Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal de Physique IV (Proceedings)

An atom interferometer using thermal lithium atoms

Alain Miffre, Marion Jacquey, R. Delhuille, M Büchner, Carlo Rizzo, G. Trénec, J. Vigué

Published Nov 1, 2004• 0 citations
Publisher

Abstract

Abstract. We have built an atom interferometer of the Mach-Zehnder type, operating with thermal lithium atoms [1]. Its design is largely inspired by previous works done by the groups of D. Pritchard [2], A. Zeilinger [3] and S.A. Lee [4]. In our apparatus, the atomic wave is diffracted in the Bragg regime by three laser sanding waves to achieve a Mach-Zehnder configuration. This paper briefly recalls the diffraction process and shows the experimental results obtained in our group. Our apparatus is able to achieve a high fringe contrast of 74 % with a large mean detected atom flux of 1.5 × 104 s-1. Finally, the paper ends with the measurement of the velocity distribution of our lithium beam using a light induced fluorescence technique. 1. DIFFRACTION OF THE LITHIUM ATOMIC WAVE IN THE BRAGG REGIME Diffraction of an atomic wave by a laser standing wave in the Bragg regime is in complete analogy with diffraction of x-rays by a crystal. The laser standing wave acts as a thick phase grating for the atomic wave with a periodicity of half the laser wavelength λ r. The diffraction process is governed by conservation of momentum and energy. With a thick laser wave, momentum is transferred from the laser to the incident atomic wave only when the Bragg condition λr sin(θB) = pλdB is fulfilled, where θB is the Bragg angle and p is the diffraction order. For lithium, λr = 671 nm, and the first order diffraction angle is θ1 = 2θB = 170 µrad. Diffraction of the lithium atomic wave is seen by tuning the angle i between the mirror and the atomic beam axis as shown in figure 1a. Figure 1b presents the zero-order beam intensity measured with our detector. This signal is symmetrical around the beam axis and the Bragg condition is fulfilled for ±1 diffraction orders. Figure 1a. Experimental set-up for Bragg diffraction. Figure 1b. Zero-order beam intensity as a function of the angle i between the mirror and the beam axis.

DOI
10.1051/jp4:2004119072

Related papers

Lithium atom interferometry

Marion Jacquey, Alain Miffre, M Büchner +2 more

Abstract. We have built an atom interferometer of the Mach Zehnder type. The atomic wave (dB = 54 pm) is a supersonic beam of lithium seeded in argon. The realization of mirrors and beams splitters for the atomic wave relies on elastic Bragg diffraction on laser standing waves at = 671 nm. We first present our experimental setup and signals with atomic fringes which exhibit a very high visibility, up to 84.5 ± 1%, and a very large phase sensitivity. This phase sensitivity is then used to perform an absolute measurement of the lithium atom electric polarizability by applying an electric field on only one atomic beam in the interferometer. Our result, = (24.33 ± 0.16) × 10−30 m3, reduces by a factor three the uncertainty of the best previous measurement. 1.

Journal de Physique IV (Proceedings)•Oct 1, 2006•3 citations

Modulation of atomic de Broglie waves using Bragg diffraction

Stefan Bernet, Markus K. Oberthaler, Roland Abfalterer +2 more

Bragg diffraction of atoms at thick standing light waves requires that the wave-matching condition is fulfilled. This usually means that the atomic beam crosses the light wave exactly at the Bragg angle. Nevertheless, our experiments also demonstrate Bragg diffraction at detuned angles if the amplitude of the standing light wave is temporally modulated with an appropriate frequency. If, on the other hand, the phase of the light wave is modulated no diffraction is observed. Both modulation processes produce frequency sidebands which set up `slowly travelling standing waves' in front of a retro-reflection mirror. Atoms are diffracted at these `almost standing' light waves in a similar way to photons at the travelling sound waves in an acousto-optic modulator. The frequency of the diffracted de Broglie waves is assumed to be shifted by the intensity modulation frequency. The different results using amplitude- and phase-modulated light waves are due to interference between the diffraction contributions of the individual frequency sidebands contained in the standing light wave.

Quantum and Semiclassical Optics Journal of the European Optical Society Part B•Jun 1, 1996•15 citations

Measurement of the refraction index for atom waves

Marion Jacquey, M Büchner, G. Trénec +1 more

We have developed a Mach-Zehnder atom interferometer which uses elastic diffraction of lithium atom on laser standing waves for the coherent manipulation of the atom wave. The interference signal is of sufficient quality to achieve a phase sensitivity near 10 milliradians/. With this apparatus, we have recently measured the index of refraction of several gases for lithium waves. The interference signals give access to the real and imaginary parts of () and we have tested the linear dependence of these two quantities with gas density. The measured values of () are in good agreement with calculations and they exhibit glory oscillations, as predicted by theory.

