Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics Letters

A Simplified Cold Atom Source for 3-D MOT Loading

Xiaolong Wang, Bing Cheng, Bin Wu, Zhaoying Wang, Qiang Lin

Published May 1, 2011• 10 citations
Publisher

Abstract

A simplified two-dimensional (2-D) magneto-optical trap (MOT) for loading atoms into a 3-D MOT is realized. Instead of utilizing multiple wave plates and beam splitters to cover a large cooling region, we deploy cooling beams with elliptical cross-section profiles to achieve a comparable cooling volume. This simplification reduces the cost and difficulty of alignment. The 3-D MOT achieves a loading rate of 2 × 10 8 atoms per second via this simplified 2-D MOT. Correlation between the loading rate and parameters of optical system is also determined.

DOI
10.1088/0256-307x/28/5/053701

Related papers

Multistage two-dimensional magneto-optical trap as a compact cold atom beam source

Jaime Ramirez-Serrano, Nan Yu, James M. Kohel +2 more

A compact cold atom beam source based on a multistage two-dimensional magneto-optical trap (MOT) has been demonstrated and characterized. The multiple-stage design greatly reduces the overall size of the source apparatus while providing a high flux of atoms. The cold atom beam was used to load a separate MOT in ultrahigh vacuum, and we obtained an actual trap loading rate of 1.5 x 109 atoms/s while using only 20 mW of total laser power for the source. The entire source apparatus, including optics, can fit into a 4 cm x 4 cm x 13 cm volume.

Optics Letters•Mar 15, 2006•21 citations

A novel simplified two-dimensional magneto-optical trap as an intense source of slow cesium atoms

N. Castagna, Jocelyne Guéna, Mark D. Plimmer +1 more

We describe the design and performance of a slow atom source based on a 2D magneto-optical trap (MOT) that uses an innovative simple optical configuration. Metal-coated retro-reflecting prisms replace mirrors and quarter-wave plates so the optical power of the cooling laser beam is recycled. This source has been characterised for three different configurations: with and without transverse magnetic field gradient, and with a pusher beam to obtain a 2D+-MOT. The longitudinal velocity is of the order of 25 m·s−1, with a transverse velocity spread ≤1 m·s−1, while the typical atomic flux density obtained is up to 1.3×1014 at ·s−1·m−2 for a cesium vapour pressure of ~4×10−8 mbar in the source. We use this slow atom beam, instead of cesium vapour, to load a 3D moving optical molasses that feeds a continuous cold atom fountain. We obtain a gain of a factor ~20 in the atomic flux launched by the fountain.

The European Physical Journal Applied Physics•Apr 1, 2006•26 citations

Enhanced cold mercury atom production with two-dimensional magneto-optical trap

Ye Zhang, Qixin Liu, Jianfang Sun +2 more

A cold atom source is important for quantum metrology and precision measurement. To reduce the quantum projection noise limit in optical lattice clock, one can increase the number of cold atoms and reduce the dead time by enhancing the loading rate. In this work, we realize an enhanced cold mercury atom source based on a two-dimensional (2D) magneto-optical trap (MOT). The vacuum system is composed of two titanium chambers connected with a differential pumping tube. Two stable cooling laser systems are adopted for the 2D-MOT and the three-dimensional (3D)-MOT, respectively. Using an optimized 2D-MOT and push beam, about 1.3×106 atoms, which are almost an order of magnitude higher than using a pure 3D-MOT, are loaded into the 3D-MOT for 202Hg atoms. This enhanced cold mercury atom source is helpful in increasing the frequency stability of a neutral mercury lattice clock.

Chinese Physics B•Feb 10, 2022•7 citations

Realization of a single-beam, detachable, cascaded 2D magneto-optical trap based modular cesium source

J.Y. Yang, Kaiyue Wang, Sachin Barthwal +1 more

We present a detachable, cascaded modular cesium loading source based on a 2D magneto-optical trap (MOT). Our design utilizes only a single beam of mixed cooling and repumping light that is split evenly into five discrete trapping regions, each with horizontal and vertical beams. The pre-aligned, single-beam design makes our module suitable for miniaturization. The generated cold atomic beam serves to load a 3D MOT, whose loading rate we use to characterize the efficiency of our design. The effect of individual trapping regions relative to the differential tube and to each other on the loading rate has also been examined. Experimental results were compared with a numerical simulation. We are able to obtain an experimental loading rate of nearly 8×10 7 atoms/s and a vapor density of about 3×10 15 atoms/m 3 in our 2D MOT module.

Journal of the Optical Society of America B•Jul 9, 2024•0 citations

Efficient Loading of an Yb MOT on the 1S0 → 1P1 Transition

Zhufang Zhao, Shunxiang Wang, Jun Jian +5 more

We demonstrate efficient loading of an Yb three-dimensional magneto-optical trap (3D MOT) on the 1S0 → 1P1 transition. The experiment employs a two-dimensional magneto-optical trap (2D MOT) as an efficient cold atom source. Through optimization of the 2D MOT, auxiliary Zeeman slower, and push beam parameters that govern atomic capture, we achieve an atomic loading rate of 5 × 106 atoms/s in the 3D MOT, with approximately ∼107 trapped atoms. Our experimental results confirm the successful transfer of a substantial number of atoms from the 2D region to the science chamber via the push beam, providing an experimental foundation for subsequent implementation of narrow-line MOT and two-color MOT.

