Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Multistage two-dimensional magneto-optical trap as a compact cold atom beam source

Jaime Ramirez-Serrano, Nan Yu, James M. Kohel, James R. Kellogg, Lute Maleki

Published Mar 15, 2006• 21 citations
Publisher

Abstract

A compact cold atom beam source based on a multistage two-dimensional magneto-optical trap (MOT) has been demonstrated and characterized. The multiple-stage design greatly reduces the overall size of the source apparatus while providing a high flux of atoms. The cold atom beam was used to load a separate MOT in ultrahigh vacuum, and we obtained an actual trap loading rate of 1.5 x 109 atoms/s while using only 20 mW of total laser power for the source. The entire source apparatus, including optics, can fit into a 4 cm x 4 cm x 13 cm volume.

DOI
10.1364/ol.31.000682

Related papers

High-flux cold Li 6 and Rb 87 atoms from compact two-dimensional magneto-optical traps

Yun-Xuan Lu, An-Wei Zhu, Christine Frank +2 more

Integrating two chemically distinct atomic species into a miniaturized, high-flux cold-atom source is a key challenge for modern experiments with ultracold atomic mixtures and polar molecules. Here, we report a compact setup with in-series two-dimensional magneto-optical traps (2D MOTs) that provides high-flux cold lithium and rubidium atoms. Thanks to the efficient short-distance Zeeman slowing, the maximum 3D MOT loading rate of lithium atoms reaches a record value of 6.6 × 10 9 atoms/s at a moderate lithium-oven temperature of 372 degrees Celsius, which is 44 times higher than that without the Zeeman slowing light. The flux of rubidium is also as high as 2.3 × 10 9 atoms/s with the rubidium oven held at room temperature. Meanwhile, the entire vacuum-chamber system, including an ultra-high-vacuum science cell, is within a small volume of 65 × 55 × 70 cm 3 . Our work represents a substantial improvement over traditional bulky and complex dual-species cold-atom setups. It provides a good starting point for the fast production of a double-degenerate lithium-rubidium atomic mixture and large samples of ultracold lithium-rubidium ground-state molecules.

arXiv:2512.24177•Physical Review A•Apr 16, 2026•0 citations

Cold Atom Source Containing Multiple Magneto-Optical Traps

Jaime Ramirez-Serrano, James M. Kohel, James R. Kellogg +3 more

An apparatus that serves as a source of a cold beam of atoms contains multiple two-dimensional (2D) magneto-optical traps (MOTs). (Cold beams of atoms are used in atomic clocks and in diverse scientific experiments and applications.) The multiple-2D-MOT design of this cold atom source stands in contrast to single-2D-MOT designs of prior cold atom sources of the same type. The advantages afforded by the present design are that this apparatus is smaller than prior designs.

•Oct 1, 2007•0 citations

Direct comparison between a two-dimensional magneto-optical trap and a Zeeman slower as sources of cold sodium atoms

Edwin Pedrozo-Peñafiel, Franklin J. Vivanco, P. C. M. Castilho +3 more

Abstract The atom source is a relevant component in many atomic molecular optics experiments. The compactness and efficiency of the source are fundamental issues, acquiring more importance as the complexity of the experiments increases. Characterizing new techniques to produce high atom flux is necessary to know the efficiency and peculiarities of each one. This allows choosing the most suitable source for a specific experiment. In this work, we show a direct comparison between a two-dimensional magneto-optical trap (2D-MOT) and a Zeeman slower (ZS) as source of cold sodium atoms to load a standard three-dimensional magneto-optical trap. The optimum parameters for each case are obtained by observing the loading rate and the final number of atoms in the 3D-MOT. We conclude that the 2D-MOT provides a high flux of atoms comparable with that produced by the ZS, but with an enormous advantage with respect to the size of the apparatus.

