Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Simplified analysis of direct SQUID readout schemes

D. Drung

Published Apr 21, 2010• 25 citations
Publisher

Abstract

A simple approach to understanding and analyzing direct readout schemes for superconducting quantum interference devices (SQUIDs) is presented. It is shown that the existing methods for suppression of room temperature amplifier noise are based on voltage feedback and current feedback in the SQUID, that were introduced in the original schemes of additional positive feedback and bias current feedback. It is also shown that the way the SQUID is biased (at constant current or voltage) does not affect the noise suppression.

DOI
10.1088/0953-2048/23/6/065006

Related papers

On the AC Bias Readout Schemes for High-TC Superconducting Quantum Interference Devices

Shinya Kuriki, Amane Hayashi, Hiroshi Oyama

The ac bias method is used in the readout system of dc-superconducting quantum interference devices (SQUIDs) to suppress the low-frequency noise that originates in the fluctuation of parameters of two junctions in the SQUID. From the analysis of various schemes of the ac bias method, we propose a simple form which expresses the alternation of the operation variables, i.e., the bias current, modulation flux, and bias flux. We considered the modification of the previous schemes in the context of this form and have found a possible method to directly detect the noise component due to the parameter fluctuation. In the modified ac bias scheme, the low-frequency noise of the parameter fluctuation can either be detected or suppressed by manipulating a single variable. We fabricated the electronics to verify this function, and confirmed the versatility of this method from the measurements of the high-T C SQUID.

Japanese Journal of Applied Physics•Aug 1, 1999•6 citations

An insight into voltage-biased superconducting quantum interference devices

Chao Liu, Yi Zhang, Michael Mück +5 more

We experimentally studied two important parameters of helium-cooled superconducting quantum interference devices (SQUIDs) in the voltage bias mode: the dynamic resistance Rd and the flux-to-current transfer coefficient ∂i/∂Φ, with different junction shunt resistors RJ. We investigated a voltage-biased SQUID using the direct readout current-to-voltage converter scheme involving an operational amplifier. At higher RJ, the flux-to-voltage conversion coefficient ∂V/∂Φ becomes sufficiently large to effectively suppress the room-temperature amplifier's noise without any need for additional feedback circuits. The McCumber parameter limits the rise of ∂V/∂Φ. We discuss the performance of voltage-biased SQUIDs at different effective McCumber parameters.

Applied Physics Letters•Nov 26, 2012•20 citations

An approach to optimization of the superconducting quantum interference device bootstrap circuit

Guofeng Zhang, Yi Zhang, Hui Dong +5 more

Recently, we demonstrated and analysed the superconducting quantum interference device (SQUID) bootstrap circuit (SBC). It is a direct readout scheme for dc SQUID in the voltage bias mode, permitting one to suppress the preamplifier noise. The SBC enables us to control the two key parameters of a voltage-biased SQUID: the flux-to-current transfer coefficient and the dynamic resistance. The flux-to-current, I-Phi, characteristics of SBC are made asymmetric by introducing the additional current feedback. Depending upon the choice of the working point, this feedback can be positive (working point W-2 on the steeper I-Phi slope) or negative (W-1 on the less steep slope). The dynamic resistance is controlled by the additional voltage feedback. In our publications to date we presented only the SBC operation at W-2, while in this paper we demonstrate operation at W-1 and show that also in this regime the preamplifier noise suppression is possible. We used a liquid-helium-cooled Nb SQUID with a loop inductance of 350 pH and attained white flux noise of 2.5 mu Phi(0) Hz(-1/2) both at W-2 and at W-1. In the latter case, the linear flux range exceeded one half-flux quantum Phi(0). This large linear range should lead to a significantly improved stability and slew rate of the system and also make the tolerable spread in circuit parameters much wider than in all SQUID direct readout schemes known to date. Consequently, operation in this regime opens a new path to possible SBC optimization.