Photonics•Oct 28, 2025•1 citation

Jet-loaded cold atomic beam source for strontium

Minho Kwon, Aaron Holman, Quan Gan +4 more

We report on the design and characterization of a cold atom source for strontium (Sr) based on a two-dimensional magneto-optical trap (MOT) that is directly loaded from the atom jet of a dispenser. We characterize the atom flux of the source by measuring the loading rate of a three-dimensional MOT. We find loading rates of up to 108 atoms per second. The setup is compact, easy to construct, and has low power consumption. It addresses the longstanding challenge of reducing the complexity of cold beam sources for Sr, which is relevant for optical atomic clocks, quantum simulation, and computing devices based on ultracold Sr.

arXiv:2210.14186•Review of Scientific Instruments•Jan 1, 2023•13 citations
A simplified two-dimensional (2-D) magneto-optical trap (MOT) for loading atoms into a 3-D MOT is realized. Instead of utilizing multiple wave plates and beam splitters to cover a large cooling region, we deploy cooling beams with elliptical cross-section profiles to achieve a comparable cooling volume. This simplification reduces the cost and difficulty of alignment. The 3-D MOT achieves a loading rate of 2 × 10 8 atoms per second via this simplified 2-D MOT. Correlation between the loading rate and parameters of optical system is also determined.
A compact cold atom beam source based on a multistage two-dimensional magneto-optical trap (MOT) has been demonstrated and characterized. The multiple-stage design greatly reduces the overall size of the source apparatus while providing a high flux of atoms. The cold atom beam was used to load a separate MOT in ultrahigh vacuum, and we obtained an actual trap loading rate of 1.5 x 109 atoms/s while using only 20 mW of total laser power for the source. The entire source apparatus, including optics, can fit into a 4 cm x 4 cm x 13 cm volume.
We describe the design and performance of a slow atom source based on a 2D magneto-optical trap (MOT) that uses an innovative simple optical configuration. Metal-coated retro-reflecting prisms replace mirrors and quarter-wave plates so the optical power of the cooling laser beam is recycled. This source has been characterised for three different configurations: with and without transverse magnetic field gradient, and with a pusher beam to obtain a 2D+-MOT. The longitudinal velocity is of the order of 25 m·s−1, with a transverse velocity spread ≤1 m·s−1, while the typical atomic flux density obtained is up to 1.3×1014 at ·s−1·m−2 for a cesium vapour pressure of ~4×10−8 mbar in the source. We use this slow atom beam, instead of cesium vapour, to load a 3D moving optical molasses that feeds a continuous cold atom fountain. We obtain a gain of a factor ~20 in the atomic flux launched by the fountain.
A cold atom source is important for quantum metrology and precision measurement. To reduce the quantum projection noise limit in optical lattice clock, one can increase the number of cold atoms and reduce the dead time by enhancing the loading rate. In this work, we realize an enhanced cold mercury atom source based on a two-dimensional (2D) magneto-optical trap (MOT). The vacuum system is composed of two titanium chambers connected with a differential pumping tube. Two stable cooling laser systems are adopted for the 2D-MOT and the three-dimensional (3D)-MOT, respectively. Using an optimized 2D-MOT and push beam, about 1.3×106 atoms, which are almost an order of magnitude higher than using a pure 3D-MOT, are loaded into the 3D-MOT for 202Hg atoms. This enhanced cold mercury atom source is helpful in increasing the frequency stability of a neutral mercury lattice clock.
We present a detachable, cascaded modular cesium loading source based on a 2D magneto-optical trap (MOT). Our design utilizes only a single beam of mixed cooling and repumping light that is split evenly into five discrete trapping regions, each with horizontal and vertical beams. The pre-aligned, single-beam design makes our module suitable for miniaturization. The generated cold atomic beam serves to load a 3D MOT, whose loading rate we use to characterize the efficiency of our design. The effect of individual trapping regions relative to the differential tube and to each other on the loading rate has also been examined. Experimental results were compared with a numerical simulation. We are able to obtain an experimental loading rate of nearly 8×10 7 atoms/s and a vapor density of about 3×10 15 atoms/m 3 in our 2D MOT module.
We demonstrate efficient loading of an Yb three-dimensional magneto-optical trap (3D MOT) on the 1S0 → 1P1 transition. The experiment employs a two-dimensional magneto-optical trap (2D MOT) as an efficient cold atom source. Through optimization of the 2D MOT, auxiliary Zeeman slower, and push beam parameters that govern atomic capture, we achieve an atomic loading rate of 5 × 106 atoms/s in the 3D MOT, with approximately ∼107 trapped atoms. Our experimental results confirm the successful transfer of a substantial number of atoms from the 2D region to the science chamber via the push beam, providing an experimental foundation for subsequent implementation of narrow-line MOT and two-color MOT.
We report on the design and characterization of a cold atom source for strontium (Sr) based on a two-dimensional magneto-optical trap (MOT) that is directly loaded from the atom jet of a dispenser. We characterize the atom flux of the source by measuring the loading rate of a three-dimensional MOT. We find loading rates of up to 108 atoms per second. The setup is compact, easy to construct, and has low power consumption. It addresses the longstanding challenge of reducing the complexity of cold beam sources for Sr, which is relevant for optical atomic clocks, quantum simulation, and computing devices based on ultracold Sr.