Laser Physics Letters•May 12, 2016•12 citations

High-flux, adjustable, compact cold-atom source

Sean Ravenhall, Benjamin Yuen, Christopher J. Foot

Magneto-optical traps (MOTs) are widely used for laser cooling of atoms. We have developed a high-flux compact cold-atom source based on a pyramid MOT with a unique adjustable aperture that is highly suitable for portable quantum technology devices, including space-based experiments. The adjustability enabled an investigation into the previously unexplored impact of aperture size on the atomic flux, and optimisation of the aperture size allowed us to demonstrate a higher flux than any reported cold-atom sources that use a pyramid, LVIS, 3D-MOT or grating MOT. We achieved 2.1(1) × 1010 atoms/s of 87Rb with a mean velocity of 32(1) m/s, FWHM of 27.6(9) m/s and divergence of 59(4) mrad. Halving the total optical power to 195 mW caused only a 20% reduction of the flux, and a 30% decrease in mean velocity. Methods to further decrease the velocity as required have been identified. The low power consumption and small size make this design suitable for a wide range of cold-atom technologies.

arXiv:2102.00251•Optics Express•May 17, 2021•22 citations

Two-dimensional magneto-optical trap as a source for cold strontium atoms

Ingo Nosske, Luc Couturier, Fachao Hu +6 more

We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity of a pushing beam accelerating the atoms out of the source. An atomic flux exceeding ${10}^{9}\phantom{\rule{0.28em}{0ex}}\mathrm{atoms}/\mathrm{s}$ at a rather moderate oven temperature of $500{\phantom{\rule{0.16em}{0ex}}}^{\ensuremath{\circ}}\mathrm{C}$ is achieved. The longitudinal velocity of the atomic beam can be tuned over several tens of m/s by adjusting the power of the pushing laser beam. The beam divergence is around 60 mrad, determined by the transverse velocity distribution of the cold atoms. The slow atom source is used to load a three-dimensional magneto-optical trap realizing loading rates up to ${10}^{9}\phantom{\rule{0.16em}{0ex}}\mathrm{atoms}/\mathrm{s}$ without indication of saturation of the loading rate for increasing oven temperature. The compact setup avoids undesired effects found in alternative sources like, e.g., Zeeman slowers, such as vacuum contamination and black-body radiation due to the hot strontium oven.

Physical Review A•Nov 15, 2017•62 citations

A Simplified Cold Atom Source for 3-D MOT Loading

Xiaolong Wang, Bing Cheng, Bin Wu +2 more

A simplified two-dimensional (2-D) magneto-optical trap (MOT) for loading atoms into a 3-D MOT is realized. Instead of utilizing multiple wave plates and beam splitters to cover a large cooling region, we deploy cooling beams with elliptical cross-section profiles to achieve a comparable cooling volume. This simplification reduces the cost and difficulty of alignment. The 3-D MOT achieves a loading rate of 2 × 10 8 atoms per second via this simplified 2-D MOT. Correlation between the loading rate and parameters of optical system is also determined.

