Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

Note: Efficient generation of optical sidebands at GHz with a high-power tapered amplifier

Jake Zappala, K. Bailey, Zheng‐Tian Lu, Thomas P. O’Connor, Wei Jiang

Published Apr 1, 2014• 2 citations
Publisher

Abstract

Two methods using a laser-diode tapered amplifier to produce high-power, high-efficiency optical frequency sidebands over a wide tunable frequency range are studied and compared. For a total output of 500 mW at 811 nm, 20% of the power can be placed in each of the first-order sidebands. Functionality and characterization are presented within the sideband frequency region of 0.8-2.3 GHz, and it is shown that both methods can be applied beyond this frequency range. These methods provide a versatile and effective tool for atomic physics experiments.

DOI
10.1063/1.4870412

Related papers

Microwave sidebands for laser cooling by direct modulation of a tapered amplifier

J. Mahnke, Sascha Kulas, I. Geisel +3 more

Laser cooling of atoms usually necessitates several laser frequencies. Alkaline atoms, for example, are cooled by two lasers with a frequency difference in the gigahertz range. This gap cannot be closed with simple shifting techniques. Here, we present a method of generating sidebands at 6.6 GHz by modulating the current of a tapered amplifier, which is seeded by an unmodulated master laser. The sidebands enable trapping of 1.1 × 10(9) (87)Rb atoms in a chip-based magneto-optical trap. Compared to the direct modulation of the master laser, this method allows for an easy implementation, a fast adjustment over a wide frequency range, and the simultaneous extraction of unmodulated light for manipulation and detection. The low power consumption, small size, and applicability for multiple frequencies benefit a wide range of applications reaching from atom-based mobile sensors to the laser cooling of molecules.

arXiv:1306.0402•Review of Scientific Instruments•Jun 1, 2013•1 citation

Investigating the frequency-dependent amplification of a tapered amplifier in atom interferometers

Su Zhan, Xiao‐Chun Duan, Min-Kang Zhou +3 more

We present the investigation on the frequency-dependent amplification (FDA) of a tapered amplifier (TA) and the corresponding influence on Raman-type atom interferometers. In our interferometer, the output of two phase-locked diode lasers is injected into a TA to generate Raman beams. The frequency of one laser is chirped during the interfering process, which induces a variance of the Raman lasers power as a result of the FDA of the TA. The corresponding power ratio variation of the Raman lasers is measured by beat note method, which shows a linear dependence with a slope of -0.087(4)/GHz when the laser frequency changes over 2 GHz at 780 nm. The corresponding error related to AC Stark effect due to this frequency-dependent variation is estimated for our atom interferometer. The investigation presented here may provide hints for other experiments involving TAs.

Optics Letters•Dec 15, 2014•16 citations

Parametric four-wave mixing using a single cw laser

Erik Brekke, Laura Alderson

Four-wave mixing can be used to generate coherent output beams, with frequencies difficult to acquire in commercial lasers. Here, a single narrow external cavity diode laser locked to the two photon 5s-5d transition in rubidium is combined with a tapered amplifier system to produce a high power cw beam at 778 nm and used to generate coherent light at 420 nm through parametric four-wave mixing. This process is analyzed in terms of the intensity and frequency of the incoming beam as well as the atomic density of the sample. The efficiency of the process is currently limited when on resonance due to the absorption of the 420 nm beam, and modifications should allow a significant increase in output power.

arXiv:1303.7174•Optics Letters•Jun 12, 2013•37 citations

Intense, wideband optical waveform generation by self-balanced amplification of fiber electro-optical sideband modulation