Superconductor Science and Technology•Apr 21, 2011•11 citations

Introduction

Yi Zhang, Hui Dong, Hans‐Joachim Krause +2 more

According to the type of superconducting material used, Superconducting QUantum Interference Devices (SQUID) can be divided into two groups: the low-temperature superconducting and the high-temperature superconducting SQUID. Josephson junction (JJ) is the key element of SQUIDs. JJs are analyzed with the resistively and capacitively shunted junction (RCSJ) model, thus introducing two important parameters: the Stewart–McCumber parameter and the thermal rounding parameter. For readout electronics, the DC SQUID is regarded as dynamic resistance Rd modulated by the flux threading into the SQUID loop. In the case of a direct readout scheme where the SQUID directly connects to a preamplifier, the electronics noise is usually much larger than the SQUID intrinsic noise. The techniques of additional positive feedback, bias current feedback, and noise cancellation are categorized and discussed. This chapter introduces two special DC SQUID readout schemes, the two-stage scheme and the double relaxation oscillation (DROS) scheme.

Wiley eBooks•May 29, 2020•0 citations

Noise Performance Comparison Between Current- and Voltage-Bias Readout Schemes for DC SQUID

Yongliang Wang, Guofeng Zhang, Shulin Zhang

There are two bias schemes, namely current-bias and voltage-bias, for the directly coupled readout circuit of direct current superconducting quantum interference device (dc SQUID). In order to find out the difference between two bias schemes, we present the theoretical analyses on their equivalent circuits, working point locations, and noise performances. The theoretical analysis and experimental validation prove that the voltage-bias scheme achieves a larger transfer coefficient and exhibits a better noise performance than the current-bias scheme in the reading of conventional dc SQUID.

IEEE Transactions on Applied Superconductivity•Aug 24, 2021•3 citations

Superconducting quantum interference device readout circuit with tunable feedback polarity

Xinyu Wu, Jianshe Liu, Wei Chen

Feedback circuits, which act as functional units in superconducting quantum interference device (SQUID) readout circuits, such as positive feedback circuits for suppressing the preamplifier noise contribution or negative feedback circuits for increasing the linear flux range of SQUID, enable SQUIDs to achieve high performance in practical applications. Integrating feedback circuits with different functions into a single SQUID chip contributes to the construction of highly compact SQUID electronics. Here, we propose a SQUID readout circuit with tunable feedback polarity (TFP). The switching of the feedback polarity is easily realized by applying a control current to the superconducting switches integrated into the SQUID chip. The enhancement of the flux-to-voltage transfer coefficient or the linear flux range depends on the choice of feedback polarity. In addition, we introduce a two-stage scheme to address the degraded noise performance induced by negative feedback. This work attempts to develop a compact and versatile architecture of SQUID readout by using a set of compatible superconducting technologies.