Annales de Physique•Jan 1, 2007•0 citations

Atom Interferometer Based on Bragg Scattering from Standing Light Waves

David M. Giltner, Roger W. McGowan, S. A. Lee

We have constructed an atom interferometer by Bragg deflecting a collimated beam of metastable neon atoms from three parallel standing waves. Interference fringes have been observed using atoms Bragg scattered at up to the third order, giving a maximum of $6\ensuremath{\Elzxh}k$ transverse momentum difference between the two arms of the interferometer. In the first order case we have achieved a fringe contrast of 62% and a peak to peak signal of 1700 atoms/s. We believe this to be the highest fringe contrast that has been achieved in atom interferometers.

Physical Review Letters•Oct 2, 1995•265 citations

Mechanisms of matter-wave diffraction and their application to interferometers

Enno Giese

Light pulses have proven to be a powerful and versatile tool to implement beam splitters and mirrors for matter waves enabling atom interferometers. However, for high-precision measurements with such devices the specific realization is crucial and novel techniques might increase the sensitivity. To illustrate the diversity of light-pulse beam splitting and the subtle differences between the diffraction mechanisms, we study atomic Raman, Bragg, and the new method of double Bragg diffraction in a coherent way. Moreover, we introduce a versatile formalism to determine the interference signal of a Mach-Zehnder geometry and give an interpretation in terms of proper-time difference. In addition, we explore the feasibility of a specular mirror for atoms, which might lead to an interferometer testing the equivalence principle.

Fortschritte der Physik•Jun 1, 2015•33 citations

Monolithic atom interferometry

Johannes Fiedler, Kim Lefmann, Wolf von Klitzing +1 more

Atom and, more recently, molecule interferometers are used in fundamental research and industrial applications. Most atom interferometers rely on gratings made from laser beams, which can provide high precision, but cannot reach very short wavelengths and require complex laser systems to function. Contrary to this, simple monolithic interferometers cut from single crystals offer (sub) nanometer wavelengths with an extreme level of stability and robustness. Such devices were conceived and demonstrated several decades ago for neutrons and electrons. Here, we propose a monolithic design for a thermal-beam molecule interferometer based on (quantum) reflection. We show, as an example, how a reflective, monolithic interferometer (Mach-Zehnder type) can be realized for a helium beam using $\mathrm{Si}(111)\text{\ensuremath{-}}\mathrm{H}(1\ifmmode\times\else\texttimes\fi{}1)$ surfaces, which have previously been demonstrated to act as very robust and stable diffractive mirrors for neutral helium atoms.