Yuzhuo Wang, Yizun He, Lingjing Ji +6 more

We demonstrate a simple method to obtain accurate optical waveforms with a gigahertz-level programmable modulation bandwidth and a watt-level output power for wideband optical control of free atoms and molecules.Arbitrary amplitude and phase modulations are transferred from microwave to light with a low-power fiber electro-optical modulator.The sub-milliwatt optical sideband is co-amplified with the optical carrier in a power-balanced fashion through a tapered semiconductor amplifier (TSA).By automatically keeping TSA near saturation in a quasi-continuous manner, typical noise channels associated with pulsed high-gain amplifications are efficiently suppressed.As an example application, we demonstrate interleaved cooling and trapping of two rubidium isotopes with coherent nanosecond pulses.

arXiv:2203.02915•Chinese Optics Letters•Jan 1, 2022•4 citations

Note: Generation of Raman laser beams based on a sideband injection-locking technique using a fiber electro-optical modulator

Hongbo Xue, Yanying Feng, X. J. Wang +2 more

Two phase-coherent Raman laser beams with a frequency offset of 6.835 GHz were generated by sideband injection-locking technique. A master diode laser was phase-modulated at 6.835 GHz by a fiber electro-optic modulator. A slave diode was injection-locked to the -1 sideband of the phase-modulated beam, and another diode was locked to the master laser carrier. This method produced stable and spatially separated Raman lasers with a large frequency shift range (>180 MHz). The relative linewidth of these two beams was ∼1 Hz, and the unwanted carrier mode was suppressed down to -24 dB. Stimulated Raman transitions and Ramsey fringes were driven by Raman lasers in a cold atomic beam.

Review of Scientific Instruments•Apr 1, 2013•12 citations

Switching, amplifying, and chirping diode lasers with current pulses for high bandwidth quantum technologies

Gianni Buser

A series of simple and low-cost devices for switching, amplifying, and chirping diode lasers based on current modulation are presented. Direct modulation of diode laser currents is rarely sufficient to establish precise amplitude and phase control over light, as its effects on these parameters are not independent. These devices overcome this limitation by exploiting amplifier saturation and dramatically outperform commonly used external modulators in key figures of merit for quantum technological applications. Semiconductor optical amplifiers operated on either rubidium D line are recast as intensity switches and shown to achieve ON:OFF ratios >106 in as little as 50 ns. Current is switched to a 795 nm wavelength (Rb D1) tapered amplifier to produce optical pulses of few nanosecond duration and peak powers of 3 W at a similar extinction ratio. Fast rf pulses are applied directly to a laser diode to shift its emission frequency by up to 300 MHz in either direction and at a maximum chirp rate of 150 MHz ns-1. Finally, the latter components are combined, yielding a system that produces watt-level optical pulses with arbitrary frequency chirps in the given range and <2% residual intensity variation, all within 65 ns upon asynchronous demand. Such systems have broad application in atomic, molecular, and optical physics and are of particular interest to fast experiments simultaneously requiring high power and low noise, for example, quantum memory experiments with atomic vapors.