Review of Scientific Instruments•Sep 1, 2023•1 citation
A simple approach to understanding and analyzing direct readout schemes for superconducting quantum interference devices (SQUIDs) is presented. It is shown that the existing methods for suppression of room temperature amplifier noise are based on voltage feedback and current feedback in the SQUID, that were introduced in the original schemes of additional positive feedback and bias current feedback. It is also shown that the way the SQUID is biased (at constant current or voltage) does not affect the noise suppression.
The ac bias method is used in the readout system of dc-superconducting quantum interference devices (SQUIDs) to suppress the low-frequency noise that originates in the fluctuation of parameters of two junctions in the SQUID. From the analysis of various schemes of the ac bias method, we propose a simple form which expresses the alternation of the operation variables, i.e., the bias current, modulation flux, and bias flux. We considered the modification of the previous schemes in the context of this form and have found a possible method to directly detect the noise component due to the parameter fluctuation. In the modified ac bias scheme, the low-frequency noise of the parameter fluctuation can either be detected or suppressed by manipulating a single variable. We fabricated the electronics to verify this function, and confirmed the versatility of this method from the measurements of the high-T C SQUID.
We experimentally studied two important parameters of helium-cooled superconducting quantum interference devices (SQUIDs) in the voltage bias mode: the dynamic resistance Rd and the flux-to-current transfer coefficient ∂i/∂Φ, with different junction shunt resistors RJ. We investigated a voltage-biased SQUID using the direct readout current-to-voltage converter scheme involving an operational amplifier. At higher RJ, the flux-to-voltage conversion coefficient ∂V/∂Φ becomes sufficiently large to effectively suppress the room-temperature amplifier's noise without any need for additional feedback circuits. The McCumber parameter limits the rise of ∂V/∂Φ. We discuss the performance of voltage-biased SQUIDs at different effective McCumber parameters.
Recently, we demonstrated and analysed the superconducting quantum interference device (SQUID) bootstrap circuit (SBC). It is a direct readout scheme for dc SQUID in the voltage bias mode, permitting one to suppress the preamplifier noise. The SBC enables us to control the two key parameters of a voltage-biased SQUID: the flux-to-current transfer coefficient and the dynamic resistance. The flux-to-current, I-Phi, characteristics of SBC are made asymmetric by introducing the additional current feedback. Depending upon the choice of the working point, this feedback can be positive (working point W-2 on the steeper I-Phi slope) or negative (W-1 on the less steep slope). The dynamic resistance is controlled by the additional voltage feedback. In our publications to date we presented only the SBC operation at W-2, while in this paper we demonstrate operation at W-1 and show that also in this regime the preamplifier noise suppression is possible. We used a liquid-helium-cooled Nb SQUID with a loop inductance of 350 pH and attained white flux noise of 2.5 mu Phi(0) Hz(-1/2) both at W-2 and at W-1. In the latter case, the linear flux range exceeded one half-flux quantum Phi(0). This large linear range should lead to a significantly improved stability and slew rate of the system and also make the tolerable spread in circuit parameters much wider than in all SQUID direct readout schemes known to date. Consequently, operation in this regime opens a new path to possible SBC optimization.
According to the type of superconducting material used, Superconducting QUantum Interference Devices (SQUID) can be divided into two groups: the low-temperature superconducting and the high-temperature superconducting SQUID. Josephson junction (JJ) is the key element of SQUIDs. JJs are analyzed with the resistively and capacitively shunted junction (RCSJ) model, thus introducing two important parameters: the Stewart–McCumber parameter and the thermal rounding parameter. For readout electronics, the DC SQUID is regarded as dynamic resistance Rd modulated by the flux threading into the SQUID loop. In the case of a direct readout scheme where the SQUID directly connects to a preamplifier, the electronics noise is usually much larger than the SQUID intrinsic noise. The techniques of additional positive feedback, bias current feedback, and noise cancellation are categorized and discussed. This chapter introduces two special DC SQUID readout schemes, the two-stage scheme and the double relaxation oscillation (DROS) scheme.
There are two bias schemes, namely current-bias and voltage-bias, for the directly coupled readout circuit of direct current superconducting quantum interference device (dc SQUID). In order to find out the difference between two bias schemes, we present the theoretical analyses on their equivalent circuits, working point locations, and noise performances. The theoretical analysis and experimental validation prove that the voltage-bias scheme achieves a larger transfer coefficient and exhibits a better noise performance than the current-bias scheme in the reading of conventional dc SQUID.
Feedback circuits, which act as functional units in superconducting quantum interference device (SQUID) readout circuits, such as positive feedback circuits for suppressing the preamplifier noise contribution or negative feedback circuits for increasing the linear flux range of SQUID, enable SQUIDs to achieve high performance in practical applications. Integrating feedback circuits with different functions into a single SQUID chip contributes to the construction of highly compact SQUID electronics. Here, we propose a SQUID readout circuit with tunable feedback polarity (TFP). The switching of the feedback polarity is easily realized by applying a control current to the superconducting switches integrated into the SQUID chip. The enhancement of the flux-to-voltage transfer coefficient or the linear flux range depends on the choice of feedback polarity. In addition, we introduce a two-stage scheme to address the degraded noise performance induced by negative feedback. This work attempts to develop a compact and versatile architecture of SQUID readout by using a set of compatible superconducting technologies.