arXiv:2307.02285•Physical Review A•Aug 7, 2023•6 citations
Abstract. We have built an atom interferometer of the Mach-Zehnder type, operating with thermal lithium atoms [1]. Its design is largely inspired by previous works done by the groups of D. Pritchard [2], A. Zeilinger [3] and S.A. Lee [4]. In our apparatus, the atomic wave is diffracted in the Bragg regime by three laser sanding waves to achieve a Mach-Zehnder configuration. This paper briefly recalls the diffraction process and shows the experimental results obtained in our group. Our apparatus is able to achieve a high fringe contrast of 74 % with a large mean detected atom flux of 1.5 × 104 s-1. Finally, the paper ends with the measurement of the velocity distribution of our lithium beam using a light induced fluorescence technique. 1. DIFFRACTION OF THE LITHIUM ATOMIC WAVE IN THE BRAGG REGIME Diffraction of an atomic wave by a laser standing wave in the Bragg regime is in complete analogy with diffraction of x-rays by a crystal. The laser standing wave acts as a thick phase grating for the atomic wave with a periodicity of half the laser wavelength λ r. The diffraction process is governed by conservation of momentum and energy. With a thick laser wave, momentum is transferred from the laser to the incident atomic wave only when the Bragg condition λr sin(θB) = pλdB is fulfilled, where θB is the Bragg angle and p is the diffraction order. For lithium, λr = 671 nm, and the first order diffraction angle is θ1 = 2θB = 170 µrad. Diffraction of the lithium atomic wave is seen by tuning the angle i between the mirror and the atomic beam axis as shown in figure 1a. Figure 1b presents the zero-order beam intensity measured with our detector. This signal is symmetrical around the beam axis and the Bragg condition is fulfilled for ±1 diffraction orders. Figure 1a. Experimental set-up for Bragg diffraction. Figure 1b. Zero-order beam intensity as a function of the angle i between the mirror and the beam axis.
Abstract. We have built an atom interferometer of the Mach Zehnder type. The atomic wave (dB = 54 pm) is a supersonic beam of lithium seeded in argon. The realization of mirrors and beams splitters for the atomic wave relies on elastic Bragg diffraction on laser standing waves at = 671 nm. We first present our experimental setup and signals with atomic fringes which exhibit a very high visibility, up to 84.5 ± 1%, and a very large phase sensitivity. This phase sensitivity is then used to perform an absolute measurement of the lithium atom electric polarizability by applying an electric field on only one atomic beam in the interferometer. Our result, = (24.33 ± 0.16) × 10−30 m3, reduces by a factor three the uncertainty of the best previous measurement. 1.
Bragg diffraction of atoms at thick standing light waves requires that the wave-matching condition is fulfilled. This usually means that the atomic beam crosses the light wave exactly at the Bragg angle. Nevertheless, our experiments also demonstrate Bragg diffraction at detuned angles if the amplitude of the standing light wave is temporally modulated with an appropriate frequency. If, on the other hand, the phase of the light wave is modulated no diffraction is observed. Both modulation processes produce frequency sidebands which set up `slowly travelling standing waves' in front of a retro-reflection mirror. Atoms are diffracted at these `almost standing' light waves in a similar way to photons at the travelling sound waves in an acousto-optic modulator. The frequency of the diffracted de Broglie waves is assumed to be shifted by the intensity modulation frequency. The different results using amplitude- and phase-modulated light waves are due to interference between the diffraction contributions of the individual frequency sidebands contained in the standing light wave.
We have developed a Mach-Zehnder atom interferometer which uses elastic diffraction of lithium atom on laser standing waves for the coherent manipulation of the atom wave. The interference signal is of sufficient quality to achieve a phase sensitivity near 10 milliradians/. With this apparatus, we have recently measured the index of refraction of several gases for lithium waves. The interference signals give access to the real and imaginary parts of () and we have tested the linear dependence of these two quantities with gas density. The measured values of () are in good agreement with calculations and they exhibit glory oscillations, as predicted by theory.
We have constructed an atom interferometer by Bragg deflecting a collimated beam of metastable neon atoms from three parallel standing waves. Interference fringes have been observed using atoms Bragg scattered at up to the third order, giving a maximum of $6\ensuremath{\Elzxh}k$ transverse momentum difference between the two arms of the interferometer. In the first order case we have achieved a fringe contrast of 62% and a peak to peak signal of 1700 atoms/s. We believe this to be the highest fringe contrast that has been achieved in atom interferometers.
Light pulses have proven to be a powerful and versatile tool to implement beam splitters and mirrors for matter waves enabling atom interferometers. However, for high-precision measurements with such devices the specific realization is crucial and novel techniques might increase the sensitivity. To illustrate the diversity of light-pulse beam splitting and the subtle differences between the diffraction mechanisms, we study atomic Raman, Bragg, and the new method of double Bragg diffraction in a coherent way. Moreover, we introduce a versatile formalism to determine the interference signal of a Mach-Zehnder geometry and give an interpretation in terms of proper-time difference. In addition, we explore the feasibility of a specular mirror for atoms, which might lead to an interferometer testing the equivalence principle.
Atom and, more recently, molecule interferometers are used in fundamental research and industrial applications. Most atom interferometers rely on gratings made from laser beams, which can provide high precision, but cannot reach very short wavelengths and require complex laser systems to function. Contrary to this, simple monolithic interferometers cut from single crystals offer (sub) nanometer wavelengths with an extreme level of stability and robustness. Such devices were conceived and demonstrated several decades ago for neutrons and electrons. Here, we propose a monolithic design for a thermal-beam molecule interferometer based on (quantum) reflection. We show, as an example, how a reflective, monolithic interferometer (Mach-Zehnder type) can be realized for a helium beam using $\mathrm{Si}(111)\text{\ensuremath{-}}\mathrm{H}(1\ifmmode\times\else\texttimes\fi{}1)$ surfaces, which have previously been demonstrated to act as very robust and stable diffractive mirrors for neutral helium atoms.