6 nm-thick Al layer by cooling down the surface of the base electrode for 100 minutes under a high background pressure, before the deposition of aluminum, after the formation of the base niobium electrode. An array of 80 series-connected junctions has also been fabricated using the selective niobium anodization process and the planarization process. The current-voltage characteristics of the array showed a standard deviation of the maximum dc Josephson current of 3.3%.
We present the latest development of an Nb/Al-AlOx/Nb Josephson junction fabrication process for superconducting integrated circuits at SIMIT. Our fabrication process has four niobium superconducting layers and one Ti/Pd resistor layer with 1.0 Ω/square sheet resistor for junction shunting and circuit biasing. Critical current density Jcof the junctions is controlled from 30 A/cm2to 10 kA/cm2by exposing aluminum layer to pure or mixed O2atmosphere. Correlation between measured Jcand exposure conditions has been established. Average quality factor (Rsg/Rn) of the junctions in our process is larger than 20 with subgap leakage factor (Vm) beyond 30 mV. Critical current uniformity is obtained according to the switching current (Is) distribution of a 1000-JJ array. Measured standard deviation sigma of Isis less than 4% over the 100-mm wafer. Plasma resonance in a large Josephson junction is used to measure specific capacitance (Cs) of the junction. Sheet inductances of superconducting niobium strip-lines are extracted by a SQUID diagnose circuit and the measured results show good agreement with our design values.
We have developed a fabrication process for nanoscale tunnel junctions which includes focused-ion-beam etching from different directions. By applying the process to a Nb/(Al–)Al2O3/Nb trilayer, we have fabricated a Nb single-electron transistor (SET), and characterized the SET at low temperatures, T=0.04–40 K. The superconducting gap energy and the transition temperature of the Nb SET agree with the bulk values, which suggests high quality Nb junctions. The single-electron charging energy of the SET is estimated to be larger than 1 K.
We review experiments on small-capacitance Josephson junctions. When the Josephson junction is fabricated in the configuration of dc superconducting quantum interference device (SQUID), the Josephson coupling can be tuned IN SITU with an external magnetic field. The electrical transport properties of one-dimensional arrays of small-capacitance dc SQUIDs have been investigated in order to study the superconductor-insulator transition. The arrays have also been used to bias a single Josephson junction, and a clear Coulomb blockade of Cooper-pair tunneling has been observed in the single junction.