IEEE Transactions on Applied Superconductivity
Development of Nb/Al–AlOx/Nb Tunnel Junction for Large-Scale Integrated Digital Circuits
Wei Xiong, Liliang Ying, Yu Wu, Jie Ren, Wei Peng, Zhen Wang
Abstract
We present the latest development of an Nb/Al-AlOx/Nb Josephson junction fabrication process for superconducting integrated circuits at SIMIT. Our fabrication process has four niobium superconducting layers and one Ti/Pd resistor layer with 1.0 Ω/square sheet resistor for junction shunting and circuit biasing. Critical current density Jcof the junctions is controlled from 30 A/cm2to 10 kA/cm2by exposing aluminum layer to pure or mixed O2atmosphere. Correlation between measured Jcand exposure conditions has been established. Average quality factor (Rsg/Rn) of the junctions in our process is larger than 20 with subgap leakage factor (Vm) beyond 30 mV. Critical current uniformity is obtained according to the switching current (Is) distribution of a 1000-JJ array. Measured standard deviation sigma of Isis less than 4% over the 100-mm wafer. Plasma resonance in a large Josephson junction is used to measure specific capacitance (Cs) of the junction. Sheet inductances of superconducting niobium strip-lines are extracted by a SQUID diagnose circuit and the measured results show good agreement with our design values.