arXiv:2407.18788•Review of Scientific Instruments•Dec 1, 2024•1 citation
Two methods using a laser-diode tapered amplifier to produce high-power, high-efficiency optical frequency sidebands over a wide tunable frequency range are studied and compared. For a total output of 500 mW at 811 nm, 20% of the power can be placed in each of the first-order sidebands. Functionality and characterization are presented within the sideband frequency region of 0.8-2.3 GHz, and it is shown that both methods can be applied beyond this frequency range. These methods provide a versatile and effective tool for atomic physics experiments.
Laser cooling of atoms usually necessitates several laser frequencies. Alkaline atoms, for example, are cooled by two lasers with a frequency difference in the gigahertz range. This gap cannot be closed with simple shifting techniques. Here, we present a method of generating sidebands at 6.6 GHz by modulating the current of a tapered amplifier, which is seeded by an unmodulated master laser. The sidebands enable trapping of 1.1 × 10(9) (87)Rb atoms in a chip-based magneto-optical trap. Compared to the direct modulation of the master laser, this method allows for an easy implementation, a fast adjustment over a wide frequency range, and the simultaneous extraction of unmodulated light for manipulation and detection. The low power consumption, small size, and applicability for multiple frequencies benefit a wide range of applications reaching from atom-based mobile sensors to the laser cooling of molecules.
We present the investigation on the frequency-dependent amplification (FDA) of a tapered amplifier (TA) and the corresponding influence on Raman-type atom interferometers. In our interferometer, the output of two phase-locked diode lasers is injected into a TA to generate Raman beams. The frequency of one laser is chirped during the interfering process, which induces a variance of the Raman lasers power as a result of the FDA of the TA. The corresponding power ratio variation of the Raman lasers is measured by beat note method, which shows a linear dependence with a slope of -0.087(4)/GHz when the laser frequency changes over 2 GHz at 780 nm. The corresponding error related to AC Stark effect due to this frequency-dependent variation is estimated for our atom interferometer. The investigation presented here may provide hints for other experiments involving TAs.
Four-wave mixing can be used to generate coherent output beams, with frequencies difficult to acquire in commercial lasers. Here, a single narrow external cavity diode laser locked to the two photon 5s-5d transition in rubidium is combined with a tapered amplifier system to produce a high power cw beam at 778 nm and used to generate coherent light at 420 nm through parametric four-wave mixing. This process is analyzed in terms of the intensity and frequency of the incoming beam as well as the atomic density of the sample. The efficiency of the process is currently limited when on resonance due to the absorption of the 420 nm beam, and modifications should allow a significant increase in output power.
We demonstrate a simple method to obtain accurate optical waveforms with a gigahertz-level programmable modulation bandwidth and a watt-level output power for wideband optical control of free atoms and molecules.Arbitrary amplitude and phase modulations are transferred from microwave to light with a low-power fiber electro-optical modulator.The sub-milliwatt optical sideband is co-amplified with the optical carrier in a power-balanced fashion through a tapered semiconductor amplifier (TSA).By automatically keeping TSA near saturation in a quasi-continuous manner, typical noise channels associated with pulsed high-gain amplifications are efficiently suppressed.As an example application, we demonstrate interleaved cooling and trapping of two rubidium isotopes with coherent nanosecond pulses.
Two phase-coherent Raman laser beams with a frequency offset of 6.835 GHz were generated by sideband injection-locking technique. A master diode laser was phase-modulated at 6.835 GHz by a fiber electro-optic modulator. A slave diode was injection-locked to the -1 sideband of the phase-modulated beam, and another diode was locked to the master laser carrier. This method produced stable and spatially separated Raman lasers with a large frequency shift range (>180 MHz). The relative linewidth of these two beams was ∼1 Hz, and the unwanted carrier mode was suppressed down to -24 dB. Stimulated Raman transitions and Ramsey fringes were driven by Raman lasers in a cold atomic beam.
A series of simple and low-cost devices for switching, amplifying, and chirping diode lasers based on current modulation are presented. Direct modulation of diode laser currents is rarely sufficient to establish precise amplitude and phase control over light, as its effects on these parameters are not independent. These devices overcome this limitation by exploiting amplifier saturation and dramatically outperform commonly used external modulators in key figures of merit for quantum technological applications. Semiconductor optical amplifiers operated on either rubidium D line are recast as intensity switches and shown to achieve ON:OFF ratios >106 in as little as 50 ns. Current is switched to a 795 nm wavelength (Rb D1) tapered amplifier to produce optical pulses of few nanosecond duration and peak powers of 3 W at a similar extinction ratio. Fast rf pulses are applied directly to a laser diode to shift its emission frequency by up to 300 MHz in either direction and at a maximum chirp rate of 150 MHz ns-1. Finally, the latter components are combined, yielding a system that produces watt-level optical pulses with arbitrary frequency chirps in the given range and <2% residual intensity variation, all within 65 ns upon asynchronous demand. Such systems have broad application in atomic, molecular, and optical physics and are of particular interest to fast experiments simultaneously requiring high power and low noise, for example, quantum memory experiments with atomic vapors.