Chinese Physics Letters•May 1, 2011•10 citations
A compact cold atom beam source based on a multistage two-dimensional magneto-optical trap (MOT) has been demonstrated and characterized. The multiple-stage design greatly reduces the overall size of the source apparatus while providing a high flux of atoms. The cold atom beam was used to load a separate MOT in ultrahigh vacuum, and we obtained an actual trap loading rate of 1.5 x 109 atoms/s while using only 20 mW of total laser power for the source. The entire source apparatus, including optics, can fit into a 4 cm x 4 cm x 13 cm volume.
Integrating two chemically distinct atomic species into a miniaturized, high-flux cold-atom source is a key challenge for modern experiments with ultracold atomic mixtures and polar molecules. Here, we report a compact setup with in-series two-dimensional magneto-optical traps (2D MOTs) that provides high-flux cold lithium and rubidium atoms. Thanks to the efficient short-distance Zeeman slowing, the maximum 3D MOT loading rate of lithium atoms reaches a record value of 6.6 × 10 9 atoms/s at a moderate lithium-oven temperature of 372 degrees Celsius, which is 44 times higher than that without the Zeeman slowing light. The flux of rubidium is also as high as 2.3 × 10 9 atoms/s with the rubidium oven held at room temperature. Meanwhile, the entire vacuum-chamber system, including an ultra-high-vacuum science cell, is within a small volume of 65 × 55 × 70 cm 3 . Our work represents a substantial improvement over traditional bulky and complex dual-species cold-atom setups. It provides a good starting point for the fast production of a double-degenerate lithium-rubidium atomic mixture and large samples of ultracold lithium-rubidium ground-state molecules.
Abstract The atom source is a relevant component in many atomic molecular optics experiments. The compactness and efficiency of the source are fundamental issues, acquiring more importance as the complexity of the experiments increases. Characterizing new techniques to produce high atom flux is necessary to know the efficiency and peculiarities of each one. This allows choosing the most suitable source for a specific experiment. In this work, we show a direct comparison between a two-dimensional magneto-optical trap (2D-MOT) and a Zeeman slower (ZS) as source of cold sodium atoms to load a standard three-dimensional magneto-optical trap. The optimum parameters for each case are obtained by observing the loading rate and the final number of atoms in the 3D-MOT. We conclude that the 2D-MOT provides a high flux of atoms comparable with that produced by the ZS, but with an enormous advantage with respect to the size of the apparatus.
Magneto-optical traps (MOTs) are widely used for laser cooling of atoms. We have developed a high-flux compact cold-atom source based on a pyramid MOT with a unique adjustable aperture that is highly suitable for portable quantum technology devices, including space-based experiments. The adjustability enabled an investigation into the previously unexplored impact of aperture size on the atomic flux, and optimisation of the aperture size allowed us to demonstrate a higher flux than any reported cold-atom sources that use a pyramid, LVIS, 3D-MOT or grating MOT. We achieved 2.1(1) × 1010 atoms/s of 87Rb with a mean velocity of 32(1) m/s, FWHM of 27.6(9) m/s and divergence of 59(4) mrad. Halving the total optical power to 195 mW caused only a 20% reduction of the flux, and a 30% decrease in mean velocity. Methods to further decrease the velocity as required have been identified. The low power consumption and small size make this design suitable for a wide range of cold-atom technologies.
We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity of a pushing beam accelerating the atoms out of the source. An atomic flux exceeding 109atoms/s{10}^{9}\phantom{\rule{0.28em}{0ex}}\mathrm{atoms}/\mathrm{s}109atoms/s at a rather moderate oven temperature of $500{\phantom{\rule{0.16em}{0ex}}}^{\ensuremath{\circ}}\mathrm{C}$ is achieved. The longitudinal velocity of the atomic beam can be tuned over several tens of m/s by adjusting the power of the pushing laser beam. The beam divergence is around 60 mrad, determined by the transverse velocity distribution of the cold atoms. The slow atom source is used to load a three-dimensional magneto-optical trap realizing loading rates up to 109atoms/s{10}^{9}\phantom{\rule{0.16em}{0ex}}\mathrm{atoms}/\mathrm{s}109atoms/s without indication of saturation of the loading rate for increasing oven temperature. The compact setup avoids undesired effects found in alternative sources like, e.g., Zeeman slowers, such as vacuum contamination and black-body radiation due to the hot strontium oven.
A simplified two-dimensional (2-D) magneto-optical trap (MOT) for loading atoms into a 3-D MOT is realized. Instead of utilizing multiple wave plates and beam splitters to cover a large cooling region, we deploy cooling beams with elliptical cross-section profiles to achieve a comparable cooling volume. This simplification reduces the cost and difficulty of alignment. The 3-D MOT achieves a loading rate of 2 × 10 8 atoms per second via this simplified 2-D MOT. Correlation between the loading rate and parameters of optical system is also determined.